OLYMPUS Upright Metallurgical Microscope System
Model: BX53MTRF
Specification
-Magnification 50X~1000X
-Reflected/Transmitted Light combination
-Long working distance type
-BF, DIC image
-Measurement
-Multi focus, image tiling


Oscilloscope
Model: DSOX2024A
Specification
- 대역폭: 200 MHz
- 최대 샘플링 속도: 2 GSa/s
- 파형 업데이트 속도: 50,000 wfms/s
- 최대 메모리 깊이 1 Mpts image


SourceMeter
Model: Keithley 2450
- V-Ranges: 20mV - 200V
- I-Ranges: 10nA - 1A
- 0.012% Basic Accuracy
- Wideband Noise: 2mVrms
- Sweep types: Linear, Log, Dual Linear, Dual Log, Custom, Source-Memory (2400 SCPI Mode)
- GPIB, USB,Ethernet


Cyclic Optical Transmittance Measurement Device (광 투과도 반복 수명 측정장치)
- Target Specimen size.Max : 30 mm x 40 mm
- Beam spot : 0.8 mm
- Laser sources
1. 12 mW, He-Ne @ 633 nm in open space
2. 80 mW, Diode @ 785 nm with optic fiber
- Operating voltage.Max : ± 10 V (Programmable)
- Current - Voltage curve measurement
- Long-term measurement : over several months


Universal Testing Systems (만능재료시험기)
Model: INSTRON 5948 Microtester (Electromechanical)
- Operating temperature: 10 - 38 [℃]
- Overall size 1500 × 452 × 440 [mm]
- Space between columns: 190 [mm]
- Total crosshead travel: 490 [mm]
- All components weights: 98 [kg]
- Possible testing type: Tension, Compression, Friction, Flexure
- Load capacity (static): ± 2 [kN]
- Testing speed: 0.000024 - 1500 [mm/min]
- Maximum cyclic frequency: 2 [Hz]
- Position resolution: 0.02 μm (up to 1500 mm/min)



Spectrometer
Model: FLAME-S
- Detector: Sony ILX511B Linear silicon CCD array
- Detector range: 190 - 1100 nm
- Pixels: 2048 pixels
- Optical resolution:~0.1 - 10.0 nm FWHM
- Signal-to-noise ratio: 250:1 (full signal)
- Dark noise:50 RMS counts
- Integration time:1 ms - 65 seconds



BOX FURNACE
- Inner Dimension : 200WX200HX300D mm
- Temp. Range : 0℃ ~ 1700℃
- Heating Elements : KANTHAL SUPER 1800 10EA 3/6 Le180XLu180XA25
- Controller : Program Digital PID Control, Controller UP-351
- Etc : Thermocouple "B"-type, Power Supply 220V 2P 7Kw, Gas Flow N2.5l













HUMIDITY CHAMBER: DWTH-155, DAIHAN-BRAND
- Temp./Humidity Range : -20 to 150℃ / 30 to 98% RH
- Compressor : 1/2 hp
- Capacity : 155Lit.
- Dim. Outer : w1025*d1035*h1530 mm
- Dim. Inner : w550*d470*h600 mm









Nanomanipulation and Test Platform
Nanomanipulators
- Step width: 50 to 1500 nm
- Scan range: 1.5μm
- Scan resolution: sub-nm
- Velocity: 13 mm/s
- Operate in UHV

Microforce Sensing Probe
- Model: FT-S10000
- Force range: ±10,000μN
- Sensitivity: 5000μN/V
- Resolution: 0.5 μN

FT-G Microgripper
- Model: FT-G102
- Opening: 0-100 μm
- Force range: ±100 μN
- Sensitivity: 50 μN/V
- Resolution: 0.5 μN



Surface Roughness Profiler
Model: SJ-410, Mitutoyo
Specification
-Measuring range: 25 mm (x-axis), 50 mm (y-axis), 8~800 um (z1-axis)
-Measuring method: Skidless/skidded measurement
-Measuring Force: 0.75 mNor 4mN
-Resolution: 0.001 um
-Sylustip radius: 60°, 2 um
-External I/O: USB I/F, Digimaticoutput, RS232C I/F, External SW I/F





Integrating sphere
Model : 819D-SL-2-CAL2
- Detector Type Sphere Detector
- Sensor Size Ø11.3 mm
- Spectral Range 400 - 1100 nm
- Power Range 100 nW - 2.0 W
- Calibration Uncertainty without Attenuator 2.5% @ 400 - 1000 nm


Optical Power meter
Model : 2936-R
- Number of Channels: 2
- Compatible Detectors 818-xx/DB, 918D (photodiode), 818P, 919P (thermopile), 818E (pyroelectric)
- Computer Interfaces USB and RS-232
- Sampling Rate 250 kHz (10 kHz accessible by user)
- Data Storage 250,000 Point Internal Storage, External Storage Defined by User Supplied USB Drive
- Analog Output 0-1 V, 0-2 V, 0-5 V or 0-10 V (user selectable output impedance)
- Bandwidth Up to 500 kHz (Photodiode), Up to 1 MHz (Thermopile or Pyroelectric), depending on Range
- Accuracy ±0.2 % for CW, ±1 % for Peak to Peak, Pulse to Pulse, and Integration Mode
- Power Requirements 90-240 VAC


Laser Source for transmittance measurement
1. R-30993 ( 633nm )
- Operating Wavelength 633 nm
- Polarization 500:1
- Output Power 12.0 mW
- Longitudinal Mode 316 MHz
- Beam Diameter (1/e2) 0.88 mm
- Beam Divergence Full Angle 0.92 mrad
- Beam Drift, Long Term <0.05 mrad
- CDRH Class IIIb
- Size 533.4 x Ø44.5 mm
- Noise 1.0%
2. STRADUS 785-80 (785nm)
- Wavelength (nm) 785 ± 10
- Power Output (mW) 80 (-0%, +10%)
- Spatial Mode TEM00
- Small Beam (mm, mrad) ~1.1, ~1.0
- Standard Beam (mm, mrad) ~1.4, ~0.6
- Beam Circularity > 90%
- Beam Centration (mm) < 0.5
- Beam Alignment (mrad) < 5
- Pointing Stability (μrad/degree) < 5
- Power Stability (over 24 hours) < 0.5%


Programmable Electrometer
Model: 6514, Kithley
Specification
- < 1fA noise
- > 200TΩ input impedance on voltage measurements
- Charge measurements from 10fC to 20μC
- High speed -- up to 1200 readings/second
- Interfaces readily with switches, computers, and component handlers
- Cancels voltage and current offsets easily


Data Logger
Model: 34972A, Agilent
Specification
- 6 ½-디지트 DMM(22-비트) 및 선택할 수 있는
  8 플러그인 모듈이 포함된 3-슬롯 LXI 데이터 수집 장치
- 열전쌍과 RTD 및 서미스터, DC/AC 전압 또는 전류, 2- 또는 4-와이어 저항,
  주파수 및 주기 등으로 온도가 포함된 11개의 서로 다른 입력 신호를 측정.
- 모든 34970A 스위치 및 컨트롤 플러그인 모듈을 수용하고
  34970A SCPI 명령 세트와 역호환 가능.
- PC로 쉽게 연결하기 위한 1Gbit LAN 및 USB 2.0
- 데이터 저장 또는 전송을 위한 USB 메모리 포트
- 간편한 셋업 및 제어를 위한 그래픽 웹 인터페이스
- BenchLink 데이터 로거 소프트웨어


CURING OVEN (with Vacuum pump)
- Inner Dimension : 450X450X500 mm
- Temp. Range / Accuracy : 0℃ ~ 200℃ / ±1℃
- Controller : Digital Programmable Controller













DIGITAL ULTRASONIC HOMOGENIZER
- Processing Frequency : 20kHz
- Time Control : Digital 1sec ~ 99min / continuous
- Pulsation Control : 10 ~ 100%





PRECISION BALANCE
- Weighing Capacity : 410 g
- Minimum weighing value : 0.001g
- Stabilization time (typical at FAST) : Approximately 1 second
- Pan Size : 128 x 128 mm / 5 x 5 inches
- Standard Interface : RS-232c with Windows Communication Tool (WinCT)







RESISTANCE TEST MACHINE: GOM-801G
- Measures from 20mΩ-20㏀ in 7 Ranges
- 1A High test current
- High resolution 10uΩ
- Hi/Lo comparator indicator
- 3 ½ Digits 0.5" LED display








STRAIN GUAGE MODULE: SCXI-1000
The SCXI-1000
- Rugged, compact 4-slot AC-powered chassis houses any SCXI modules
- Low-noise signal conditioning environment
- Rack-mount, panel mount, and portable options with forced air cooling
- 3 internal analog buses
- NI-DAQ driver simplifies configuration and measurements
- Timing circuitry for high-speed multiplexing






"DAIHAN" "Enterprise" Onestop Fume. Hood, with Ceramic Top & Working Table
- Size : w1800×d800×h2350 mm
■ Durable, Hazardous Chemical Gas Remove
■ Wide Variety of Material for User Selection
■ Slide Type Sash Door with Tempered Safety Glass
■ Powerfull Siroco Fan Blower
* General Chemical Gas Hood with High Thermal, Chemical Resistance, Various Material for User selection.
* Slide type Sash Door with Tempered Safety Glass and Multi-purpose Cabinet stand.
* Stainless steel or "TRESPA" Interior Material, Lead, Ceramic or Granite Working Table.











"BUCHI" Digital Rotary Evaporator
The lab-scale Rotavapor® R-210/R-215 with an evaporation flask size from 50 ml up to 5'000 ml - built on unmatched technology
Technical specifications Rotavapor R-210

- Dimensions (L x H x D) 550 x 575 x 415 mm
- Weight (depending on Glass configuration) 16 - 18 kg without bath
- Operating voltage 100 - 240 V
- Frequency 50/60 Hz
- IP class 21
- Power consumption 60 W (1360W with bath)
- Rotation speed 20 - 280 rpm
- Flask size 50 - 4000 ml
- vMax. flask weight 3 kg
- Display no
- Seal of approval UL, CSA
- Conformity CE




Polisher : GLP-T20/25
- Motor power: 400W X 2
- No. of Disc: two
- No. of Motor: two
- Disc Diameter: 20~250 mm
- Timer: 10 hours
- Control: Touch-pad control & LCD display






High Speed Video Camera : ultima APX-RS, Photron
- Sensor : 10-bit CMOS (Bayer system color, single sensor) with 17um peixels, 16.7ms to 2us global electronic shutter independent of frame rate and overexposure protection
- Saved Image Formats: AVI, JPEG, PNG (10-bit), TIFF, FTIF (10-bit), BMP
- 1024 x 1024 resolution at 3,000 frames per second
- 128 x 16 resolution at 250,000 frames
- 4GB memory





Laser Sensor : LK-G30
- Wavelength : 650 nm
- Light Source Output : 4.8mW max
- Spot diameter (at reference distance) : Ø30 μm
- Reference distance : 30 mm (Diffuse reflection) , 23.5 mm (Regular reflection)
- Measurement range : ±5 mm (Diffuse reflection) , ±4.5 mm (Regular reflection)
- Resolution power : 0.05 μm (0.01 μm)
- Sampling rate : 20/50/100/200/500/1000 μs (Selectable among six steps)




Copyright(c) 2018 Innovative Design & Integrated Manufacturing Lab.   ALL RIGHTS RESERVED.
Department of Mechanical & Aerospace Engineering, Building 313, Room 323, Seoul National University,
Gwanak-Ro 1, Gwanak-Gu, Seoul, 08826, Korea
TEL 82-2-880-9073, 82-2-880-1683, 82-2-886-9074, 82-2-887-9075   FAX 82-2-888-9073
Web Master : Hyun-Taek Lee & Ha Young Kim   E-Mail : wow21star@snu.ac.kr & kimha8812@gmail.com