IDIM Member Publications
Won-Shik Chu


CATEGORY : INTERNATIONAL JOURNAL
[48] Lee, G.Y., Kim, M., Quan, Y.J., Kim, M.S., Kim, T.J.Y., Yoon, H.S., Min, S.K., Kim D. H., Mun, J.W., Oh, J.W., Choi, I.G., Kim, C.S., Chu, W.S., Yang, J., Bhandari, B., Lee, C.M., Ihn, J.B. and Ahn, S.H., Submitted, "Machine health management in smart factory: A review," Journal of Mechanical Science and Technology.
[47] Kim, H., Park, Y., Chu, W.S., Ahn, S.H., Chun, D.M. and Lee, C.S., Submitted, "Kinetic spraying of silver nanowire blended graphite powder to fabricate transparent conductive electrode and their application in electrochromic device," Surface & Coatings Technology (SCIE, ISSN: 0257-8972, IF 2.589).
[46] Kim, N.G., Chu, W.S., Park, H.B., Iakovleva, A., Han, M.W., and Ahn, S.H., Submitted, "The morphing flap of unmanned aerial vehicle using smart soft composite actuator," Soft Robotics (SCIE, ISSN: 2169-5172, IF 8.649, JCR Rank 1/25 in Robotics) , Top journal in Robotics.
[45] Lee, K.T., Bhandari, B., Kim, E.S., Kim, M.S., Poudel, S.R., Chu, W.S., Y. M. Cho, and Ahn, S.H., Submitted, "Design Guide and Cost Estimation of Micro Hydro-Solar-Wind Hybrid Renewable Energy System for off-grid villages," Renewable Energy (SCI(E), Submitted, Updated: 4/9).
[44] Choi, D., Lee, M., Kim, H., Chu, W.S., Chun, D.M., Ahn, S.H. and Lee, C.S., 2018, "Investigation of Dry-deposited Ion Storage Layers using Various Oxide Particles to Enhance Electrochromic Performance," Solar Energy Materials and Solar Cells, Elsevier B.V., Vol. 174, pp. 599-606 (SCI, ISSN: 0927-0248, IF 4.784), January..
[43] Abhishek Sharm, Surajit Mondal, Amit Kumar Mondal, Soumadeep Baksi, Ravi Kumar Patel, Chu, W.S. and Pandey, J.K., 2017, "3D printing: It’s microfluidic functions and environmental impacts," International Journal of Precision Engineering and Manufacturing-Green Technology, Springer, Vol. 4, No. 3, pp. 323-334 (SCIE, ISSN: 2288-6206, IF: 3.494, Top 10% in Manufacturing, Engineering) July 12th.
[42] Khare, V., Sonkaria, S, Lee, G.Y., Ahn, S.H.* and Chu, W.S.* , 2017, "From 3D to 4D Printing - Design, Material Fabrication for Multi-Functional Multi-Materials," International Journal of Precision Engineering and Manufacturing-Green Technology, Springer, Vol. 4, No. 3, pp. 291-299 (SCIE, ISSN: 2288-6206, IF: 3.494, Top 10% in Manufacturing, Engineering), July 12th.
[41] Kim, H., Choi, D., Kim, K., Chu, W.S., Chun, D.M. and Lee, C.S., 2017, "Effect of particle size and amorphous phase on the electrochromic properties of kinetically deposited WO3 films," Solar Energy Materials and Solar Cells, Article in press (SCI, ISSN: 0927-0248, IF 4.784).
[40] Chu, W.S., Kim, M.S., Lee, K.T., Bhandari, B., Lee, G.Y., Yoon, H.S., Kim, H.S., Park, J.I., Bilegt, E., Lee, J.Y., Song, J.H., Park, G. H., Bhandari, P., Lee, C.S., Song, C. and Ahn, S.H., 2017, "Design and Performance Evaluation of Korean Traditional Heating System - Ondol: Case Study in Nepal ," Energy and Buildings, Elsevier, Vol. 138, pp. 406-414, March 1 (SCIE, IF 2.973, JCR Rank 6/124 in Engineering, Civil, ISSN 0378-7788, Updated 2/2), Top 5% in ENGINEERING, CIVIL.
[39] Kim, H.S., Lee, J.Y., Chu, W.S.*, and Ahn, S.H.*, 2017, "Design and Fabrication of Soft Morphing Ray Propulsor: Undulator and Oscillator," Soft Robotics, Vol.4, issue 1, p49-60., (SCI(E), IF 6.130, 1/25 in Robotics), High Impact Article.
[38] Kim, M., Lee, J.Y., Shin, Y.J., Chu, W.S. and Ahn, S.H., 2017, "Pulse Width Modulation as Energy-Saving Strategy of Shape Memory Alloy Based Smart Soft Composite Actuator," International Journal of Precision Engineering and Manufacturing, Volume 18, Issue 6, pp 895–901, June 2017 (SCI(E), IF 1.497, DOI: 10.1007/s12541-017-0106-4, ISSN: 2234-7593, JCR IF Rank: 62/130 (2016) in ENGINEERING, MECHANICAL).
[37] Bhandari, B., Lee, K.T., Chu, W.S., Lee, C.S., Song, C.K., Bhandari, P. and Ahn, S.H., 2017, "Socio-Economic Impact of Renewable Energy-Based Power System in Mountainous Village of Nepal," International Journal of Precision Engineering and Manufacturing–Green Technology, Vol. 4, No. 1, January (SCIE, ISSN: 2286-6206, IF 2.545).
[36] Jeong, H and Chu, W.S., 2016, "Preface for the Special Issue of Hybrid Manufacturing," International Journal of Precision Engineering and Manufacturing-Green Technology, KSPE, Springer, Vol. 3, No. 2, p. 145, April.
[35] Chu, W.S., Kim, M.S., Jang, K.H., Song, J.H., Rodrigue, H., Chun, D.M., Cho, Y. T., Ko, S. H., Cho, K. J., Cha, S. W., Min, S.K., Jeong, S. H., Jeong, H., Lee, C. M., Chu, C. N. and Ahn, S.H., 2016, "From Design for Manufacturing (DFM) to Manufacturing for Design (MFD) via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift," International Journal of Precision Engineering and Manufacturing-Green Technology, KSPE, Springer, Vol. 3, No. 2, pp. 209-222, April.
[34] Park, S.I., Quan, Y.J., Kim, S.H., Kim H., Kim S., Chun, D.M., Lee C. S., Taya M., Chu, W.S.* and Ahn, S.H.*, 2016, "A Review on Fabrication Processes for Electrochromic Devices," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 3, No. 4, pp. 397-421 (SCI(E), IF 2.545, JCR Rank 16/132 in Engineering, Mechanical, ISSN: 2288-6206, DOI 10.1007/s40684-016-0049-8).
[33] Han, M.W., Rodrigue, H., Cho, S., Song, S.H., Wang, W., Chu, W.S., and Ahn, S.H., 2016, "Woven type Smart Soft Composite for Soft Morphing Car Spoiler," Composites Part B: Engineering, Elsevier (Netherlands), Vol. 86, 1 February 2016, pp. 285-298, February (SCI, IF 4.727, JCR Rank 3/85 in Engineering, Multidisciplinary, DOI: 10.1016/j.compositesb.2015.10.009, ISSN 1359-8368).
[32] Song, S.H., Kim, M.S., Rodrigue, H., Lee, J.Y., Shim, J.E., Kim, M., Chu, W.S. and Ahn, S.H., 2016, "Turtle mimetic soft robot with two swimming gait," Bioinspiration & Biomimetics, IOP Publishing, Vol.11, No. 3, 036010, May (SCI(E), IF 2.891, DOI: 10.1088/1748-3190/11/3/036010, ISSN: 1748-3182, JCR Impact Factor Rank 2/25(2015) in Robotics), Top 10% in Robotics.
[31] Jaehwan Kim, Chu, W.S. and Ahn, S.H., 2015, "Preface for the special issue of ISGMA 2014," International Journal of Precision Engineering and Manufacturing, June 2015, Volume 16, Issue 7, pp 1227 (SCI(E), IF 1.205, ISSN: 2234-7593).
[30] Lee, K.T., Kim, E.S., Chu, W.S. and Ahn, S.H., 2015, "Design and 3D printing of controllable-pitch Archimedean screw for pico-hydropower generation," Journal of Mechanical Science and Technology, Vol. 29, Issue 11, pp. 4851-4857, December (SCI(E), IF 0.838, JCR Impact Factor Ranking: 76/130 (2014) in ENGINEERING, Mechanical, DOI: 10.1007/s12206-015-1032-y, ISSN: 1976-3824).
[29] Chu, W.S., Chun, D.M., and Ahn, S.H., 2014, "Research Advancement of Green Technologies," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol.15, No. 6, pp. 973-977, June (SCIE, IF 1.585, DOI: 10.1007/s12541-014-0424-8, ISSN: 2234-7593, JCR Impact Factor Rank: 33/128 in Mechanical (2013)).
[28] Yoon, H.S., Lee, J.Y., Kim, H.S., Kim, M.S., Kim, E.S., Shin, Y.J., Chu, W.S., and Ahn, S.H., 2014, "A Comparison of Energy Consumption in Bulk Forming, Subtractive, and Additive Processes: Review and Case Study," International Journal of Precision Engineering and Manufacturing-Green Technology, IJPEM-GT, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 1, No. 3, pp. 261-279, July (SCI(E), IF: 2.545, DOI: 10.1007/s40684-014-0033-0, ISSN: 2288-6206, JCR Impact Factor Rank: 5/42 (2015) in ENGINEERING, MANUFACTURING), Springer Award: Most Cited Article.
[27] Wang, W., Lee, J.Y., Rodrigue, H., Song, S.H., Chu, W.S. and Ahn, S.H., 2014, "Locomotion of Inchworm-inspired Robot made of Smart Soft Composite (SSC)," Bioinspiration & Biomimetics, IOP Publishing, Vol. 9, 046006 (SCIE, IF 2.939, DOI:10.1088/1748-3182/9/4/046006, ISSN 1748-3182, JCR Impact Factor Rank 2/25(2015) in Robotics), Covered by Phys.org and TechXplore, November 10, 2014.
[26] Chu, W.S., Pandey, J.K., and Ahn, S.H., 2014, "Fabrication of Bio-composite Scaffold for Implantable Drug Delivery System (DDS)," Journal of Biobased Materials and Bioenergy - Special Issue, American Scientific Publishers, Vol. 8, No. 2, pp.230-239, April (SCIE, IF 0.826, jbmb.2014.1427, ISSN: 1556-6560, JCR Impact Factor Rank: 64/83 in Energy & Fuels (2013)), Cover Page.
[25] Chu, W.S., Kim, C.S., Lee, H.T., Choi, J.O., Park, J.I., Song, J.H., Jang, K.H., and Ahn, S.H., 2014, "Hybrid Manufacturing in Micro/Nano Scale: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 1, No. 1, pp. 75-92, January (SCIE, ISSN: 2234-7593), Springer Award: Most Cited Article.
[24] Ahn, S.H., Chun, D.M., and Chu, W.S., 2013, "Perspective to Green Manufacturing and Applications," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol.14, No. 6, pp. 873-874, June (SCIE, IF 1.585, DOI: 10.1007/s12541-013-0114-y, ISSN: 2234-7593, JCR Impact Factor Rank: 33/128 in Mechanical (2013)), IJPEM Most Cited Article Award, 2013 to 2014 (Nov. 20, 2015).
[23] Pandey, J.K., Kim, C.S., Chu, W.S., Choi, W.Y., Ahn, S.H., 2012, "Preparation and Structural Evaluation of Nano Reinforced Composites from Cellulose Whiskers of Grass and Biodegradable Polymer Matrix," Journal of Composite Material, SAGE Publication Ltd. (England) Vol. 46, No. 6, pp.653~663, March (SCI, IF 0.936, DOI: 10.1177/0021998312438174, ISSN: 0021-9983, JCR Impact Factor Rank: 9/24 in Composites (2013)).
[22] Chu, W.S., Lee, K.T., Song, S.H., Han, M.W., Lee, J.Y., Kim, H.S., Kim, M.S., Park, Y. J., Cho, K. J. and Ahn, S.H., 2012, "Review of Biomimetic Underwater Robots Using Smart Actuators," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 13, No. 7, pp. 1281-1292, July (SCI(E), IF 1.141, DOI: 10.1007/s12541-012-0171-7, ISSN: 2234-7593, JCR Impact Factor Rank: 33/128 in Mechanical (2013)), Citation by Google Scholar 82(Sep., 2015), IJPEM Most Cited Articles Award, 2012 to 2013, Google Scholar Citation: 115.
[21] Kim, M.S., Chu, W.S., Lee, J.H., Kim, Y.M. and Ahn, S.H., 2011, "Manufacturing of Inchworm Robot Using Shape Memory Alloy (SMA) Embedded Composite Structure," International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 3, pp. 565-568.
[20] Kang, H.J., Kim, H.J., Kim, J.S., Choi, W.Y., Chu, W.S., and Ahn, S.H.*, 2010, "Laser Marking System for Light Guide Panel using Design of Experiment and Web-based Prototyping," Robotics and Computer-Integrated Manufacturing, Pergamon-Elsevier Science Ltd. (England), Vol. 26, No. 5, pp. 535-540, October (SCI, IF 1.371, DOI: 10.1016/j.rcim.2010.04.003, ISSN:0736-5845, JCR Impact Factor Rank: 29/102 in Interdisciplinary Applcations (2013)).
[19] Cho, Kyu-Jin, Koh, Je-Sung, Kim, Sangwoo, Chu, W.S., Hong, Yongtaek, and Ahn, S.H.*, 2009, "Review of Manufacturing Processes for Soft Biomimetic Robots," International Journal of Precision Engineering and Manufacturing, Korean Society for Precision Engineering, in co-publication with Springer Verlag GmbH, Vol. 10, No. 3, pp. 171-181, July (SCIE, ISSN: 1229-8557, JCR Impact Factor Rank: 33/128 in Mechanical (2013)), IJPEM Most Cited Articles Award, 2009 to 2010, Citation by Google Scholar 46.
[18] Pandey, J.K., Chu, W.S., Kim, C.S., Lee, Caroline Sunyong, and Ahn, S.H.*, 2009, "Bio-nano Reinforcement of Environmentally Degradable Polymer Matrix by Cellulose Whiskers from Grass," Composite Part B:Engineering, Elsevier SCI Ltd. (England), Vol. 40, No. 7, pp. 676-680, October (SCI, IF 1.481, DOI: 10.1016/j.compositesb.2009.04.013, ISSN: 1359-8368, JCR Impact Factor Rank: 7/87 in Multidisciplinary (2013)) , Citation by Google Scholar 33.
[17] Kim, C.S., Park, Jinjoo, Chu, W.S., Ahn, S.H., Jang, Dong-Young., and Kim, Sung-Dong, 2009, "Fabrication of Silicon Micro-Mold for Polymer Replication using Focused Ion Beam," Microelectronic Engineering, Elsevier (Netherlands), Vol. 86, No. 4-6, pp. 556-560, June (SCI, I.F. 1.503, DOI:10.1016/j.mee.2008.12.081, ISSN:0167-9317, JCR Impact Factor Rank: 110/248 in Electrical & Electronic (2013)).
[16] Kim, M.S., Chu, W.S., Kim, Y.M., and Ahn, S.H.*, 2009, "Direct Metal Printing of 3D Electrical Circuit using Rapid Prototyping," International Journal of Precision Engineering and Manufacturing, Korean Society for Precision Engineering, in co-publication with Springer Verlag GmbH, Vol.10 No.5, pp.147-150, (SCIE, IF 1.207, DOI: 10.1007/s12541-009-0106-0, ISSN: 1229-8557, JCR Impact Factor Rank: 33/128 in Mechanical (2013)).
[15] Pandey, J.K., Chu, W.S., Kim, C.S., Lee, Caroline Sunyong, and Ahn, S.H.*, 2009, "Evaluation of Morphological Architecture of Cellulose Chains in Grass during Conversion from Macro to Nano Dimensions," e-polymers, European Polymer Federation (France), No. 102, pp. 1-15, August (SCIE, IF 0.661, ISSN: 1618-7229, JCR Impact Factor Rank: 76/82 in Polymer Science (2013)).
[14] Pandey, J.K., Chu, W.S., Kim, C.S., Lee, Caroline Sunyong, and Ahn, S.H.*, 2008, "Bionanocomposites of Grass," Advanced Materials Research, Trans Tech Publications, Vols. 47-50, pp. 435-438, June.
[13] Chu, W.S., Jeong, S.Y., Pandey, J.K., Ahn, S.H.*, Lee, Jae-Hoon, and Chi, Sang-Chul, 2008, "Fabrication of Composite Drug Delivery System using Nano Composite Deposition System and in vivo Characterization," International Journal of Precision Engineering and Manufacturing, Korean Society for Precision Engineering, in co-publication with Springer Verlag GmbH, Vol. 9, No. 2, pp. 81-83, April (SCIE, ISSN: 1229-8557, JCR Impact Factor Rank: 33/128 in Mechanical (2013)), IJPEM Most Cited Articles Award, 2008 to 2009.
[12] Pandey, J.K., Lee, J.W., Chu, W.S., Kim, C.S., Lee, Caroline Sunyong, and Ahn, S.H.*, 2008, "Cellulose Nanowhiskers from Grass of Korea," Macromolecular Research, The Polymer Society of Korea (Korea), Vol. 16, No. 5, pp. 396-398 (SCI, IF 1.787, ISSN: 1598-5032, JCR Impact Factor Rank: 37/82 in Polymer Science (2013)).
[11] Lee, Jae-Hoon, Ha, Won-Shik, Chu, W.S., Ahn, S.H., and Chi, Sang-Chul*, 2008, "Preparation of Micro-fabricated Biodegradable Polymeric Structure using NCDS," Archives of Pharmacal Research, Pharmaceutical Society of Korea (Korea), Vol. 31, No. 1, pp. 125-132, January (SCIE, IF 1.074, DOI: 10.1007/s12272-008-1130-9, ISSN: 0253-6269, JCR Impact Factor Rank: 164/256 in Pharmacology & Pharmacy (2013)).
[10] Chu, W.S., Jeong, S.Y., Kim, S.G., Ha, Won-Shik, Chi, Sang-Chul, and Ahn, S.H.*, 2008, "Fabrication of Biodegradable Drug Delivery System with Controlled Release Made of PLGA/5-FU/Hydroxyapatite," Rapid Prototyping Journal, Emerald Group Publishing Ltd. (England), Vol. 14, No. 5, pp. 293-299 (SCIE, IF 1.086, DOI:10.1108/13552540810907965, ISSN: 1355-2546, JCR Impact Factor Rank: 44/128 in Mechanical (2013)).
[9] Lee, J.C., Kang, H.J., Chu, W.S., and Ahn, S.H. (Submitted by S. I. Oh), 2007, "Repair of Damaged Mold Surface by Cold-Spray Method," CIRP Annals - Manufacturing Technology, Technische Rundschau Edition Colibri Ltd. (Switzerland), Vol. 56, No. 1, pp. 577-580, August (SCIE, IF 1.123, DOI: 10.1016/j.cirp.2007.05.138, ISSN: 0007-8506, JCR Impact Factor Rank: 3/43 in Industrial (2013)).
[8] Kim, S.G., Chu, W.S., Jung, W.K., and Ahn, S.H.*, 2007, "Evaluation of Mechanical and Electrical Properties of Nano Composite Parts Fabricated by Nano Composite Deposition System (NCDS)," Journal of Material Processing Technology, Elsevier Science SA (Switzerland), Vol. 187-188, pp. 331-334, June (SCIE, IF 1.143, doi:10.1016/j.jmatprotec.2006.11.209, ISSN: 0924-0136, JCR Impact Factor Rank: 6/39 in Manufacturing (2013)).
[7] Chu, W.S., Kim, S.G., Kim, H.J., Lee, Caroline Sunyong, and Ahn, S.H.*, 2007, "Fabrication of Bio-composite Drug Delivery Device Using Rapid Prototyping Technology," Key Engineering Materials, Trans Tech Publications, Vols. 342-343, pp. 497-500, January.
[6] Chu, W.S., Kim, S.G., Jung, W.K., Kim, H.J., Ahn, S.H.*, 2007, "Fabrication of Micro Parts using Nano Composite Deposition System," Rapid Prototyping Journal, Emerald Group Publishing Ltd. (England), Vol. 13, No. 5, pp. 276-283, June (SCIE, IF 1.086, DOI: 10.1108/13552540710824779, ISSN: 1355-2546, JCR Impact Factor Rank: 44/128 in Mechanical (2013)).
[5] Jung, W.K., Chu, W.S., Ahn, S.H.*, and Won, Myung-Shik, 2007, "Measurement and Compensation of Spring-back of Hybrid Composite Beam," Journal of Composite Materials, SAGE Publications Ltd. (England), Vol. 41, No. 7, pp. 851-864, March (SCI, IF 1.034, DOI: 10.1177/0021998306067064, ISSN: 0021-9983, JCR Impact Factor Rank: 9/24 in Composites (2013)).
[4] Kim, H.J., Chu, W.S., Ahn, S.H.*, Kim, Dong-Soo, and Jun, Cha-Soo, 2006, "Web-based Design and Manufacturing Systems for Micro Machining: Comparison of Architecture and Usability," Journal of Computer Applications in Engineering Education, John Wiley & Sons Inc. (USA), Vol. 14, No. 3, pp. 169-177, September (SCIE, IF 0.338, DOI:10.1002/cae.20076, ISSN: 1061-3773, JCR Impact Factor Rank: 70/87 in Multidisciplinary (2013)).
[3] Chu, W.S., Baek, Chang-Il, Ahn, S.H.*, and Cho, Tae-Hwan, 2006, "Rapid Prototyping of 3D Micro Rockets Using Mechanical Micro Machining," Journal of Mechanical Science and Technology, Korean Society of Mechanical Engineers (Korea), Vol. 20, No. 1, pp. 2405-2413, January (SCIE, IF 0.258, ISSN: 1738-494X, JCR Impact Factor Rank: 79/128 in Mechanical (2013)).
[2] Ahn, S.H.*, Kim, Dong-Soo, Chu, W.S., and Jun, Cha-Soo, 2005, "MIMS: Web-based Micro Machining Service," International Journal of Computer Integrated Manufacturing, Taylor & Francis Ltd. (England), Vol. 18, No. 4, pp. 251-259, June (SCIE, IF 0.722, DOI: 10.1080/09511920400030187, ISSN: 0951-192X, JCR Impact Factor Rank: 23/39 in Manufacturing (2013)).
[1] Chu, W.S. and Ahn, S.H.*, 2005, "Internet-based Composite Repair," Journal of Composite Materials, SAGE Publication Ltd. (England), Vol. 39, No. 9, pp. 827-845, May, (SCI, IF 1.034, DOI: 10.1177/0021998305048159, ISSN: 0021-9983, JCR Impact Factor Rank: 9/24 in Composites (2013)).
CATEGORY : DOMESTIC JOURNAL
[14] 김민식, 송성혁, 한민우, 추원식, 안성훈, 2017, "Fabrication of Miniature High Speed Actuator," 한국정밀공학회지, 한국정밀공학회, Vol. 34, No. 9. pp.597-602, 9월.
[13] 안성훈, 독고석, 추원식, 장수영, 이우성, 유영제, 윤제용, 2017, "적정기술의 역할과 비전," 적정기술학회지, Vol. 3, No. 1, pp. 6-10, 7월, Special Note.
[12] 김광민, 김형섭, 최다현, 이민지, 박윤찬, 추원식, 천두만, 이선영, 2016, "나노 입자 적층 시스템(NPDS)을 이용한 염료 감응 태양전지 - 전기 변색 통합 소자 및 에너지 하베스팅 시스템에 대한 연구," 마이크로전자 및 패키징학회지, 한국마이크로전자 및 패키징 학회, Vol. 23, No.2, pp. 65-71, 6월.
[11] 김민수, Binayak Bhandari, Bhandari, P., 퍼우델 시워 라즈, 이경태, 추원식, 김형일, Bhattachan, A., Mogasale, V., 이선영, 안성훈, 2015, "신재생 에너지를 사용한 네팔 고산지역의 백신 저온 유통 체계 구축," Journal of Appropriate Technology, Academic Society for Appropriate Technology (Korea), Vol. 1, No. 1, pp. 79-83, December, First issue.
[10] 장기환, 이현택, 김충수, 추원식, 안성훈, 2014, "나노스케일 3차원 프린팅 시스템을 위한 정렬 알고리즘," 한국정밀공학회, 한국정밀공학회지 Vol. 31, No. 12, pp.1101-1106, December.
[9] 한민우, 송성혁, 추원식, 이경태, 이재원, 안성훈, 2013, "직조 형태의 지능형 연성 복합재료를 이용한 쉘 구동기의 제작," 한국정밀공학회지, 한국정밀공학회, Vol. 30, No. 1, pp. 39-46, 1월, 특집.
[8] 추원식, 정석용, 박정빈, 안성훈, 이재훈, 지상철, 2008, "복합재 약물전달 시스템의 제작 및 체외 환경 특성 평가," 한국복합재료학회, Vol. 21, No. 3, pp. 18-23.
[7] 추원식, 김성근, 안성훈, 하원식, 지상철, 2006, "마이크로/나노 기술을 적용한 약물전달시스템," 한국정밀공학회지, Vol. 23, No. 12, pp. 21-29, 12월, 특집.
[6] 강혁진, 정우균, 추원식, 안성훈, 2006, "저온 분사 적층과 절삭가공을 이용한 금형 보수 사례연구," 한국정밀공학회지, Vol. 23, No. 7, pp. 101-107.
[5] 강혁진, 김형중, 추원식, 안성훈*, 2006, "실험계획법과 웹기반 시스템에 의한 도광판의 레이저 마킹," 한국정밀공학회지, Vol. 23, No. 4, pp. 91-98, 4월.
[4] 추원식, 안성훈, 김동수, 전차수, 2004, "MIMS: 웹기반 마이크로머시닝 서비스," 한국 CAD/CAM학회 논문집, Vol. 9, No. 3, pp. 238-244, 9월.
[3] 백창일, 추원식, 안성훈, 2003, "기계식 마이크로 가공을 이용한 마이크로 로켓의 개발," 한국항공우주학회지, Vol. 31, No. 9, pp.32-37, 11월.
[2] 안성훈, 이선영, 백창일, 추원식, 2002, "쾌속조형 재료의 강도예측 모델-Fused Deposition Modeling (FDM)," 한국복합재료학회지, Vol. 15, No. 6, pp. 38-43, 12월.
[1] 추원식, 안성훈, 2002, "인터넷 기반의 복합재 보수," 한국항공우주학회지, Vol. 28, No. 5, pp. 48-55, 8월.
CATEGORY : INTERNATIONAL CONFERENCE
[73] Quan, Y.J., Choi, I.G., Yu, J. H., Chu, W.S., Stephen M. Hsu and Ahn, S.H., 2017, "Microencapsulation of Phase Change Materials with Palmitic acid core and Polymethl Methacrylate (PMMA) shell for thermal energy storage system," The 7th Internatilnal Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN 2017), November 14 - 17, Seoul, Korea.
[72] Kim, J.S., Choi, I.G., Park,Samuel, Park, S.I., Ahn, S.H., Chun, D.M., Lee, C.S., and Chu, W.S., 2017, "Thermal treatment for enhanced performance of NPDS (nano particle deposition system) to fabricate large scale (1m x 1m) electrochromic windows," 43rd International Conference on Micro and Nanoengineering (MNE 2017), September 18-22, INL, Braga, Portugal.
[71] Park,Samuel, Mun, J.W., Kim, M.S., Yu, J. H., Kim, M.S., Li, T., Chu, W.S., and Ahn, S.H., 2017, "Vaccine Supply Management in Developing Countries: A Case Study in Tanzania with Vaccine Carrier," International Conference on Energy and Sustainability 2017 (ICES 2017), August 9-12, Nelson Mandela African Institution of Science and Technology Arusha, Tanzania., Best Poster Award.
[70] Chu, W.S., Park, S.I., Lee, J.Y., Kim, J.S., Choi, I.G., Park,Samuel, Kim, S.H., Chun, D.M., Lee, C.S., and Ahn, S.H., 2017, "Cost-Effective Process Development for Large Area Smart Window," International Conference on Energy and Sustainability, Aug 9 - 12, Nelson Mandela African Institution of Science and Technology Arusha, Tanzania.
[69] Kim, D.R., Iakovleva, A., Chu, W.S., and Ahn, S.H., 2017, "Product Development for Gendered Innovations in Engineering Education," Gender Summit 10 Asia-Pacific, May 25~26, Hitotsubashi Hall, Tokyo, Japan.
[68] Kim, J.S., Choi, I.G.,Park, S.I., Chun, D.M., Lee, C.S., Chu, W.S. and Ahn, S.H., 2017, "Effect of thermal treatment about NPDS (Nano Particle Deposition System) for electrochromic window," International Symposium on Green Manufacturing and Applications (ISGMA2017), Korean Society for Precision Engineers (KSPE), June 27(Tue) ~ July 1(Sat), 2017, Hwabaek International Convention Center, Gyeongju, Korea.
[67] Lee, J.Y., Choi, I.G., H. S. Kim, Lee, C.S., Ahn, S.H., Chu, W.S., 2017, "Durability evaluation of electrochromic window fabricated by Nano-particle Deposition System (NPDS)," International Symposium on Green Manufacturing and Applications, ISGMA 2017, June 27~July 1, Gyeongju, Korea, Best Poster Award.
[66] Quan, Y.J., Choi, I.G., Yu, J. H., Chu, W.S., Stephen M. Hsu, Ahn, S.H., 2017, "Preparation and Characterization of Polymethyl methacrylate (PMMA) Microencapsulated Phase Change Materials by Solvent Evaporation Method," International Symposium on Green Manufacturing and Application (ISGMA 2017), June 27 - July 01, Gyeongju, Korea.
[65] Park, S.I., Choi, I.G., Chun, D.M., Lee, C.S., Chu, W.S. and Ahn, S.H., 2017, "Effect of Plasma Assisted Deposition for Electrochromic Windows Fabrication Using Nano Particle Deposition System," International Symposium on Green Manufacturing and Applications (ISGMA2017), Korean Society for Precision Engineers (KSPE), June 27(Tue) ~ July 1(Sat), 2017, Hwabaek International Convention Center, Gyeongju, Korea.
[64] Kim, M., Kim, D.R., Kim, T.J.Y., Kim D. H., Chu, W.S. and Ahn, S.H., 2017, "Design of Vibration Assisted Polishing System for Silicon Carbide," International Symposium on Green Manufacturing and Applications (ISGMA 2017), Korean Society of Precision Engineering and etc., June 27~July 1, Hwabaek International Convention Center (HICO), Gyeongju, Korea..
[63] Kim D. H., Chu, W.S., Kim, T.J.Y., Lee, C.M., Ahn, S.H., 2017, "Design Methodology for Hybridization of Additive and Subtractive Processes," International Symposium on Green Manufacturing and Applications (ISGMA 2017), Korean Society of Precision Engineering and etc., June 27~July 1, Hwabaek International Convention Center (HICO), Gyeongju, Korea.
[62] Kim D. H., Woo, W.S., Chu, W.S., Ahn, S.H., Lee, C.M., 2017, "Development of Multi-Axis Laser-Assisted Milling Device," ASME 2017 International Manufacturing Science and Engineering Conference(MSEC2017), American Society of Mechanical Engineers (ASME), June 4~8, Los Angeles, CA, USA.
[61] Kim D. H., Kim, T.J.Y., Kim, M., Chu, W.S. and Ahn, S.H., 2017, "Hybrid Machine System in Manufacturing: State of the Art," Proceedings of the 7th International Conference on Manufacturing, Machine Design and Tribology, The Korean Society of Mechanical Engineers (KSME) and The Japan Society of Mechanical Engineers (JSME), April 19~22, Ramada Plaza Jeju Hotel, Jeju island, Korea.
[60] Lee, W. I., Ahn, S.H., Chu, W.S., 2016, "Improvement of Mechanical Engineering Curriculum Considering Gendered Innovation," US-Korea Conferece (UKC), Aug. 10-13.
[59] Lee, J.Y., Hyungsup Kim, Kim, S.H., Ahn, S.H., Lee, C.S., Chun, D.M., Chu, W.S., 2016, "Life-cycle test on electrochromic windows fabricated by Nano-Particle Deposition System (NPDS)," The 10th Asian-Australasian Conference on Composite Materials (ACCM-10), October 16-19, Bexco, Busan, Korea..
[58] Kim, N.G., Kim, M., Song, S.H., Chu, W.S., and Ahn, S.H., 2016, "3D Printed Strain Sensor Embedded Smart Soft Composite Actuator," International Symposium on Green Manufacturing and Applications (ISGMA) 2016, Korean Society of Precision Engineering and etc., June 21~25, Bali Nusa Dua Convention Center, Bali, Indonesia.
[57] Kim, S.H., Park, S.I., Lee, J.Y., Chu, W.S., and Ahn, S.H., 2016, "Laser Assisted Nano Particle Deposition for Electrochromic window," International Symposium on Green Manufacturing and Applications (ISGMA) 2016, Korean Society of Precision Engineering and etc., June 21~25, Bali Nusa Dua Convention Center, Bali, Indonesia.
[56] Lee, J.Y., Kim, S.H., Park, S.I., Chu, W.S., Ahn, S.H., 2016, "Cyclic testing of electrochromic windows fabricated by nano-particle deposition system (NPDS)," International Symposium on Green Manufacturing and Applications (ISGMA) 2016, Korean Society of Precision Engineering and etc., June 21~25, Bali Nusa Dua Convention Center, Bali, Indonesia..
[55] Li, T., Chu, W.S., Kim, M.S., Kim, H.I., Mun, J.W., 2016, "Portable Vaccine Carrier Designed for Mountainous Region: A Case Study in Napal," International Symposium on Green Manufacturing and Applications (ISGMA) 2016, Korean Society of Precision Engineering and etc., June 21~25, Bali Nusa Dua Convention Center, Bali, Indonesia.
[54] Kim, H.S., Kim, N.G., Chu, W.S., Ahn, S.H., 2016, "Design and Fabrication of Multi-actuator Soft Morphing Ray Robot," International Symposium on Green Manufacturing and Applications (ISGMA) 2016, Korean Society of Precision Engineering and etc., June 21~25, Bali Nusa Dua Convention Center, Bali, Indonesia., Best poster award.
[53] Park, S.I., Kim, S.H., Lee, J.Y., Chu, W.S. and Ahn, S.H., 2016, "Plasma Assisted Nano Particle Deposition for Electrochromic Devices," International Symposium on Green Manufacturing and Applications (ISGMA2016), Korean Society for Precision Engineers (KSPE), June 21-25, Bali Nusa Dua Convention Center, Bali, Indonesia.
[52] Lee, K.T., Chu, W.S., Bhandari, B., Bhandari, P., Bhattachan, A., Kim, S.M., Lee, K.I., Poudel, S.R., Kim, M.S., Kim, E.S., Kim, M., Lee, J.Y., Kim, H.I., Kang,H.E., Lee, J.G., Sung, Y.K., Cho, S.H., Fengpei, Y., Lee, C.S., Mogasale, V., Ahn, S.H., et al.,, 2015, "Construction of Renewable Energy System and Applying to Health Service in Mountainous Area of Nepal," International Symposium on Green Manufacturing and Application (ISGMA 2015), Korean Society of Precision Engineering(KSPE), June 23-27, Shangri-La Hotel, Qingdao, China.
[51] Kim, H.I., Han, M.W., Song, S.H., Wang, W., Chu, W.S. and Ahn, S.H., 2015, "Design and Manufacturing Process for Soft Robotic Hand Using Woven Type Smart Soft Composite (SSC)," International Symposium on Green Manufacturing and Application (ISGMA 2015), Korean Society of Precision Engineering(KSPE), June 23-27, Qingdao, China.
[50] Song, S.H., Kim, M.S., Kim, H.I., Chu, W.S., Ahn, S.H., 2015, "Manufacturing process of smart soft composite structure using 3D printing," International Symposium on Green Manufacturing and Application (ISGMA 2015), Korean Society of Precision Engineering(KSPE), June 23-27, Qingdao, China..
[49] Kim, M.S.,Kim, H.I.,Poudel, S.R.,Kim, M.,Bhandari, B.,Lee, K.T.,Chu, W.S., Anuj Bhattachan,Ahn, S.H., 2015, "Development of Backpack Type Vaccine Carrier - a Case Study in Nepal," International Symposium on Green Manufacturing and Application (ISGMA 2015), Korean Society of Precision Engineering(KSPE), June 23-27, Shangri-La Hotel, Qingdao, China..
[48] Han, M.W., Kim, H.I., Song, S.H., Chu, W.S., and Ahn, S.H., 2015, "Artificial Muscle for Biomimetic Hand using Smart Woven Fabric," International Symposium on Green Manufacturing and Application (ISGMA 2015), Korean Society of Precision Engineering(KSPE), June 23-27, Qingdao, China.
[47] Quan, Y.J., Wang, W., Rodrigue, H., Song, S.H., Chu, W.S. and Ahn, S.H., 2015, "SMA-based soft twisting-bending coupled actuator and its application to active catheter," International Symposium on Green Manufacturing and Application (ISGMA 2015), June 23-27, Qingdao, China.
[46] Park, S.I., Nakama, S., Song, J.H., Chu, W.S. and Ahn, S.H., 2015, "Direct Patterning of Electrochromic Display," International Symposium on Green Manufacturing and Application (ISGMA 2015), Korean Society of Precision Engineering(KSPE), June 23-27, Qingdao, China.
[45] Han, M.W., Rodrigue, H., Cho, S., Song, S.H., Chu, W.S., Choi, H. and Ahn, S.H., 2014, "Design and Performance Evaluation of Soft Morphing Car-spoiler," ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE), American Society of Mechanical Engineers (ASME), August 17-20, Buffalo, New York, USA.
[44] Lee, K.T., Kim, E.S., Chu, W.S., Ahn, S.H., 2014, "Life Cycle Assessment of 3D Printed Water Turbine Blade," International Symposium on Green Manufacturing and Applications (ISGMA 2014), Korean Society of Precision Engineering(KSPE), June 24-28, Busan, Korea.
[43] Kim, H.S., Chu, W.S., Lee, J.Y., Ahn, S.H., 2014, "Development of Biomimetic Undulatory Actuator using Smart Soft Composite," International Symposium on Green Manufacturing and Application (ISGMA 2014), June 24-28, Busan, Korea..
[42] Kim, E.S., Shin, Y.J., Chu, W.S., Ahn, S.H., 2014, "Effect of Moisture and Temperature on Mechanical Properties of Rapid Prototyping Parts - Fused Deposition Modeling (FDM)," International Symposium on Green Manufacturing and Applications (ISGMA 2014), Korean Society for Precision Engineering (KSPE), 24th~28th June, Busan Paradise hotel, Busan, Korea.
[41] Han, M.W., Rodrigue, H., Cho, S., Chu, W.S., Song, S.H., Choi, H. and Ahn, S.H., 2014, "Smart Soft Composite (SSC) based Morphing Car-spoiler for Improving Aerodynamic Characteristics," International Symposium on Green Manufacturing and Applications (ISGMA 2014), Korean Society of Precision Engineering(KSPE), June 24-28, Busan, Korea.
[40] Wang, W., Rodrigue, H., Shim, J.E., Song, S.H., Chu, W.S. and Ahn, S.H., 2014, "Twisting Actuator Based on Helical SMA Wires Made of Smart Soft Composite (SSC)," International Symposium on Green Manufacturing and Application (ISGMA 2014), Korean Society of Precision Engineering and etc., June 24-28, Busan, Korea.
[39] Chu, W.S., Kim, H.S., Song, S.H., Lee, J.Y., and Ahn, S.H., 2014, "Manufacturing of Underwater Robots using Smart Soft Composite (SSC)," The 7th MIRAI Conference on Microfabrication and Green Technology, Itabashi, Tokyo, Japan, March 27-28, Incentive Award.
[38] Pandey, J.K., Kim, C.S., Choi, J.O., Lee, H.T., Chu, W.S., Dong-Young Jang, Ahn, S.H., 2013, "Bio-inspired deposition of nano-particels on the glass surface for dye sensitized solar cell (DSSC)," International Symposium on Green Manufacturing and Application (ISGMA 2013).
[37] Chu, W.S., Kim, C.S., Lee, G.Y., and Ahn, S.H., 2013, "Hybrid Manufacturing Systems Based on 3D Printing Technology," Global 3D Tech Forum 2013, 3D Fusion Industry Association and Korea Electronics Association, Gangnam in Seoul, Korea, October 10-11.
[36] Lee, G.Y., Chu, W.S., Lee, K.T., Bhandari, B., Kim, M.S., Kim, H.S., Park, J.I., Bilegt, E., Lee, J.Y., Yoon, H.S., Park, G.H., Min, K.W., Kang, Y.S., Song, J.H., Song, C.K., Lee, C.S., Ahn, S.H. et al., 2013, "An Optimal Design and Performance Evaluation of Korean Traditional Ondol System in Varing Gorae Geometry Application of Goguryeo Style Jjok Gudeul," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[35] Chu, W.S., Kim, H.S., Lee, J.Y., and Ahn, S.H., 2013, "Biomimetic Underwater Robot Using Smart Soft Composite: a Ray-like Robot," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[34] Lee, K.T., Bhandari, B., Chu, W.S., Lee, G.Y., Yoon, H.S., Lee, J.Y., Bilegt, E., Park, J.I., Kim, M.S., Song, J.H., C. S. Lee, C. K. Song, Ahn, S.H., et al., 2013, "Installation of off-grid hybrid power generation system and smart grid in remote mountainous village of Nepal," International Symposium on Green Manufacturing and Applications (ISGMA 2013), Korean Society for Precision Engineering (KSPE), June 26-29, Honolulu, Hawaii, USA.
[33] Ahn, S.H., Chu, W.S., Song, S.H., Lee, J.Y., Kim, H.S., Kim, M.S. and Shim, J.E., 2013, "Underwater Robot based on Bio-inspired Swimming Motion using Smart Soft Composite (SSC) Actuator," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[32] Han, M.W., Chu, W.S., Rodrigue, H., Lee, J.Y., Song, S.H., Daniel Lee, Ahn, S.H. , 2013, "Morphing Car-Spoiler using Woven Type Smart Soft Composite (SSC) Actuator," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[31] Song, S.H., Lee, J.Y., Kim, M.S., Kim, H.S., Shim, J.E., Chu, W.S. and Ahn, S.H., 2013, "Smart Soft Composite (SSC) structure and its application: Turtle Robot," International Symposium on Nature-inspired Technology (ISNIT 2013), The Korean Society of Mechanical Engineers (KSME), January 6~9(8), High1 Resort, Ganwon-do, Korea.
[30] Han, M.W., Wu, R., Song, S.H., Chu, W.S., Lee, K.T., Daniel Lee, Ahn, S.H., 2012, "Development of Woven Type Smart Soft Composite (SSC) Structure," International Symposium on Green Manufacturing and Applications(ISGMA 2012), Korean Society of Precision Engineering, August, 27-29, Jeju Island, Korea.
[29] Song, S.H., Han, M.W., Lee, J.Y., Kim, H.J., Chu, W.S. and Ahn, S.H., 2012, "Biomimetic Turtle-like Swimming Robot," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Korean Society of Precision Engineering, August 27-29, Jeju, Korea, Best Poster Award.
[28] Lee, K.T., Bilegt, E., Chu, W.S., Lee, J.Y., Song, S.H., Han, M.W., Kim, H.S. and Ahn, S.H., 2012, "Locomotion of Eel-like Fish Robot Using Smart Soft Composite," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Korean Society of Precision Engineering, August, 27-29, Jeju Island, Korea.
[27] Chu, W.S., Kim, H.S., Lee, K.T., Song, S.H., Lee, J.Y., Park, N. J. and Ahn, S.H., 2012, "Development and motion of Bio-inspired Underwater Vehicle: a Ray Robot," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Korean Society of Precision Engineering, August, 27-29, Jeju Island, Korea .
[26] Chu, W.S., Jung, B.S. and Ahn, S.H., 2009, "Scaffold Fabrication for Drug Delivery System Using Layered Manufacturing Methods," The 20th International Solid Freeform Fabrication Symposium, August 3-5, Thompson Conference Center of The Univerisyt of Texas, TX, USA.
[25] Kim, C.S., Park, Jinjoo., Chu, W.S., Ahn, S.H., Jang, Dong-Young and Kim, Sung-Dong, 2008, "Fabrication of silicon micro-mold for polymer replication using focused ion beam," 34th International Conference on Micro and Nano Engineering 2008, 15-18 September 2008, Hilton, Athens, Greece.
[24] Pandey, J.K., Chu, W.S., Kim, C.S., Lee, Caroline Sunyong, and Ahn, S.H., 2008, "Bionanocomposites of Grass," International Conference on Multi-functional Materials and Structures, July 28-31, Hong, Kong, China.
[23] Kim, Y.M., Kim, M.S., Chu, W.S., and Ahn, S.H.*, 2008, "Manufacturing/ Experiment of GFRP with embedded Nitinol wires for repetitive actuations," SMST(Shape Memory and Superelastic Technologies),ASM international, Sep.21~25, Palazzo dei Congressi, Stresa, Italy.
[22] Kim, C.S., Chu, W.S., Kim. Jae-Hyun., Ahn, S.H., Jang. Dong-Young., and Lee. Hak-Joo, 2008, "Micro-milling tools fabricated by focused ion beam technology," Micro Manufacturing Conference & Exhibits, Society of Manufacturing Engineering, April 22-24, Framingham, Boston, USA.
[21] Pandey, J.K., Chu, W.S., Kim, C.S., Lee, Caroline Sunyong, and Ahn, S.H., 2007, "Influence of different modifications on the morphology of bionanocomposites from starch," International and INCCOM-6 Conference on Future Trends in Composite Materials and Processing, December 12-14, IIT Kanpur, INDIA.
[20] Kim, H.J., Chu, W.S., and Ahn, S.H.*, 2007, "Development of Material Modeler and Process Planner for the Fabrication of Functionally Graded Material using Nano Composite Deposition System," Asian Symposium for Precision Engineering and Nanotechnology 2007 (ASPEN 2007), Korean Society for Precision Engineering (KSPE), November 6-9, GIST, Gwangju, Korea.
[19] Lee, J.C., Kang, H.J., Chu, W.S., and Ahn, S.H., 2007, "Repair of Damaged Mold Surface by Cold-Spray Method," The 57th CIRP General Assembly, CIRP (The International Academy for Production Engineering), August 19-25, ICCD (International Congress Center Dresden), Dresden, Germany, Part I presentation.
[18] Pandey, J.K., Chu, W.S., Lee, Caroline Sunyong, and Ahn, S.H., 2007, "Preparation Characterization and Performance Evaluation of Nanocomposites from Natural Fiber Reinforced Biodegradable Polymer Matrix for Automotive Applications," International Symposium on Polymers and the Environment: Emerging Technology and Science, BioEnvironmental Polymer Society (BEPS), October 17-20, Vancouver, WA, USA.
[17] Jeong, S.Y., Chu, W.S., and Ahn, S.H., 2007, "Development of Hybrid Micro-fabrication System," The 1st MIRAI Joint Workshop on Micro Fabrication, June 28-29, Molecular Foundry, Lawrence Berkeley National Laboratory, CA, USA.
[16] Lee, J.C., Chu, W.S., Kang, H.J., Yeo, J.C., and Ahn, S.H., 2007, "Repair technique of damaged mold at low temperature by Cold-Spray Method," JSME-KSME Joint International Conference on Manufacturing, Machine Design, and Tribology 2007 (ICMDT 2007), Japan Society of Mechanical Engineers (JSME) - Korea Society of Mechanical Engineers (KSME), July 2-4, Hokkaido University Science hall, Sapporo, Japan, Best Paper Award.
[15] Chu, W.S., Kim, H.J., Kim, S.G., Ahn, S.H.*, Ha, Won-Shik, and Chi, Sang-Chul, 2007, "Fabrication of Biodegradable Drug Delivery System Using Nano Composite Deposition System," 16th International Conference On Composite Materials (ICCM-16), Japan Society for Composite Materials, July 8-13, Kyoto, Japan.
[14] Kim, H.J., Chu, W.S., Ahn, S.H.*, and Lee, Caroline Sunyong, 2007, "Fabrication of Functionally Graded Bio Materials by Nano Composite Deposition System," 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping (VRAP 2007), The International Academy for Production Engineering, September 24-29, Leiria, Portugal.
[13] Chu, W.S., Kim, H.J., Kim, S.G., and Ahn, S.H.*, 2007, "Nano Composite Deposition System (NCDS): Application to Biomedical Materials," Rapid 2007 Exposition & Conference, May 01-03, Marriott Detroit @ the Ren Cen, Detroit, MI, USA.
[12] Lee, H.S., Chu, W.S., Kang, Y.C., Kang, H.J., and Ahn, S.H., 2007, "Comparison of Fabrication Cost of Composite Bipolar Plate Made by Compression Molding and by Machining," The 14th International Conference on Computational & Experimental Engineering and Sciences (ICCES 07), January 3-8, Miami, USA.
[11] Chu, W.S., Kim, H.J., Kim, S.G., Lee, Caroline Sunyong, and Ahn, S.H.*, 2006, "Fabrication of Bio-composite Drug Delivery Device using Rapid Prototyping Technology," 7th Asian Symposium on Biomedical Materials, August 20-23, Jeju Island, Korea.
[10] Kim, S.G., Chu, W.S., Ahn, S.H., Ha, Won-Shik, and Chi, Sang-Chul, 2006, "Fabrication of Composite Scaffolds for Bio Applications: Drug Delivery System and Tissue Engineering," The Fifth Asian-Australasian Conference on Composite Materials (ACCM 2006), November 27-30, Hong Kong.
[9] Lee, H.S., Chu, W.S., Kang, Y.C., Kang, H.J., and Ahn, S.H., 2006, "Comparison of Fabrication Cost of Composite Bipolar Plate Made by Compression Molding and by Machining," The 5th Asian-Australasian Conference on Composite Materials (ACCM-5), November, 27-30, Kowloon, Hong-kong.
[8] Chu, W.S., Kim, S.G., Kim, H.J., and Ahn, S.H.*, 2006, "Fabrication of Nano-composite Parts Using Nano Composite Deposition System (NCDS)," Composite Durability Workshop 11, June 21-24, Seogwipo KAL Hotel Jeju Island, Korea.
[7] Kim, S.G., Chu, W.S., Kim, H.J., and Ahn, S.H.*, 2006, "Measurement of Mechanical Strength of Nano Composite Parts Fabricated by Nano Composite Deposition System (NCDS)," Multifunctional Nanocomposites International Conference, September 20-22, Honolulu, Hawaii.
[6] Kim, S.G.,Chu, W.S.,Jung, W.K.,Ahn, S.H., 2006, "Evaluation of mechanical and electrical properties of nano composite parts fabricated by nano composite deposition system (NCDS)," International Conference on Advanced Forming and Die Manufacturing Technology, 4-6 September 2006, Haeundae, Busan, Korea.
[5] Chu, W.S., Kim, S.G., Jung, W.K., Kim, H.J., Ahn, S.H.*, and Prinz, Friedrich B., 2005, "Fabrication of Nano-composite Parts Using Hybrid Rapid Prototyping System ," ASPEN 2005 International Conference on Precision Engineering and Micro/Nano Technology in Asia, November 12-14, Shenzhen, P.R. China.
[4] Kim, H.J., Chu, W.S., Kang, H.J., Kim, Dong-Soo, Jun, Cha-Soo, and Ahn, S.H.*, 2005, "Usability of Web-based Design and Manufacturing Systems: Case Study for Micro Machining," ASME 2005 International Design Engineering Technical Conference, September 24-28, Long Beach, LA, USA.
[3] Ahn, S.H., Chu, W.S., Jun, Cha-Soo, Kim, Dong-Soo, and Wright, Paul, 2004, "Internet-based CAM," World Congress on Computational Mechanics ( WCCM VI) , September 5-10, Beijing, China.
[2] Kim, Dong-Soo, Jun, Cha-Soo, Chu, W.S., Song, Chul-Ki, and Ahn, S.H., 2004, "Web-based Micro Machining," International Conference on Internet and Multimedia Systems and Applications (IMSA 2004), August 16-18, Kauai, USA.
[1] Kim, Dong-Soo, Jun, Cha-Soo, Chu, W.S., and Ahn, S.H., 2003, "MIMS: Web-nased Micro Machining Service," Korea-Japan Joint Symposium on Nanoengineering (NANO 2003), November 27-28, Daejeon, Korea.
CATEGORY : DOMESTIC CONFERENCE
[54] 김준영, 전영준, 이장엽, 추원식, 안성훈, 2017, "Improving Solar Cell Performance by Reducing the Operating Temperature Using Phase Change Materials," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 17일~19일, 라마다프라자제주호텔, 제주.
[53] 전영준, 최인규, 류종하, 추원식 and 안성훈, 2017, "Fabrication of Microencapsulated Phase Change Materials by using Solvent Evaporation Method," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월17일~19일, 라마다프라자제주호텔, 제주.
[52] 최인규, 이장엽, Kim, H. S., 천두만, 이선영 안성훈, 추원식, 2017, "전하량 균형을 통한 ECW의 투과도 개선," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월17일~19일, 라마다프라자제주호텔, 제주..
[51] 김지수, 최인규, 안성훈, 이선영, 천두만, 추원식, 2017, "나노분말적층시스템를 활용한 대면적 전기변색 창문 제작을 위한 공정 변수 최적화," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월17일~19일, 라마다프라자제주호텔, 제주..
[50] 김동현, 김준영, 김민철, 추원식, 이춘만, 안성훈, 2017, "적층 및 절삭 제조공정의 통합을 위한 방법론 연구," 한국정밀공학회 2017 춘계학술대회, 한국정밀공학회, 5월 17일~19일, 라마다프라자 제주호텔, 제주.
[49] 안성훈, 이현택, 왕웨이, 추원식, 이길용, 김형수, 송성혁, 이철림, 김민수, 2017, "3D/4D 프린팅을 이용한 자유형상 제작 (Fabrication of Freeform Parts Using 3D/4D Printing)," 제 27회 광기술 워크샵- KIST 강릉분원, 4월 21일.
[48] 김민철, 이장엽, 김동현, 김동률, 김준영, 추원식 and 안성훈, 2017, "기계 연마 가공 중 형상 예측 방법에 관한 연구," 한국생산제조시스템학회 춘계학술대회, 한국생산제조시스템학회, 4월26일~28일, 호텔인터불고엑스코, 대구.
[47] 박성익, 김세헌, 천두만, 이선영, 추원식 and 안성훈, 2016, "전기변색유리 제작을 위한 대면적 나노 파티클 적층 장비 개발," 한국정밀공학회 추계학술대회, 한국 정밀공학회, 10월 26~28일, 여수 디오션리조트, 여수, 최우수상.
[46] 안성훈, 추원식, 김민수, 오진우, 2016, "제조 패러다임 변화를 위한 하이브리드 제조 공정 이슈," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 11~13일, 제주 라마다프라자제주호텔, 제주..
[45] 김세헌, 박성익, 이장엽, 김형섭, 추원식, 이선영, 천두만, and 안성훈 , 2016, "나노 입자 적층 장치를 통해 적층된 CeO2 박막의 특성 연구 및 전기 변색 응용," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 11~13일, 라마다프라자제주호텔, 제주.
[44] 김세헌, 박성익, 이장엽, 추원식, 안성훈, 2015, "나노 입자 적층 시스템을 이용한 전기변색 소자의 CeO2 상대전극 제작," 한국정밀공학회 추계학술대회, 한국정밀공학회, 12월 16~18일, 하이원리조트 컨벤션호텔, 강원도 정선.
[43] 이장엽, 안성훈, 추원식, 김세헌, 박성익, 2015, "나노 입자 적층 시스템으로 제작한 전기변색 시편의 광 투과도 수명 평가," 한국정밀공학회 추계학술대회, 한국정밀공학회, 12월 16~18일, 하이원리조트 컨벤션호텔, 강원도 정선.
[42] 박성익, 김세헌, 이장엽, 추원식, 안성훈, 2015, "나노 입자 적층 시스템을 이용한 대면적 풀-셀 전기변색윈도우 제작에 관한 연구," 한국정밀공학회 추계학술대회, 한국정밀공학회, 12월 16~18일, 강원 하이원리조트 컨벤션호텔, 정선.
[41] 퍼우델 시워 라즈,Koirala,R.,김은섭,김형일,김민수,이강인,이경태,추원식 and 안성훈, 2015, " 3D 프린터를 이용한 미소수력 축류 터빈," 2015 한국신.재생에너지 춘계학술대회.
[40] 이경태, 안성훈, 추원식, Binayak Bhandari, Pratibha Bhandari, Anuj Bhattachan, 김수미, 이강인, 퍼우델 시워 라즈, 김민수, 김은섭, 김민철, 이장엽, 김형일, 강하은, 이재경, 성연국, 조성현, Yuan Fengpei, 표영준, 강수희, 손연호, 노유한, 송기현, 안희라, 이선영, Vittal Mogasale, 2015, "네팔 고산지역에서의 신재생 에너지 시스템 구축과 이를 활용한 의료 서비스," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 13~15일, 제주 라마다프라자제주호텔, 제주.
[39] 박성익, 이장엽, 김세헌,S. Nakama, 추원식 and 안성훈, 2015, "NPDS를 이용한 전기변색 윈도우의 제작 및 내구성에 관한 연구," 대한기계학회 춘계학술대회 마이크로/나노공학 부문, 대한기계학회, 5월 20~22일, BEXCO, 부산, 우수 포스터발표 논문상.
[38] 김형수, 추원식, 안성훈, 2015, "소프트 모핑 가오리 모사 로봇의 설계 및 제작," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 13~15일, 제주 라마다프라자제주호텔, 제주..
[37] 김형수, 추원식, 안성훈, 2015, "소프트모핑 생체 모사 가오리 로봇의 설계 및 제작," 한국생산제조시스템학회 2015년도 춘계학술대회, 4월28일~30일, 대전 ICC호텔.
[36] 김형일, 안성훈, 퍼우델 시워 라즈, 김민수, 이경태, 추원식, 2015, "개발도상국 산간지역 백신 수송에 적합한 백신캐리어 개발 및 평가," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 13~15일, 제주 라마다프라자제주호텔, 제주.
[35] 김형수, 추원식, 이장엽, 안성훈, 2015, "Design of Biomimetic Ray-like Robot Mimicking Swimming Modes of Batoid," 한국CAD/CAM학회 동계학술대회, 한국CAD/CAM학회, 2월 4~6일, 휘닉스파크, 평창..
[34] 송성혁,김민수, 김민철, 추원식, 안성훈, 2015, "3D 프린팅을 활용한 생체모사 구동기 제작 방법," 한국CAD/CAM학회 동계학술대회, 한국CAD/CAM학회, 2월 4~6일, 휘닉스파크, 평창.
[33] 송성혁, 김민수, 김민철, 추원식, 안성훈, 2014, "쾌속 조형 공정을 활용한 생체 모사 바다 거북 로봇 제작," 한국 CAD/CAM 학회 2014년 하계학술대회, 8/19(화)-21(목), 2014, Deogyusan Resort, Muju, Korea.
[32] 왕웨이, 로드리그 휴고, 한민우, 추원식, 안성훈, 2014, "Smart Phone Robot made of Smart Soft Composite," 한국복합재료학회 추계학술대회, 한국복합재료학회, 11월 20-21일, 서울과학기술대학교 100주년 기념관, 서울.
[31] 로드리그 휴고, 왕웨이, 한민우, 추원식 and 안성훈, 2014, "Development of Tube-Like Smart Soft Twisting Composite Actuator," 한국정밀공학회 2014 추계학술대회, 한국정밀공학회, 10월 29~31일, CECO(창원컨벤션센터), 창원.
[30] 이경태, 김은섭, 추원식, 안성훈, 2014, "마이크로 하이브리드 발전 시스템 설계 및 비용 분석," 한국 신·재생에너지학회 춘계학술대회, 한국 신·재생에너지학회, 5월 29~30일, 부산 해운대 그랜드호텔, 부산, 우수논문발표상.
[29] 추원식, 김충수, 이현택, 최정오, 박재일, 송지현, 장기환, 안성훈, 2014, "정밀가공을 위한 하이브리드 제조 공정의 리뷰," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 14~16일, 제주 라마다프라자제주호텔, 제주.
[28] 한민우, 송성혁, 로드리그 휴고, 추원식, 안성훈, 2014, "적층공정 기반 유리섬유강화 지능형 소프트 모핑 구동기," 한국군사과학기술학회 종합학술대회, 한국군사과학기술학회, 6월 19~20일, 제주 국제컨벤션센터, 제주.
[27] 송성혁, 김민수, 이장엽, 김민철, 추원식, 안성훈, 2014, "바다 거북 영법 연구를 위한 지능형 연성 복합재 구동기," 한국복합재료학회 춘계학술대회, 한국복합재료학회, 5월 29~30일, 경북대학교 해동학술정보실, 대구.
[26] 왕웨이, 로드리그 휴고, 추원식, 송성혁 and 안성훈, 2013, "SMA-Based Soft Morphing Actuators with Flexible and Rigid Segments: Application to Self-Folding Structures," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 30일~ 11월 1일, BEXCO, 부산.
[25] 한민우, 로드리그 휴고, 조승현, 추원식, 송성혁, 최해천, 안성훈, 2013, "주행 하향력 발생을 위한 자동차 모핑 스포일러의 공기 역학적 특성," 한국정밀공학회, 추계학술대회, 한국정밀공학회, 10월 31일~11월 1일, BEXCO, 부산.
[24] 김형수, 추원식, 이장엽, 김민수, 안성훈, 2013, "A Study of Energy Efficient Locomotion of Biomimetic Ray-like Robot," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 31일~11월 1일, 부산 BEXCO.
[23] 안성훈, 김충수, 송성혁, 윤해성, 최정오, 추원식, 2012, "3D 프린팅의 응용-다종재료의 상온 나노 프린팅과 스마트 소프트 복합재 로봇의 예," 한국정밀공학회 설계 및 재료부문 동계강습회.
[22] 송성혁, 이장엽, 김민수, 심재율, 김형수, 추원식, 안성훈, 2012, "지능형 연성 복합재 구조체를 이용한 거북 로봇의 설계," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원, 광주.
[21] 추원식, 안성훈, 2012, "나노복합재 적층장치의 개발 및 그 응용 (Development of Nano Composite Deposition System (NCDS) and its applications)," 한국기계가공학회 2012년 춘계학술대회, 6월 28일-29일, 한국폴리텍 I 대학교(정수켐퍼스), 서울.
[20] 이경태, 추원식, 송성혁, 한민우, 김형수, 이장엽, 김민수, 안성훈, 2012, "스마트 연성 복합재를 이용한 수중 로봇의 개발," 한국정밀공학회 2012년도 춘계학술대회, 한국정밀공학회, 5월 31일~ 6월 1일, 라마다프라자제주호텔, 제주.
[19] 송성혁, 추원식, 김형중, 안성훈, 2012, "지능형 연성 복합재 구동기를 이용한 생체모방 거북이 로봇," 2012년 한국복합재료학회 춘계학술대회, 한국복합재료학회, 5월 11일, 홍익대학교 세종캠퍼스.
[18] 정범석, 추원식, 김형중, 김민생, 안성훈*, 2009, "나노복합재적층장치를 이용한 의료용 고분자 지지체 제작 및 동물 실험," 2009년 한국CAD/CAM학회 학술발표회, 한국CAD/CAM학회, 2월 4~6일, 한화리조트 휘닉스파크, 평창.
[17] 김충수, 추원식, 김재현, 안성훈, 장동영, 이학주, 2008, "집속이온빔을 이용한 마이크로 엔드밀의 제작 및 가공," 대한기계학회 마이크로/나노공학 부문 춘계학술대회, 대한기계학회, 5월 30일, 서울대학교 내 정밀기계설계 공동연구소 .
[16] 신유인, 여준철, 추원식, 안찬영, 송철기, 안성훈, 2008, "난삭재 INCONEL718에 대한 최적절삭조건의 실험적 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 11~13일, 제주컨벤션센터, 제주.
[15] 김충수, 추원식, 안성훈, 장동영,지텐드라, 정범석, 자파르, 2008, "집속이온빔 (FIB)로 가공된 10마이크로미터 급의 마이크로 밀링툴의 제작 ," 한국 정밀공학회 춘계학술대회, 한국 정밀공학회, 6월 11-13일, 제주 컨벤션 센터, 제주도.
[14] 추원식, 김형중, 김성근, 안성훈*, 지상철, 2007, "복합재 약물전달 시스템의 약물 방출속도 제어," 한국복합재료학회 춘계학술대회, 한국복합재료학회, 4월 21일, 연세대학교, 우수논문상.
[13] 김형중, 추원식, 안성훈*, 2007, "나노복합재 적층장치(NCDS)를 위한 하이브리드 공정계획 개발," 2007년 한국CAD/CAM학회 학술발표회, 한국CAD/CAM학회, 1월 31일~2월 2일, 보광휘닉스파크 컨벤션센터, 강원도 평창.
[12] 이희섭, 추원식, 강윤철, 강혁진, 안성훈, 2006, "PEM 연료전지용 복합재 분리판의 제작비용 비교: 압축성형과 기계식 가공," 한국신재생에너지학회 추계학술대회, 한국신재생에너지학회, 11월 23-24, 김대중컨벤션센터, 광주.
[11] 김성근, 추원식, 김형중, 안성훈*, 하원식, 지상철, 2006, "약물전달시스템을 위한 약물/고분자 복합체 제작," 한국복합재료학회 추계학술대회, 한국복합재료학회, 11월 23일, 금오공과대학교, 구미.
[10] 김형중, 김성근, 추원식, 안성훈*, 2006, "나노복합재 적층장치를 위한 하이브리드 공정계획," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 18~20일, 라마다프라자호텔, 제주.
[9] 추원식, 김성근, 김형중, 안성훈*, 2006, "나노복합재 적층장치를 이용한 약물전달체 제작," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 18~20일, 라마다프라자호텔, 제주.
[8] 추원식, 김성근, 김형중, 안성훈*, 2006, "Fabrication of Bio Composite Parts Using Nano Composite Deposition System," 서울공대 바이오 공학연구소 개소식 및 기념 심포지움, 7월 25일, 서울대학교 엔지니어하우스, 서울.
[7] 김성근, 정우균, 추원식, 김형중, 안성훈*, 2005, "하이브리드 쾌속 조형 시스템의 개발 및 나노 복합재 부품 제작," 한국정밀공학회, 추계학술대회, 10월, 광주(김대중컨벤션센터).
[6] 추원식, 김성근, 안성훈, 2005, "하이브리드 쾌속 조형을 이용한 기능성 마이크로 부품 제작," 한국정밀공학회, 춘계학술대회, 6월, 제주도(라마다프라자).
[5] 김형중, 추원식, 안성훈*, 2005, "웹기반 마이크로 머시닝의 사용성 평가," 한국 CAD/CAM학회 학술발표회, 2월, 평창, 강원도.
[4] 안성훈, 전차수, 김동수, 추원식, 2004, "웹기반 마이크로머시닝 서비스," 한국 CAD/CAM학회 학술발표회, 한국 CAD/CAM학회, 2월, 평창.
[3] 백창일, 추원식, 정우벽, 전우, 김치완, 성미정, 강지영, 안성훈, 2003, "광학부품의 웹기반 신속제작 시스템," 한국정밀공학회 학술대회, 한국정밀공학회, 6월 12-13, 제주.
[2] 추원식, 안성훈, 2002, "항공기용 복합재의 보수모델 - 랩 보수," 한국항공우주학회 학술발표회, 한국항공우주학회, 4월 12-13일, 무주, pp. 416-421.
[1] 추원식, 안성훈, 2002, "인터넷을 사용한 항공기용 복합재의 보수," 한국항공우주학회 추계학술대회, 한국항공우주학회, 11월 8-9일, 평창.
CATEGORY : THESIS
[2] Chu, W.S., 2009, "Implantable Drug Delivery System Using Layered Manufacturing Methods," Ph. D. Thesis, Seoul National University.
[1] Chu, W.S., 2004, "웹기반 설계 및 생산 시스템 구축," 석사학위 논문, 경상대학교 (공동지도교수).
CATEGORY : TECHNICAL REPORT
[3] 이우일, Ahn, S.H., 조규진, 김도년 and Chu, W.S., 2016, "젠더혁신을 도입한 기계공학 분야의 전공교과 개선 및 개발 연구(Improvement of Mechanical Engineering Curriculum Considering Gendered Innovation)," 한국여성과학기술인지원센터, 정책연구용역과제 최종보고서, 9월 30일.
[2] Ahn, S.H., 주종남, 이춘만, 차석원, 조규진, 고승환, 정해도, 정성호, 조영태, 천두만, Chu, W.S., Kim D. H., Kim, M., Kim, T.J.Y., Lee, K.I., Quan, Y.J., 2016, "하이브리드 제조 기술관련 최신 기술동향 등 발전 전략보고서," 차세대 하이브리드 제조 컨소시엄, (주)현대위아 연구과제 최종보고서, 12월.
[1] 주종남,이춘만,Ahn, S.H.,Chu, W.S.,Kim, M.S.,Oh, J.W., 2016, "HYBRID MANUFACTURING Newsletter," 서울대/한국정밀공학회_차세대 하이브리드 제조 컨소시엄, Vol. 1, No. 1..
CATEGORY : INVITED PRESENTATION
[17] Ahn, S.H., Lee, H.T., Wang, W., Chu, W.S., Lee, G.Y., Kim, H.S., Song, S.H., Li, T., Kim, M.S., 2017, "3D/4D 프린팅을 이용한 자유형상 제작(Fabrication of Freeform Parts Using 3D/4D Printing)," 제 27회 광기술 워크샵- KIST 강릉분원, 4월 21일.
[16] Ahn, S.H., Chu, W.S., Han, M.W., Lee, H.T., Wang, W., Kim, H.S., Song, S.H., Kim, H.I., 2016, "새로운 로봇을 만나다," SK HCI-UX Robot Forum, 서울대학교 예술복합연구동 오디토리엄, 서울, 11월 9일.
[15] Ahn, S.H., Kim, M.S., Oh, J.W., Chu, W.S., 2016, "하이브리드 공작기계," 하이브리드 컨소시엄 기술 세미나, (주)성우, 창원, 7월 22일.
[14] Ahn, S.H., Kim, M.S., Oh, J.W., Chu, W.S., 2016, "하이브리드 공작기계," 하이브리드 컨소시엄 기술 세미나, 아이엔테코(주), 창원, 7월 22일.
[13] Ahn, S.H., Song, S.H., Chu, W.S., Lee, H.T., 2016, "Hybrid Manufacturing of Smart Materials," 11th International Conference on Micromanufacturing (ICOMM 2016), UC Irvine, CA, USA, March 30, Keynote speach.
[12] Chu, W.S., Kim, C.S., Lee, H.T., Choi, J.O., Park, J.I., Song, J.H., Jang, K.H., and Ahn, S.H., 2015, "하이브리드 제조 공정: 마이크로/나노스케일," 경남생산기계산업 기술고도화사업-경남나노광학산업 기업지원사업 중간보고회 및 통합 기술교류회, 창원, 4월 16일, 기술세미나(생산기계).
[11] Chu, W.S., 2015, "3차원 프린팅," 혁신적 공학 종합설계1, 서울대학교 (4월 24일), 특강.
[10] Ahn, S.H. and Chu, W.S., 2015, "3차원 프린팅(3D Printing)," 제 1회 기술선도형 명품치과의료기기 공동개발을 위한 산학연병 R&BD 세미나,10/21.
[9] Chu, W.S., 2012, "Rapid Prototyping and its Applications," 윤활및파괴특론, 자동차선박기술대학원, 울산대학교, 울산, (10월 31일), 특강(English).
[8] Ahn, S.H., Kim, C.S., Song, S.H., Yoon, H.S., Choi, J.O., and Chu, W.S., 2012, "3D 프린팅의 응용-다종재료의 상온 나노 프린팅과 스마트 소프트 복합재 로봇의 예," 한국정밀공학회 2012년 설계 및 재료 부문 동계강습회, 부여호텔, 2월 2일.
[7] Ahn, S.H., Chu, W.S., and Song, S.H., 2012, "3D 프린터의 원리와 전망," 지식경제부 전략기획사업단, Jan. 9.
[6] Ahn, S.H., Chu, W.S., Jung, B.S., Kim, M.H., and Chun, D.M., 2009, "Introduction to biomedical research in IDIM," University of Edinburgh (Prof. McGeough Group), July 27.
[5] Ahn, S.H., Pandey, J.K., Yan, J., Lee, J.C., Lee, C.W., Kang, D.W., and Chu, W.S., 2009, "Fabrication and Characterization of Green Nano Composites," U.C. Berkeley, USA (Prof. Dornfeld Group), August 5.
[4] Chu, W.S., Jeong, S.Y., Park, J.B., Ahn, S.H., Ha, Won-Shik, and Chi, Sang-Chul, 2008, "Implantable Drug Delivery System by Nano Composite Deposition System," BK21, Joint Workshop Seoul National University - The University of Tokyo, January 15, Tokyo, Japan.
[3] Ahn, S.H., Chu, W.S., Pandey, J.K., and Jeong, S.Y., 2007, "바이오 복합재의 제작 및 응용," 메카트로닉스 클러스터 사업단, 창원대학교 12/18.
[2] Ahn, S.H., Chu, W.S., Pandey, J.K., Jung, W.K., Lee, J.W., Choi, W.Y., and Jeong, S.Y., 2007, "나노 복합재의 제작과 응용," 부품소재특론 세미나, BK21 신소재부품소재사업단, 한양대학교, 안산, 11/22.
[1] Ahn, S.H., Chu, W.S., Jeong, S.Y., and Pandey, J.K., 2007, "Development of Hybrid Micro-fabrication System and Application to Drug Delivery System," Stanford University, RPL, July 20, 2007.
CATEGORY : PATENT
[14] 천두만, 박하니, 이선영, 안성훈, 추원식, 2017, "광촉매 박막제작장치 및 광촉매 박막제작방법 (Photocatalytic thin film manufacturing apparatus and method)," 출원번호: 10-2017-0097768, 출원일: 2017.08.01.
[13] 이선영, 안성훈, 추원식, 천두만, 김형섭, 최다현, 김광민, 2016, "전기 변색층과 이온 저장층을 포함하는 전기 변색 소자 및 그 제조 방법," 출원번호: PCT/10-2016-0069170, 출원일: 2016.03.06.
[12] 천두만, 박하니, 최준호, 안성훈, 추원식, 이선영, 2016, "건식 입자 분사 노즐," 출원번호: 10-2016-0110754, 출원일: 2016.08.30, 등록번호: 10-1781074, 등록일: 2017.09.18.
[11] 천두만, 나심 모하마드 누르, 이선영, 안성훈, 추원식, 2016, "그래핀 플레이크 박막 제작장치 ," 출원번호: 10-2016-0107824, 출원일: 2016.08.24.
[10] 이선영, 최다현, 이민지, 김형섭, 김광민, 천두만, 추원식, 2016, "투명전극 및 그 제조방법과 이를 이용한 전기변색소자," 출원번호: 10-2016-0026586, 출원일: 2016.03.04, 등록번호: 10-174420, 등록일: 2017.05.31.
[9] 이선영, 안성훈, 추원식, 천두만, 김형섭, 최다현, 김광민, 2016, "전기 변색층과 이온저장층을 포함하는 전기 변색 소자 및 그 제조 방법," 출원번호: 10-2016-0069170, 출원일: 2016.06.03.
[8] 추원식, 안성훈, 박성익, 김세헌, 2016, "상온 플라즈마 하이브리드 분말 적층 방식을 이용한 스마트윈도우 제작 장치 및 방법," 출원번호: 10-2016-0014375, 출원일: 2016.02.04.
[7] 안성훈, 송성혁, 김민수, 로드리그 휴고, 추원식, 김형수, 왕웨이 , 2014, "복합재 작동기," 출원번호: 10-2014-0099261, 출원일: 2014.08.01, 등록번호: 10-1648260, 등록일: 2016.08.08.
[6] 안성훈, 추원식, 김민생, 이재훈, 김윤미, 2012, "자벌레 로봇 (Inchworm Robot)," 출원번호: 10-2009-0037908, 출원일: 2009.04.30, 10-1106849, 2012.1.10. 등록.
[5] 안성훈, 추원식, 김민생, 김윤미, 이길용, 이재훈, 2010, "자벌레 로봇 (Inchworm Robot)," 국제출원번호 : PCT/KR2010/000825, 출원일 : 2010.02.10.
[4] 추원식, 이재철, 김형중, 천두만, 홍영선, 김충수, 이길용, 여준철, 안성훈, 2008, "체내삽입형 약물방출장치 및 이를 이용한 약물방출 제어시스템 (Implantable Drug Release Apparatus and Drug Delivery Control System using the Same)," 출원번호: 10-2008-0057191, 출원일: 2008.06.18, 10-1512514, 2015.04.09 등록.
[3] 추원식, 김성근, 안성훈, 하원식, 지상철, 2008, "약물-고분자 복합재 적층 시스템을 이용한 약물전달체의 제조방법 (Preparation of Drug Delivery System using drug-polymer composite deposition system)," 출원번호: 10-2007-0017011, 출원일: 2007.02.20, 10-0847395, 2008.07.14 등록.
[2] 지텐드라, 추원식, 김충수, 안성훈, 2007, "한국 잔디로부터 추출된 마이크로 / 나노크기의 결정을 가지는 섬유강화 복합재용 셀룰로오스 섬유 (Micro/Nano Crystalline Cellulose Fiber from Grass of Korea for Fiber-reinforced Composite materials)," 출원번호: 10-2007-0112407, 출원일: 2007.11.06.
[1] 안성훈, 정우균,추원식, 강혁진, 2007, "초음속 분사적층 기술을 이용한 금형 보수 및 제작 (Repair and Manufacturing of Mold using Cold Spray Technique)," 출원번호: 10-2005-0048072, 출원일: yyyy.mm.dd, 10-0683124, 2007.02.08 등록.
CATEGORY : EXHIBITION
[10] Ahn, S.H., Chu, W.S., Han, M.W., Wang, W., Kim, H.S., Kim, D.R., Kim, M.S., Park, H.B., Song, S.H., Kim, H.I., 2017, "Smart Soft Composite : Application to Soft Robots and Actuators," JEC asia 2017, JEC GROUP, November 1-3, Coex, Seoul, KOREA.
[9] Lee, C.S., Chu, W.S., Park, S.I., Lee, J.Y., Kim, J.S., Kim H.S., Choi D.H., Choi, I.G., Park,Samuel, Lee M.J., Kim G.Y., 2017, "스마트윈도우 사업단," 제39회 국제환경산업기술&그린에너지전 (ENVEX), 환경부 법정법인 환경보전협회, 6월 7일~9일, COEX, 서울.
[8] Ahn, S.H., Chu, W.S., Lee, J.Y., Kim, M.S., Kim, J.S., Mun, J.W., Kim, M.S., Park, H.B., 2016, "Indroduction of Innovative Design and Integrated Manufacturing Lab. and Global Solar Volunteer Corps," ASAT-GSDV International Joint Symposium, Nov. 30 - Dec. 2, SNU, Seoul.
[7] Ahn, S.H., Chu, W.S., Lee, J.Y., Kim, M.S., Kim, J.S., Mun, J.W., Kim, M.S., Park, H.B., 2016, "Impact of Renewable Energy on Development of Alpine Villages in Nepal:Case Study of Photovoltaic-Small Hydro-Wind," Academic Society for Appropriate Technology (ASAT) - Green Smart Development and Vision (GSDV) International Joint Symposium 2016.
[6] Ahn, S.H., Chu, W.S., Kim D. H., Kim, M., Park, S.I., Quan, Y.J., Lee, K.I., Min, S.H., Kim, T.J.Y., Park, H.B., 2016, "서울대/정밀공학회 차세대 하이브리드 제조 컨소시엄," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 26일~28일, 여수 디오션리조트, 여수.
[5] Ahn, S.H., Chu, W.S., Kim D. H., Kim, M., Park, S.I., Wang, W., Min, S.H., 2016, "Innovative Design and Integrated Manufacturing Lab. at Seoul National Univeristy," International Conference of Manufacturing Technology Engineers 2016(ICMTE 2016), 한국생산제조학회, 10월 6일, 리츠칼튼호텔, 서울.
[4] Ahn, S.H., Chu, W.S., Kim, M., Kim, H.S., Kim, M.S., Jang, K.H., 2015, "서울대/정밀공학회 차세대 하이브리드 제조 컨소시엄," 한국정밀공학회 추계학술대회, 한국정밀공학회, 12월 16~18일, 하이원리조트 컨벤션호텔, 정선.
[3] Kim, H.J., Chu, W.S., Lee, J.C., Chun, D.M., Ahn, S.H., 2008, "2008 산학협력 EXPO 대학 공개 기술 투자박람회," 교육과학기술부, 지식경제부, 1월 6~8일, KINTEX.
[2] Ahn, S.H., Kim, H.J., Chu, W.S., Kang, H.J., Kim, S.H., Chun, D.M., 2005, "Web-based Design and Manufacturing Tools," ASME Computers and Information in Engineering Conference (CIE) 25th Anniversary/ASME 125th Anniversary Showcase, September 27, Long Beach, CA, USA.
[1] Chu, W.S., 백창일, 정우벽, 김치완, 전우, 2003, "인터넷기반 광학부품 설계 시스템," 대학보유기술전시회, 2003, 4월 24-26일, COEX, 서울.
CATEGORY : ARTICLE
[5] 안성훈, 추원식, 오진우, 2016, "하이브리드 제조 - 하이브리드 제조의 개요," 기계저널, Vol. 56, No.7, pp.32-35.
[4] 추원식, 2009, "내일을 향해 쏴라 - 생각을 표현하는 도구 '공학'," 과학동아, 12월호.
[3] 추원식, 안성훈, 2008, "바이오 프린팅(Bio Printing) 기술의 소개," 한국CAD/CAM학회, 14권, 1호, pp.5-11.
[2] 김민생, 추원식, 김형중, 안성훈, 2008, "의학 쾌속조형 (MRP, Medical Rapid Prototyping)," 한국CAD/CAM학회지, 14권, 3호, pp. 7-15.
[1] 추원식, 안성훈, 2006, "Bio RP를 위한 이미징 소프트웨어," 한국CAD/CAM학회지, 12권, 1호, pp. 6-8.
CATEGORY : HONORS/AWARDS
[19] Lee, J.Y., Choi, I.G., H. S. Kim, Lee, C.S., Ahn, S.H., Chu, W.S., 2017, "Durability evaluation of electrochromic window fabricated by Nano-particle Deposition System (NPDS)," International Symposium on Green Manufacturing and Applications, ISGMA 2017, June 27~July 1, Gyeongju, Korea, Best poster Award.
[18] Park, S.I., Kim, S.H., Chun, D.M., Lee, C.S., Chu, W.S. and Ahn, S.H., 2016, "전기변색유리 제작을 위한 대면적 나노 파티클 적층 장비 개발," 한국정밀공학회 추계학술대회, 한국 정밀공학회, 10월 26~28일, 여수 디오션리조트, 여수, 최우수상.
[17] Chu, W.S., Kim, C.S., Lee, H.T., Choi, J.O., Park, J.I., Song, J.H., Jang, K.H. and Ahn, S.H., 2016, "Most Cited Article Award, 2014 to 2015 - Hybrid Manufacturing in Micro/Nano Scale: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 1, pp. 75-92, 2014.
[16] Yoon, H.S., Lee, J.Y., Kim, H.S., Kim, M.S., Kim, E.S., Shin, Y.J., Chu, W.S., and Ahn, S.H., 2016, "Most Cited Article Award, 2014 to 2015 - A Comparison of Energy Consumption in Bulk Forming, Subtractive, and Additive Processes: Review and Case Study," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 3, pp. 261-279, 2014, Korean Society of Precision Engineering, Springer, October 14.
[15] Kim, H.S., Kim, N.G., Chu, W.S., Ahn, S.H., 2016, "Design and Fabrication of Multi-actuator Soft Morphing Ray Robot," International Symposium on Green Manufacturing and Applications (ISGMA) 2016, Korean Society of Precision Engineering and etc., June 21~25, Bali Nusa Dua Convention Center, Bali, Indonesia., Best poster award.
[14] Park, S.I., Chu, W.S., Lee, J.Y., Lee, K.I., Kim, S.H., 2016, "전기변색유리 (SmarT ViEW)," 2016 SMART 창업경진대회, 1월 29일, 서울대학교, 주최: 대학산업기술지원단-서울대학교 글로벌사회공헌단-산학협동재단, 한국산업기술진흥원장상.
[13] Chu, W.S., 2015, "Certificate of Reviewer Contribution," International Journal of Precision Engineering and Manufacturing-Green Technology, KSPE, Springer, (12/31).
[12] Chu, W.S., 2015, "Certificate of Reviewer Contribution," International Journal of Precision Engineering and Manufacturing, KSPE, Springer, (12/31).
[11] Chu, W.S., 2015, "Young Researcher Award," International Symposium on Green Manufacturing and Application (ISGMA) 2015 (6/25).
[10] Park, S.I., Lee, J.Y., Kim, S.H.,S. Nakama, Chu, W.S. and Ahn, S.H., 2015, "NPDS를 이용한 전기변색 윈도우의 제작 및 내구성에 관한 연구," 대한기계학회 춘계학술대회 마이크로/나노공학 부문, 대한기계학회, 5월 20~22일, BEXCO, 부산, 우수 포스터발표 논문상.
[9] Chu, W.S., 2014, "IJPEM Contribution Award," International Journal of Precision Engineering and Manufacturing, Korean Society for Precision Engineering (10/30).
[8] Chu, W.S., Kim, H.S., Song, S.H., Lee, J.Y., and Ahn, S.H., 2014, "Manufacturing of Underwater Robots using Smart Soft Composite (SSC)," The 7th MIRAI Conference on Microfabrication and Green Technology, Itabashi, Tokyo, Japan, March 27-28, Incentive Award.
[7] Lee, G.Y., Lee, K.T., Bhandari, B., Chu, W.S., Yoon, H.S., Lee, J.Y., Bilegt, E., Park, J.I., Kim, M.S., Kim, H.S., 민경욱, 강영석, 박지훈, Song, J.H., 유은지, 김민희, 장문혁, 김범호, Maskey, A., 김형섭, 조단이, 최다현, 김동휘, 박철환, 박찬동, 한현석, 심재환, 한성길, 박지환, 조원희, 문준영, 송세용, 신현민, Bhandari, P., Ahn, S.H., Lee, C.S., 송철기, 2013, "국토교통부장관상(대상), Nepal Solar Volunteer Corps," 제5회 소외된 90%를 위한 창의설계 경진대회, 한양대학교, 한밭대학교, 한동대학교, (사)나눔과기술, 5월 24일, 한양대학교, Award from Minister of Land, Infrastructure and Transport, Korea.
[6] Song, S.H., Han, M.W., Lee, J.Y., Kim, H.J., Chu, W.S. and Ahn, S.H., 2012, "Biomimetic Turtle-like Underwater Robot," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Korean Society of Precision Engineering, August 27-29, Jeju, Korea, Best Poster Award.
[5] Kyu-Jin Cho, Je-Sung Koh, Sangwoo Kim, Chu, W.S., Yongtaek Hong, Ahn, S.H., 2011, "International Journal of Precision Engineering and Manufacturing Most Cited Articles Award, 2009 to 2010,," Kyu-Jin Cho, Je-Sung Koh, Sangwoo Kim, Won-Shik Chu, Yongtaek Hong, Sung-Hoon Ahn, “Review of manufacturing processes for soft biomimetic robots,” IJPEM, Vol. 10, No. 3, pp. 171-181, 2009..
[4] Chu, W.S., Jeong, S.Y., Pandey, J.K., Ahn, S.H.*, Lee, Jae-Hoon, and Chi, Sang-Chul, 2010, "International Journal of Precision Engineering and Manufacturing Most Cited Articles Award, 2008 to 2009," Springer, Netherland, May 18, 2010 (IJPEM Vol.9, No. 2, pp. 81-83, 2008).
[3] Lee, J.C., Chu, W.S., Kang, H.J., Yeo, J.C., Ahn, S.H., 2007, "Best Paper Award - Repair technique of damaged mold at low temperature by Cold-Spray Method," JSME-KSME Joint International Conference on Manufacturing, Machine Design, and Tribology 2007 (ICMDT 2007), Japan Society of Mechanical Engineers (JSME) - Korea Society of Mechanical Engineers (KSME), July 2-4, Hokkaido University Science hall, Sapporo, Japan.
[2] Chu, W.S., Kim, H.J., Kim, S.G., Ahn, S.H., 지상철, 2007, "우수논문상 - 복합재 약물전달 시스템의 약물 방출속도 제어," 한국복합재료학회 춘계학술대회, 한국복합재료학회, 4월 21일, 연세대학교.
[1] Lee, K.T., Kim, E.S., Chu, W.S., Chu, W.S., , "마이크로 하이브리드 발전 시스템 설계 및 비용 분석," 한국 신·재생에너지학회 춘계학술대회, 한국 신·재생에너지학회, 5월 29~30일, 부산 해운대 그랜드호텔, 부산, 우수논문발표상.
CATEGORY : BOOKS/CHAPTERS
[1] Pandey, J.K., Lee, J.W., Chu, W.S., Mohanty, Amar Kumar, Misra, Manuju, and Ahn, S.H., 2008, "Polymer Nanocomposits for Packaging Application - Nanocomposites of Polyolefins for Packaging Applications, Chapter 4," American Scientific Publishers Valencia, California 91381-0751, USA.