IDIM Member Publications
Hyuk-Jin Kang


CATEGORY : INTERNATIONAL JOURNAL
[6] Kang, H.J., Kim, H.J., Kim, J.S., Choi, W.Y., Chu, W.S., and Ahn, S.H.*, 2010, "Laser Marking System for Light Guide Panel using Design of Experiment and Web-based Prototyping," Robotics and Computer-Integrated Manufacturing, Pergamon-Elsevier Science Ltd. (England), Vol. 26, No. 5, pp. 535-540, October (SCI, IF 1.371, DOI: 10.1016/j.rcim.2010.04.003, ISSN:0736-5845, JCR Impact Factor Rank: 29/102 in Interdisciplinary Applcations (2013)).
[5] Lee, J.C., Kang, H.J., Chu, W.S., and Ahn, S.H. (Submitted by S. I. Oh), 2007, "Repair of Damaged Mold Surface by Cold-Spray Method," CIRP Annals - Manufacturing Technology, Technische Rundschau Edition Colibri Ltd. (Switzerland), Vol. 56, No. 1, pp. 577-580, August (SCIE, IF 1.123, DOI: 10.1016/j.cirp.2007.05.138, ISSN: 0007-8506, JCR Impact Factor Rank: 3/43 in Industrial (2013)).
[4] Kang, H.J., and Ahn, S.H.*, 2007, "Fabrication and Characterization of Micro parts by Mechanical Micro Machining: Precison and Cost Estimation," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Professional Engineering Publishing, Vol. 221, No. 2, pp.231-240, February (SCI).
[3] Kang, H.J., Ahn, S.H.*, Lee, Jae-Sang, and Lee, Jae-Hyung, 2006, "Surface Modification of Aluminum by Nitrogen-Ion Implantation," International Journal of Precision Engineering and Manufacturing, Vol. 7. No. 1, pp. 57-61, January (SCIE).
[2] Kang, H.J. and Ahn, S.H., 2005, "Surface Modification of Aluminum for Mold by Nitrogen Ion Implantation," Transactions of the North American Manufacturing Research Institution of SME, Vol. 33, pp. 305-317 (NAMRC, New York, USA, May 24-27).
[1] Kim, Gyung-Dong, Kang, H.J., Ahn, S.H.*, Song,Chul Ki, Baek, Chang Il, and Lee, Caroline Sunyong, 2005, "Laser-marking Process for Liquid Crystal Display Light Guide Panel," Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers Part B, Short Communications in Manufacture and Design, Vol. 219, No. 7, pp. 265-270, July (SCI).
CATEGORY : DOMESTIC JOURNAL
[4] 강혁진,최운용,안성훈, 2007, "기계식 마이크로 머시닝을 이용한 마이크로 형상의 특성과 비용 평가," 한국정밀공학회지, Vol. 24, No. 1, pp. 47-56, 1월.
[3] 강혁진, 정우균, 추원식, 안성훈, 2006, "저온 분사 적층과 절삭가공을 이용한 금형 보수 사례연구," 한국정밀공학회지, Vol. 23, No. 7, pp. 101-107.
[2] 강혁진, 김형중, 추원식, 안성훈*, 2006, "실험계획법과 웹기반 시스템에 의한 도광판의 레이저 마킹," 한국정밀공학회지, Vol. 23, No. 4, pp. 91-98, 4월.
[1] 강혁진, 안성훈, 2005, "질소이온주입에 의한 알루미늄의 표면개질특성," 한국정밀공학회지, Vol. 22, No. 12., pp.124-130, 5월.
CATEGORY : INTERNATIONAL CONFERENCE
[6] Lee, J.C., Kang, H.J., Chu, W.S., and Ahn, S.H., 2007, "Repair of Damaged Mold Surface by Cold-Spray Method," The 57th CIRP General Assembly, CIRP (The International Academy for Production Engineering), August 19-25, ICCD (International Congress Center Dresden), Dresden, Germany, Part I presentation.
[5] Lee, J.C., Chu, W.S., Kang, H.J., Yeo, J.C., and Ahn, S.H., 2007, "Repair technique of damaged mold at low temperature by Cold-Spray Method," JSME-KSME Joint International Conference on Manufacturing, Machine Design, and Tribology 2007 (ICMDT 2007), Japan Society of Mechanical Engineers (JSME) - Korea Society of Mechanical Engineers (KSME), July 2-4, Hokkaido University Science hall, Sapporo, Japan, Best Paper Award.
[4] Lee, H.S., Chu, W.S., Kang, Y.C., Kang, H.J., and Ahn, S.H., 2007, "Comparison of Fabrication Cost of Composite Bipolar Plate Made by Compression Molding and by Machining," The 14th International Conference on Computational & Experimental Engineering and Sciences (ICCES 07), January 3-8, Miami, USA.
[3] Lee, H.S., Chu, W.S., Kang, Y.C., Kang, H.J., and Ahn, S.H., 2006, "Comparison of Fabrication Cost of Composite Bipolar Plate Made by Compression Molding and by Machining," The 5th Asian-Australasian Conference on Composite Materials (ACCM-5), November, 27-30, Kowloon, Hong-kong.
[2] Kim, H.J. , Kang, H.J. , Ahn, S.H.* , Kim, Dong-Soo, and Jun, Cha-Soo, 2006, "Internet-based Micro Machining System and Estimation of Manufacturing Cost," 2006 International Symposium on Flexible Automation, July 10-12, Osaka, Japan.
[1] Kim, H.J., Chu, W.S., Kang, H.J., Kim, Dong-Soo, Jun, Cha-Soo, and Ahn, S.H.*, 2005, "Usability of Web-based Design and Manufacturing Systems: Case Study for Micro Machining," ASME 2005 International Design Engineering Technical Conference, September 24-28, Long Beach, LA, USA.
CATEGORY : DOMESTIC CONFERENCE
[5] 이희섭, 추원식, 강윤철, 강혁진, 안성훈, 2006, "PEM 연료전지용 복합재 분리판의 제작비용 비교: 압축성형과 기계식 가공," 한국신재생에너지학회 추계학술대회, 한국신재생에너지학회, 11월 23-24, 김대중컨벤션센터, 광주.
[4] 김형중, 강혁진, 안성훈*, 김동수, 전차수, 2006, "인터넷 기반 마이크로 가공 시스템과 가공 비용 예측," 2006년도 한국CAD/CAM학회 학술발표회, 보광휘닉스파크 컨벤션센터, 2월 9일~11일.
[3] 강혁진, 김휘준, 안성훈, 2005, "실험계획법을 이용한 도광판의 레이저 가공 및 웹기반 시스템 구축," 2005년도 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 23~24일, 라마다프라자제주호텔, 제주도.
[2] 강혁진, 안성훈, 이재상, 김경균, 2005, "질소이온주입에 의한 알루미늄의 표면개질특성," 대한기계학회 춘계학술대회, 5월, 부산 BEXCO.
[1] 강혁진, 안성훈, 2004, "질소이온주입 알루미늄의 표면개질특성," 한국정밀공학회 추계학술대회, 10월 21-22, 부산.
CATEGORY : THESIS
[1] Kang, H.J., 2006, "Fabrication and Characterization of Micro parts by Mechanical Micro Machining," 석사학위 논문, 서울대학교.
CATEGORY : TECHNICAL REPORT
[1] Ahn, S.H., and Kang, H.J., 2005, "웹기반 마이크로 머시닝 시스템," 신임교수 지원과제 연구보고서.
CATEGORY : PATENT
[1] 안성훈, 정우균,추원식, 강혁진, 2007, "초음속 분사적층 기술을 이용한 금형 보수 및 제작 (Repair and Manufacturing of Mold using Cold Spray Technique)," 출원번호: 10-2005-0048072, 출원일: yyyy.mm.dd, 10-0683124, 2007.02.08 등록.
CATEGORY : EXHIBITION
[1] Ahn, S.H., Kim, H.J., Chu, W.S., Kang, H.J., Kim, S.H., Chun, D.M., 2005, "Web-based Design and Manufacturing Tools," ASME Computers and Information in Engineering Conference (CIE) 25th Anniversary/ASME 125th Anniversary Showcase, September 27, Long Beach, CA, USA.
CATEGORY : HONORS/AWARDS
[1] Lee, J.C., Chu, W.S., Kang, H.J., Yeo, J.C., Ahn, S.H., 2007, "Best Paper Award - Repair technique of damaged mold at low temperature by Cold-Spray Method," JSME-KSME Joint International Conference on Manufacturing, Machine Design, and Tribology 2007 (ICMDT 2007), Japan Society of Mechanical Engineers (JSME) - Korea Society of Mechanical Engineers (KSME), July 2-4, Hokkaido University Science hall, Sapporo, Japan.