IDIM Member Publications
Sung-Geun Kim


CATEGORY : INTERNATIONAL JOURNAL
[8] Chu, W.S., Jeong, S.Y., Kim, S.G., Ha, Won-Shik, Chi, Sang-Chul, and Ahn, S.H.*, 2008, "Fabrication of Biodegradable Drug Delivery System with Controlled Release Made of PLGA/5-FU/Hydroxyapatite," Rapid Prototyping Journal, Emerald Group Publishing Ltd. (England), Vol. 14, No. 5, pp. 293-299 (SCIE, IF 1.086, DOI:10.1108/13552540810907965, ISSN: 1355-2546, JCR Impact Factor Rank: 44/128 in Mechanical (2013)).
[7] Kim, S.G., Chu, W.S., Jung, W.K., and Ahn, S.H.*, 2007, "Evaluation of Mechanical and Electrical Properties of Nano Composite Parts Fabricated by Nano Composite Deposition System (NCDS)," Journal of Material Processing Technology, Elsevier Science SA (Switzerland), Vol. 187-188, pp. 331-334, June (SCIE, IF 1.143, doi:10.1016/j.jmatprotec.2006.11.209, ISSN: 0924-0136, JCR Impact Factor Rank: 6/39 in Manufacturing (2013)).
[6] Lee, Caroline Sunyong, Kim, S.G., Kim, H.J., and Ahn, S.H.*, 2007, "Measurement of Anisotropic Compressive Strength of Rapid Prototyping Parts ," Journal of Materials Processing Technology, Elsevier Science SA (Switzerland), Vol. 187-188, pp. 627-630, June (SCIE, IF 1.143, DOI:10.1016/j.jmatprotec.2006.11.095, ISSN: 0924-0136), Citation by Google Scholar 60.
[5] Chu, W.S., Kim, S.G., Kim, H.J., Lee, Caroline Sunyong, and Ahn, S.H.*, 2007, "Fabrication of Bio-composite Drug Delivery Device Using Rapid Prototyping Technology," Key Engineering Materials, Trans Tech Publications, Vols. 342-343, pp. 497-500, January.
[4] Lee, H.S., Kim, H.J., Kim, S.G. and Ahn, S.H.*, 2007, "Evaluation of Graphite Composite Bipolar Plate for PEM(PROTON EXCHANGE MEMBRANE) Fuel Cell: Electrical, Mechanical, and Molding Properties," Journal of Materials Processing Technology, Elsevier Science SA (Switzerland), Vol. 187-188, pp. 425-428, June (SCIE, IF 1.143, DOI:10.1016/j.jmatprotec.2006.11.213, ISSN: 0924-0136), Citation by Google Scholar 35.
[3] Lee, Caroline Sunyong, Kim, S.G., Ahn, S.H.*, Lutgard C. DeJonghe and Gareth Thomas, 2007, "Three Dimensional Analysis of Thermal Stress and Prediction of Failure of Polytypoidally Joined SI3N4-AL2O3 Functionally Graded Material (FGM)," Materials Transactions, The Japan Institute of Metals, Vol. 48, No. 9, pp. 2489-2493, August (SCI).
[2] Lee, Caroline Sunyong, Kim, S.G., Jeong, S.Y., Ahn, S.H.*, Jin, Won-Hyeog, Jang, Sung-Soo, Cho, Il-Joo, Kim, Young-Sik, and Nam, Hyo-Jin, 2007, "Thermal Analysis of Micro Cantilevers Integrated with Heaters for Low Power Nano-Data Storage Application," Sensors and Actuators A, Elsevier Science SA (Switzerland), Vol. 139, No.1-2, pp.12-16, September (SCI, IF 1.434, DOI: 10.1016/j.sna.2006.10.034, ISSN 0924-4247).
[1] Chu, W.S., Kim, S.G., Jung, W.K., Kim, H.J., Ahn, S.H.*, 2007, "Fabrication of Micro Parts using Nano Composite Deposition System," Rapid Prototyping Journal, Emerald Group Publishing Ltd. (England), Vol. 13, No. 5, pp. 276-283, June (SCIE, IF 1.086, DOI: 10.1108/13552540710824779, ISSN: 1355-2546, JCR Impact Factor Rank: 44/128 in Mechanical (2013)).
CATEGORY : DOMESTIC JOURNAL
[2] 추원식, 김성근, 안성훈, 하원식, 지상철, 2006, "마이크로/나노 기술을 적용한 약물전달시스템," 한국정밀공학회지, Vol. 23, No. 12, pp. 21-29, 12월, 특집.
[1] 김성근, 김형중, 강윤철, 이희섭, 안성훈*, 2006, "나노 적층 시스템으로 제작된 나노 복합재의 기계적 물성평가," 레이저기술, Vol. 147, No. 4, pp. 63-67.
CATEGORY : INTERNATIONAL CONFERENCE
[14] Chu, W.S., Kim, H.J., Kim, S.G., Ahn, S.H.*, Ha, Won-Shik, and Chi, Sang-Chul, 2007, "Fabrication of Biodegradable Drug Delivery System Using Nano Composite Deposition System," 16th International Conference On Composite Materials (ICCM-16), Japan Society for Composite Materials, July 8-13, Kyoto, Japan.
[13] Chu, W.S., Kim, H.J., Kim, S.G., and Ahn, S.H.*, 2007, "Nano Composite Deposition System (NCDS): Application to Biomedical Materials," Rapid 2007 Exposition & Conference, May 01-03, Marriott Detroit @ the Ren Cen, Detroit, MI, USA.
[12] Chu, W.S., Kim, H.J., Kim, S.G., Lee, Caroline Sunyong, and Ahn, S.H.*, 2006, "Fabrication of Bio-composite Drug Delivery Device using Rapid Prototyping Technology," 7th Asian Symposium on Biomedical Materials, August 20-23, Jeju Island, Korea.
[11] Kim, S.G., Chu, W.S., Ahn, S.H., Ha, Won-Shik, and Chi, Sang-Chul, 2006, "Fabrication of Composite Scaffolds for Bio Applications: Drug Delivery System and Tissue Engineering," The Fifth Asian-Australasian Conference on Composite Materials (ACCM 2006), November 27-30, Hong Kong.
[10] Jeong, S.Y., Kim, S.G., Ahn, S.H., Jin, Won-Hyeog, Jang, Sung-Soo, Cho, Il-Joo, Kim, Young-Sik, and Nam Hyo-Jin, 2006, "Thermal Analysis of NDSS made of Silicon Nitride Cantilever," International Probe Storage Workshop IV (IPSW 4), The Society of Information Storage and Systems (SISS), October 12-13, Yonsei University, Seoul, Korea.
[9] Ahn, S.H., Kim, S.G., Jeong, S.Y., Lee, Caroline Sunyong, Jin, Won-Hyeog, Jang, Sung-Soo, Cho, Il-Joo, Kim, Young-Sik, and Nam, Hyo-Jin, 2006, "Applications of Probe-based Nano Technology: AFM and Data Storage," COLLOQUIUM ON Micro/Nano Thermal Engineering 2006, Advanced Automotive Research Center, Seoul National Univeristy, Micro Thermal System Research Center, August 2-3, Seoul, Korea.
[8] Chu, W.S., Kim, S.G., Kim, H.J., and Ahn, S.H.*, 2006, "Fabrication of Nano-composite Parts Using Nano Composite Deposition System (NCDS)," Composite Durability Workshop 11, June 21-24, Seogwipo KAL Hotel Jeju Island, Korea.
[7] Lee, Caroline Sunyong, Kim, S.G., Jeong, S.Y., Ahn, S.H., Jin. Won-Hyeog, Cho, Il-Joo, Kim, Young-Sik, and Nam, Hyo-Jin, 2006, "Thermal Analysis of Micro Cantilevers Integrated with Heaters for Low Power Nano-data Storage Application ," Asia-Pacific Conference of Transducers and Micro-Nano Technology (APCOT), IEEE, June 25-28, Marina Mandarin Hotel, Singapore, Singapore..
[6] Kim, S.G., Chu, W.S., Kim, H.J., and Ahn, S.H.*, 2006, "Measurement of Mechanical Strength of Nano Composite Parts Fabricated by Nano Composite Deposition System (NCDS)," Multifunctional Nanocomposites International Conference, September 20-22, Honolulu, Hawaii.
[5] Lee, H.S., Kim, H.J., Kim, S.G., and Ahn, S.H.*, 2006, "EVALUATION OF GRAPHITE COMPOSITE BIPOLAR PLATE FOR PEM FUEL CELL," The 3rd International Conference on Advanced Forming and Die Manufacturing Technology, 4-6 September 2006, Haeundae, Busan, Korea.
[4] C.S.Lee, Kim, S.G., Kim, H.J., and Ahn, S.H.*, 2006, "Measurement of Anisotropic Compressive Strength of Rapid Prototyping Parts," International Conference on Advanced Forming and Die Manufacturing Technology, 4-6 September 2006, Haeundae, Busan, Korea.
[3] Kim, S.G.,Chu, W.S.,Jung, W.K.,Ahn, S.H., 2006, "Evaluation of mechanical and electrical properties of nano composite parts fabricated by nano composite deposition system (NCDS)," International Conference on Advanced Forming and Die Manufacturing Technology, 4-6 September 2006, Haeundae, Busan, Korea.
[2] Chu, W.S., Kim, S.G., Jung, W.K., Kim, H.J., Ahn, S.H.*, and Prinz, Friedrich B., 2005, "Fabrication of Nano-composite Parts Using Hybrid Rapid Prototyping System ," ASPEN 2005 International Conference on Precision Engineering and Micro/Nano Technology in Asia, November 12-14, Shenzhen, P.R. China.
[1] Jung, W.K., Kim, S.G. and Ahn, S.H., 2005, "Electromagnetic Shielding of Nano Composite parts Fabricated by Hybrid Rapid Prototyping System," Korea-Japan Joint Symposium on Nanoengineering (NANO 2005), October 26-28, Daejeon, Korea.
CATEGORY : DOMESTIC CONFERENCE
[11] 추원식, 김형중, 김성근, 안성훈*, 지상철, 2007, "복합재 약물전달 시스템의 약물 방출속도 제어," 한국복합재료학회 춘계학술대회, 한국복합재료학회, 4월 21일, 연세대학교, 우수논문상.
[10] 김성근, 추원식, 김형중, 안성훈*, 하원식, 지상철, 2006, "약물전달시스템을 위한 약물/고분자 복합체 제작," 한국복합재료학회 추계학술대회, 한국복합재료학회, 11월 23일, 금오공과대학교, 구미.
[9] 김형중, 김성근, 추원식, 안성훈*, 2006, "나노복합재 적층장치를 위한 하이브리드 공정계획," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 18~20일, 라마다프라자호텔, 제주.
[8] 추원식, 김성근, 김형중, 안성훈*, 2006, "나노복합재 적층장치를 이용한 약물전달체 제작," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 18~20일, 라마다프라자호텔, 제주.
[7] 추원식, 김성근, 김형중, 안성훈*, 2006, "Fabrication of Bio Composite Parts Using Nano Composite Deposition System," 서울공대 바이오 공학연구소 개소식 및 기념 심포지움, 7월 25일, 서울대학교 엔지니어하우스, 서울.
[6] 이희섭, 김성근, 김형중, 안성훈*, 2006, "PEM 연료전지 분리판용 흑연입자 복합재의 성형성 평가," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 18-19일, 경주 교육문화회관, 경주 .
[5] 김성근, 김형중, 강윤철, 이희섭, 안성훈*, 2006, "나노 적층 시스템으로 제작된 나노 복합재의 기계적 물성평가," 2006 한국 CAD/CAM 학회 학술발표회, 보광휘닉스파크 컨벤션센터, 2월 9일~11일.
[4] 이희섭, 김성근, 안성훈, 전의식, 안상열, 안병기, 2005, "PEM 연료전지용 섬유강화 분리판의 특성 평가," 한국신재생에너지학회 추계학술대회, 한국신재생에너지학회, 11월 11일, 서울대, 서울.
[3] 이희섭, 김성근, 안성훈, 전의식, 안상열, 안병기, 2005, "고분자전해질 연료전지 분리판용 복합재의 전기적 / 기계적 특성," 대한 기계학회 추계학술대회, 11월 2일~4일, 용평.
[2] 김성근, 정우균, 추원식, 김형중, 안성훈*, 2005, "하이브리드 쾌속 조형 시스템의 개발 및 나노 복합재 부품 제작," 한국정밀공학회, 추계학술대회, 10월, 광주(김대중컨벤션센터).
[1] 추원식, 김성근, 안성훈, 2005, "하이브리드 쾌속 조형을 이용한 기능성 마이크로 부품 제작," 한국정밀공학회, 춘계학술대회, 6월, 제주도(라마다프라자).
CATEGORY : THESIS
[1] Kim, S.G., 2007, "Fabrication of Nano Composite Parts Using Nano Composite Deposition System," Master thesis, Seoul National University.
CATEGORY : TECHNICAL REPORT
[1] 이영근, 이도전, 유민상, 최동희, 서창민, 박종찬, Kang, Y.C., Kim, S.G., Ahn, S.H. , 2006, "나노 복합재 적층 시스템을 활용한 인공인체형상 제작," 2006 과학고 교육과정 내실화 지원사업 R&E 결과보고서.
CATEGORY : PATENT
[1] 추원식, 김성근, 안성훈, 하원식, 지상철, 2008, "약물-고분자 복합재 적층 시스템을 이용한 약물전달체의 제조방법 (Preparation of Drug Delivery System using drug-polymer composite deposition system)," 출원번호: 10-2007-0017011, 출원일: 2007.02.20, 10-0847395, 2008.07.14 등록.
CATEGORY : HONORS/AWARDS
[1] Chu, W.S., Kim, H.J., Kim, S.G., Ahn, S.H., 지상철, 2007, "우수논문상 - 복합재 약물전달 시스템의 약물 방출속도 제어," 한국복합재료학회 춘계학술대회, 한국복합재료학회, 4월 21일, 연세대학교.