IDIM Member Publications
Doo-Man Chun


CATEGORY : INTERNATIONAL JOURNAL
[32] Kim, H., Park, Y., Chu, W.S., Ahn, S.H., Chun, D.M. and Lee, C.S., Submitted, "Kinetic spraying of silver nanowire blended graphite powder to fabricate transparent conductive electrode and their application in electrochromic device," Surface & Coatings Technology (SCIE, ISSN: 0257-8972, IF 2.589).
[31] Choi, D., Lee, M., Kim, H., Chu, W.S., Chun, D.M., Ahn, S.H. and Lee, C.S., 2018, "Investigation of Dry-deposited Ion Storage Layers using Various Oxide Particles to Enhance Electrochromic Performance," Solar Energy Materials and Solar Cells, Elsevier B.V., Vol. 174, pp. 599-606 (SCI, ISSN: 0927-0248, IF 4.784), January..
[30] Kim, H., Choi, D., Kim, K., Chu, W.S., Chun, D.M. and Lee, C.S., 2017, "Effect of particle size and amorphous phase on the electrochromic properties of kinetically deposited WO3 films," Solar Energy Materials and Solar Cells, Article in press (SCI, ISSN: 0927-0248, IF 4.784).
[29] Chu, W.S., Kim, M.S., Jang, K.H., Song, J.H., Rodrigue, H., Chun, D.M., Cho, Y. T., Ko, S. H., Cho, K. J., Cha, S. W., Min, S.K., Jeong, S. H., Jeong, H., Lee, C. M., Chu, C. N. and Ahn, S.H., 2016, "From Design for Manufacturing (DFM) to Manufacturing for Design (MFD) via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift," International Journal of Precision Engineering and Manufacturing-Green Technology, KSPE, Springer, Vol. 3, No. 2, pp. 209-222, April.
[28] Park, S.I., Quan, Y.J., Kim, S.H., Kim H., Kim S., Chun, D.M., Lee C. S., Taya M., Chu, W.S.* and Ahn, S.H.*, 2016, "A Review on Fabrication Processes for Electrochromic Devices," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 3, No. 4, pp. 397-421 (SCI(E), IF 2.545, JCR Rank 16/132 in Engineering, Mechanical, ISSN: 2288-6206, DOI 10.1007/s40684-016-0049-8).
[27] Huu-Duc Nguyen-Tran, Hyun-Seok Oh, Sung-Tae Hong, Heung Nam Han, Jian Cao, Ahn, S.H. and Chun, D.M., 2015, "A Review of Electrically-Assisted Manufacturing," International Journal of Precision Engineering and Manufacturing-Green Technology, October 2015, Volume 2, Issue 4, pp 365-376.
[26] Chu, W.S., Chun, D.M., and Ahn, S.H., 2014, "Research Advancement of Green Technologies," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol.15, No. 6, pp. 973-977, June (SCIE, IF 1.585, DOI: 10.1007/s12541-014-0424-8, ISSN: 2234-7593, JCR Impact Factor Rank: 33/128 in Mechanical (2013)).
[25] Chun, D.M., Gaasuren Davaasuren, Chi-Vinh Ngo, Kim, C.S., Lee, G.Y., Ahn, S.H., 2014, "Fabrication of Transparent Superhydrophobic Surface on Thermoplastic Polymer using Laser Beam Machining and Compression Molding for Mass Production," CIRP Annals Manufacturing Technology, Technische Rundschau Edition Colibri Ltd. (Switzerland), Vol. 63, Issue 1, pp. 525-528 (SCIE).
[24] Chun, D.M., Kim, C.S., Choi, J.O.,Lee, G.Y. and Ahn, S.H., 2014, "Multi-layer Deposition of Ceramic and Metal at Room Temperature using Nano-Particle Deposition System (NPDS) and Planarization Process," International Journal of Advanced Manufacturing Technology, Springer, Vol. 72, No. 1, PP. 41-46 (SCI, IF 1.1, ISSN: 0268-3768).
[23] Ahn, S.H., Chun, D.M., and Chu, W.S., 2013, "Perspective to Green Manufacturing and Applications," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol.14, No. 6, pp. 873-874, June (SCIE, IF 1.585, DOI: 10.1007/s12541-013-0114-y, ISSN: 2234-7593, JCR Impact Factor Rank: 33/128 in Mechanical (2013)), IJPEM Most Cited Article Award, 2013 to 2014 (Nov. 20, 2015).
[22] Chun, D.M., Choi, J.O., Lee, C.S., Kanno, I., Kotera, H. and Ahn, S.H., 2012, "Nano-particle deposition system (NPDS): Low energy solvent-free dry spray process for direct patterning of metals and ceramics at room temperature," International Journal of Precision Engineering and Manufacturing, KSPE (Korea) Vol. 13, No. 7, pp. 1107-1112, (SCI, IF 1.060, ISSN 2234-7593, JCR Impact Factor Rank: 33/128 (2013) in ENGINEERING, MECHANICAL).
[21] Ahn, S.H., Choi, J.O., Kim, C.S., Lee, G.Y., Lee, H.T., Kyujin Cho, Chun, D.M., C. S. Lee, 2012, "Laser-Assisted Nano Particle Deposition System and Its Application for Dye Sensitized Solar Cell Fabrication," CIRP Annals - Manufacturing Technology, Elsevier (Netherland), Vol. 61, No. 1, pp. 575-578 (SCIE, IF 1.708), JCR Impact Factor Rank: 3/43 (2013) in ENGINEERING, INDUSTRIAL, Top 10% in ENGINEERING, INDUSTRIAL.
[20] Chun, D.M., Choi, J.O.,Caroline S. Lee, Ahn, S.H.*, 2012, "Effect of Stand-off Distance for Cold Gas Spraying of Fine Ceramic Particles (< 5 μm) under Low Vacuum and Room Temperature using Nano-Particle Deposition System (NPDS)," Surface and Coatings Technology, Vol. 206, No. 8-9, 15, pp. 2125-2132, January (SCI, IF 1.998, DOI: 10.1016/j.surfcoat.2011.09.043, ISSN: 0257-8972).
[19] Kim, M.S., Chun, D.M., Choi, J.O., Lee, J.C., Kim, Yang Hee, Kim, Kwang-Su, Caroline Sunyong Lee, Ahn, S.H.*, 2012, "Dry-spray Deposition of TiO2 for Flexible Dye-Sensitized Solar Cell (DSSC) using Nano Particle Deposition System (NPDS)," Journal of Nanoscience and Nanotechnology, Vol. 12, pp. 3384-3388 (doi:10.1166/jnn.2012.5548, JCR Impact Factor Rank: 130/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY).
[18] Ahn, S.H., Chun, D.M., Kim, C.S., 2011, "Nanoscale Hybrid Manufacturing Process by Nano Particle Deposition System (NPDS) and Focused Ion Beam (FIB)," CIRP Annals - Manufacturing Technology, Elsevier (Netherland), Vol. 60, No. 1, pp. 583-586, (SCIE, I.F. 1.684, doi:10.1016/j.cirp.2011.03.071, ISSN: 0007-8506) .
[17] Kim, M.S., Chun, D.M., Choi, J.O., Lee, J.C., Kwang-Su Kim, Yang Hee Kim, Caroline Sunyong Lee and Ahn, S.H., 2011, "Room Temperature Deposition of TiO2 using Nano Particle Deposition System (NPDS): Application to Dye-Sensitized Solar Cell (DSSC)," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), Vol. 12, No. 4, pp. 749-752, August, (SCI(E), IF 1.141, DOI: 10.1007/s12541-011-0099-3 ,ISSN : 2234-7593, JCR Impact Factor Rank: 33/128 (2013) in ENGINEERING, MECHANICAL).
[16] Chun, D.M., and Ahn, S.H.*, 2011, "Deposition Mechanism of Dry Sprayed Ceramic Particles at Room Temperature using a Nano-Particle Deposition System (NPDS)," Acta Materialia, Elsevier, Vol. 59, No.7, pp. 2693-2703, April (SCI, DOI: 10.1016/j.actamat.2011.01.007, ISSN: 1359-6454), IF 3.76.
[15] Chun, D.M., Lee, J.C., Yeo, J.C., Ahn, S.H.*, S. S. Hong, and J. D. Jang, 2011, "Capacity Estimation of Torque Converters with Piston Holes using Response Surface Method and Artificial Neural Net," International Journal of Automotive Technology, Korean Soc. Automotive Engineers, Vol. 12, No. 2, pp. 273-280, April (SCIE, IF 0.51, DOI:10.1007/s12239−011−0032−x, ISSN: 1229-9138).
[14] KyuBong Jung, WooJin Song, Chun, D.M., Yeo, J.C., Kim, M.S., Ahn, S.H. and Caroline Sunyong Lee*, 2010, "Coating of Ni Powders through Micronozzle in a Nano Particle Deposition System," Metals and Materials International, Vol. 16, No. 3, pp. 465-467, Jun. (SCIE, IF 1.09, ISSN: 1598-9623), Best Paper Award.
[13] Kyubong Jung, Woojin Song, Chun, D.M., Yang-Hee Kim, Yeo, J.C., Kim, M.S., Ahn, S.H., and Caroline Sunyong Lee*, 2010, "Nickel Line Patterning using Silicon Supersonic Micronozzle Integrated with a Nano Particle Deposition System," Japanese Journal of Applied Physics, Institute of Pure and Applied Physics (IPAP) (Japan), Vol. 49, No. 5, 05EC09 (SCIE, IF 1.309) .
[12] WooJin Song, KyuBong Jung, Chun, D.M., Ahn, S.H., and Caroline Sunyong Lee*, 2010, "Deposition of Al2O3 Powder using Nano-Particle Deposition System," Surface review and letters, Vol. 17, No. 2, pp. 189-193, Apr. (SCI, IF 0.391).
[11] KyuBong Jung, WooJin Song, Chun, D.M., Yeo, J.C., Kim, M.S., Ahn, S.H., and Caroline Sunyong Lee*, 2010, "Computational Fluid Dynamics Analysis of Fabricated Micronozzle for Supersonic Particle Deposition," Surface review and letters, Vol. 17, No. 1, pp. 45-49, Feb. (SCI, IF 0.391).
[10] Chun, D.M., Kim, M.S., Yeo, J.C., Kim, M.H., Ahn, S.H.*, Caroline Sunyong Lee, 2010, "Nano/Micro Particle Beam for Ceramic Deposition and Mechanical Etching," Physica Scripta, IOP Publishing Ltd. (Sweden), Volume 2010, T139, 014047 (SCI, IF 0.970, ISSN 0031-8949).
[9] Kang, Y.C., Chun, D.M., Yan, J., and Ahn, S.H.*, 2010, "Computer-aided Environmental Design System for EuP Directive," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering, (Korea), Vol. 11, No. 3, pp. 397-406, Jun. (SCIE, IF 1.207, DOI: 10.1007/s12541-010-0046-8, ISSN: 1229-8557,JCR Impact Factor Rank: 33/128 (2013) in ENGINEERING, MECHANICAL), IJPEM Highly Commended Paper Award.
[8] Lee, J.W., Lee, J.C., Choi, W.Y., Chun, D.M., and Ahn, S.H.*, 2010, "Design of Repeat-antenna Package for Mobile Communication Made of Ferrite-loaded Glass-fabric/Epoxy Composites," Advanced composite materials, BRILL, Vol. 19, pp. 215-228, June, (SCIE, IF 0.404, DOI:10.1163/092430410X490464, ISSN: 0924-3046).
[7] Woojin Song, Kyubong Jung, Chun, D.M., Ahn, S.H., and Caroline Sunyong Lee*, 2009, "Nanoparticle Deposition of Al2O3 Powder on Various Substrates," Materials Transactions, Japan Inst Metals, Vol. 50, No. 11, pp. 2680-2684, Oct (SCI IF 0.753, ISSN: 1345-9678).
[6] Pandey, J.K., Kim, M.H., Chun, D.M., Lee, C. S. and Ahn, S.H.*, 2009, "Surface Modification of Polyethylene (PE) by the Deposition of Titanium Dioxide (TiO2) Nano-particles to Enhance the Photocatalytic Activities," Surface review and letters Vol. 16, No. 2, pp. 259-263 (SCI, IF 0.391, DOI: 10.1142/S0218625X09012561, updated 090424).
[5] Beomkeun Kim, Yongsu Kim, Chun, D.M., Ahn, S.H.*, Jae-Duk Jang , 2009, "Durability Improvement of Automotive V-belt Pulley ," International Journal of Automotive Technology, Korean Soc. Automotive Engineers(KSAE), Vol.10, No. 1, pp.73-77, (SCIE IF 0.515,DOI: 10.1007/s12239-009-0009-1, ISSN: 1229-9138) February .
[4] Chun, D.M., Kim, M.H., Lee, J.C., and Ahn, S.H.* (Submitted by S. I. Oh), 2008, "TiO2 Coating on Metal and Polymer Substrates by Nano Particle Deposition System (NPDS)," CIRP Annals - Manufacturing Technology, TECHNISCHE RUNDSCHAU EDITION COLIBRI LTD (Switzerland), Vol. 57, No. 1, pp. 551-554, Elsevier (SCIE, IF 1.123, doi:10.1016/j.cirp.2008.03.111, ISSN: 0007-8506 ).
[3] Chun, D.M., Kim, M.H., Lee, J.C., and Ahn, S.H.*, 2008, "A Nano-particle Deposition System for Ceramic and Metal Coating at Room Temperature and Low Vacuum Conditions," International Journal of Precision Engineering and Manufacturing, Korean Society for Precision Engineering, in co-publication with Springer Verlag GmbH, Vol.9 No.1, pp.51-53, (SCIE, ISSN: 1229-8557) January.
[2] Lee, J.C., Chun, D.M., Ahn, S.H.*, and Lee, Caroline Sunyong, 2007, "Material Properties of Thick Aluminum Coating Made by Cold Gas Dynamic Spray Deposition," Key Engineering Materials, Scientific, Vol. 345-346, pp. 1097-1100, April (DOI: 10.4028/www.scientific.net/KEM.345-346.1097) .
[1] Chun, D.M., Kim, H.J., Lee, J.C., Ahn, S.H.*, and Jang, J. D., 2007, "Web-based Material Database for Material Selection and Its Application Programming Interface (API) for CAD," Key Engineering Materials, Scientific, Vol.345-346, pp. 1593-1596, April (None, IF None, DOI: 10.4028/www.scientific.net/KEM.345-346.1593, ISSN: None).
CATEGORY : DOMESTIC JOURNAL
[6] 천두만*, 안성훈, 2013, "차량 경량화를 위한 사출성형 유리섬유강화플라스틱의 온도 및 수분 흡수에 따른 기계적 물성 변화," Transactions of the Korean Society of Mechanical Engineers A, Vol. 37, No. 2, pp. 199~204.
[5] 김형중, 이경태, 천두만, 안성훈*, 장재덕, 2008, "웹 기반 자동차용 스틸 풀리 설계 지원 시스템," 한국자동차공학회 논문집, 자동차공학회, Vol. 16, No. 6, pp. 1-7, 11월.
[4] 이재철, 천두만, 안성훈*, 여준철, 장재덕 , 2008, "토크컨버터 해석을 위한 다물체 자료 변환 프로그램 개발," 한국자동차공학회지, 한국자동차공학회, Vol. 16, No. 2, pp. 58-65, 3월.
[3] 천두만, 안성훈*, 2006, "인터넷 기반 설계 및 생산," 한국정밀공학회, Vol.23, No.3, pp.32-38, 3월, 특집.
[2] 천두만,안성훈*,장재덕, 2006, "웹기반 재료 데이터베이스 구축 및 자동차 엔진풀리 재료선정 예," 한국자동차공학회논문집, Vol.14, No.4, pp.107-pp.114, 7월.
[1] 안혜리*,천두만,안성훈, 2005, "증강현실(Augmented Reality)기술을 활용한 미술교육," 미술교육논총, Vol.19, No.3, pp.455-474, 12월.
CATEGORY : INTERNATIONAL CONFERENCE
[42] Kim, J.S., Choi, I.G., Park,Samuel, Park, S.I., Ahn, S.H., Chun, D.M., Lee, C.S., and Chu, W.S., 2017, "Thermal treatment for enhanced performance of NPDS (nano particle deposition system) to fabricate large scale (1m x 1m) electrochromic windows," 43rd International Conference on Micro and Nanoengineering (MNE 2017), September 18-22, INL, Braga, Portugal.
[41] Chu, W.S., Park, S.I., Lee, J.Y., Kim, J.S., Choi, I.G., Park,Samuel, Kim, S.H., Chun, D.M., Lee, C.S., and Ahn, S.H., 2017, "Cost-Effective Process Development for Large Area Smart Window," International Conference on Energy and Sustainability, Aug 9 - 12, Nelson Mandela African Institution of Science and Technology Arusha, Tanzania.
[40] Kim, J.S., Choi, I.G.,Park, S.I., Chun, D.M., Lee, C.S., Chu, W.S. and Ahn, S.H., 2017, "Effect of thermal treatment about NPDS (Nano Particle Deposition System) for electrochromic window," International Symposium on Green Manufacturing and Applications (ISGMA2017), Korean Society for Precision Engineers (KSPE), June 27(Tue) ~ July 1(Sat), 2017, Hwabaek International Convention Center, Gyeongju, Korea.
[39] Park, S.I., Choi, I.G., Chun, D.M., Lee, C.S., Chu, W.S. and Ahn, S.H., 2017, "Effect of Plasma Assisted Deposition for Electrochromic Windows Fabrication Using Nano Particle Deposition System," International Symposium on Green Manufacturing and Applications (ISGMA2017), Korean Society for Precision Engineers (KSPE), June 27(Tue) ~ July 1(Sat), 2017, Hwabaek International Convention Center, Gyeongju, Korea.
[38] Lee, J.Y., Hyungsup Kim, Kim, S.H., Ahn, S.H., Lee, C.S., Chun, D.M., Chu, W.S., 2016, "Life-cycle test on electrochromic windows fabricated by Nano-Particle Deposition System (NPDS)," The 10th Asian-Australasian Conference on Composite Materials (ACCM-10), October 16-19, Bexco, Busan, Korea..
[37] Lee, G.Y., Yoon, H.S., Kim, C.S., Ahn, S.H., and Chun, D.M., 2014, "Fabrication of 3D silver structures using aerodynamically focused nanoparticle (AFN) printing," CIRP STC S meeting, CIRP, August 28, Nantes, France (Scientific Technical Committe meeting).
[36] Ahn, S.H., Kim, C.S., Lee, G.Y., Chun, D.M., C. S. Lee, J. Jeong and D.-Y. Jang, 2013, "Nanostructured Surface by Nano Particle Deposition System: Method and Mechanism," 63th General Assembly in Conpenhagen, Denmark August 18-24, Part II presentation.
[35] Ahn, S.H., Choi, J.O., Kim, C.S., Lee, G.Y., Lee, H.T., Kyujin Cho, Chun, D.M., C. S. Lee, 2012, "Laser-assisted nano particle deposition system and its application for dye sensitized solar cell fabrication," 62nd CIRP General Assembly, CIRP, August 19-25, Hong Kong, China, Part I presentation.
[34] Kim K. S., Kim Y. H., Chun, D.M., Ahn, S.H., Lee, C.S., 2011, "Study of electrical properties of Cu line deposited via NPDS(Nano Particle Deposition System) through optimization of deposition using CFD(Computational Fluid Dynamics)," 2011 MRS spring.
[33] Choi, J.O.,Lee, G.Y.,Kim, C.S.,Kim, D.H.,Kim, M.S.,Chun, D.M.,C.S. Lee,Ahn, S.H., 2011, "Dye-sensitized solar cell (DSSC) with TiO2 multilayer fabrication by nano particle deposition system (NPDS)," The 18th International Conference on Composite Materials (ICCM18), The Korean Society of Composite Materials (KSCM), August 21-26, 2011, ICC Jeju, Jeju island, Korea.
[32] Chun, D.M., Kim, C.S., Choi, J.O., Caroline Sunyong Lee, Ahn, S.H., 2011, "Metal and Ceramic Multi-layer Deposition at Room Temperature using Nano-Particle Deposition System (NPDS)," 4th International Conference of Asian Society for Precision Engineering and Nanotechnology, November 16-18, Langham Place Hong Kong Hotel, Hong Kong, China., Best Paper Award.
[31] Bhandari, B., Chun, D.M., Kim, M.S., Choi, J.O., Lee, J.C.,Y.H. Kim, C. S. Lee, Ahn, S.H., 2011, "Study of process parameters of nano particle deposition system (NPDS) by computational fluid dynamics for the fabrication of dye-sensitized solar cells (DSSC)," World Engineers’ Convention 2011, Geneva 4-9 September.
[30] Chun, D.M.,Kim, C.S.,Kim, H.J.,Choi, J.O.,Kim, D.H.,Jiseong Lee,Dong-Young Jang,Ahn, S.H., 2011, "Design for Energy Saving in Scan Controlled Focused Ion Beam Processing," International Symposium on Green Manufacturing and Applications (ISGMA 2011) , 6-7 October , Seoul National University ,Seoul , Korea .
[29] Chun, D.M., Choi, J.O., Lee, G.Y., Ahn, S.H.*, 2011, "Fabrication of semi-conductive oxide layer on polymer substrate for dye-sensitized solar cell using nano particle deposition system and laser treatment," International Symposium on Green Manufacturing and Applications (ISGMA 2011) October 6~7, 2011 Seoul National University, Seoul, KOREA.
[28] Chun, D.M., Choi, J.O., Caroline S. Lee, Isaku Kanno, Hidetoshi Kotera, Ahn, S.H.*, 2011, "Nano-particle deposition system (NPDS) : low energy solvent-free dry spray process for metal and ceramic films," International Symposium on Green Manufacturing and Applications (ISGMA 2011) October 6~7, 2011 Seoul National University, Seoul, KOREA.
[27] Chun, D.M., Kim, H.J., Yoon, H.S., Song, S.H., Ahn, S.H.*, 2011, "Study of multi-dimensional design approach for simultaneous consideration of functional and environmental requirements based on multiple criteria decision making," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Korean Society of Precision Engineering and Manufacturing (KSPE) and etc., October 6-7, Seoul National University, Seoul, KOREA.
[26] Kim, C.S., Chun, D.M., Choi, J.O., Lee, G.Y., Kim, D.H., and Ahn, S.H., 2011, "Characterization of Room Temperature Nanoparticle Deposition on Patterned Substrate," The 2nd International Symposium on Hybrid Materials and Processing (HyMap 2011), National Core Research Center for Hybrid Materials Solution, Pusan National University, Busan, Korea ,October 27-29, Busan, Korea .
[25] Ahn, S.H., Chun, D.M., Kim, C.S., 2011, "Nanoscale Hybrid Manufacturing Process by Nano Particle Deposition System (NPDS) and Focused Ion Beam (FIB)," 61st CIRP General Assembly, CIRP, August 21-27, Budapest, Hungary, Part I presentation.
[24] Kim, Y.H., Kim, K.S., Cho, D.G., Kim, M.S., Chun, D.M., Lee, J.C., Ahn, S.H., and Lee, C.S.*, 2010, "Investigation of photovoltaic efficiency of dye sensitiezed solarcell fabricated by Nano Particle Deposition System (NPDS) bt varying thickness of sealing sheets," 2010 Materials Research Society fall meeting, November 29-December 3, Boston, MA, US.
[23] Kim, Y.H., Shin, S.H., Kim, K.S., Lee, C.S.*, Kim, M.S., Chun, D.M., and Ahn, S.H., 2010, "Fabrications of TiO2 Layers for Dye Sensitized Solar Cell using Nano-Particle deposition system (NPDS)," IUMRS-ICEM2010 (International Union of Materials Research Societies - International Conference on Electronic Materials 2010), August 22-27, KINTEX, Seoul, Korea.
[22] Kim, Y.H., Kim, K.S., Cho, D.G., Kim, M.S., Chun, D.M., Lee, J.C., Ahn, S.H., and Lee, C.S*, 2010, "Fabrication of Different Particle Size of TiO2 for Dye-Sensitized Solar Cell (DSSC) Using Nano Particle Deposition System (NPDS)," ENGE 2010 International Conference on Electronic Materials and Nanotechology for Green Environment, November 21-24, 2010, Ramada Plaza Jeju Hotel, Jeju Island, Korea.
[21] Kim, M.S., Chun, D.M., Lee, J.C., Kim, Y.H., Kim, K.S., Caroline Sunyong Lee, Ahn, S.H.*, 2010, "Dry-spray deposition of TiO2 for flexible dye-sensitized solar cell (DSSC) using nano particle deposition system (NPDS)," ENGE 2010 International Conference on Electronic Materials and Nanotechology for Green Environment, November 21-24, 2010, Ramada Plaza Jeju Hotel, Jeju Island, Korea.
[20] Chun, D.M., Kim, M.S., Yeo, J.C., Caroline Sunyong Lee, and Ahn, S.H.*, 2010, "Nano Particle Deposition System (NPDS) for Room Temperature Deposition of Metals and Ceramics," Joint International Symposia on 3rd Micro & Nano Technology and Micro/Nanoscale Energy Conversion & Transport-2010 (MNT&MECT 2010), Pacific Center of Thermal-Fluids Engineering & International Center for Heat & Mass Transfer, March 21-24, Seoul National University, Seoul, Korea.
[19] Chun, D.M., Kim, M.S., Yeo, J.C., Lee, C. S., and Ahn, S.H.*, 2009, "Fabrication of conductive track in room temperature by nano particle deposition system (NPDS)," 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN), November 11-13, Kitakyushu, Japan.
[18] KyuBong Jung, WooJin Song, Chun, D.M., Ahn, S.H., and Caroline Sunyong Lee*, 2009, "Computational fluid dynamics analysis of fabricated micronozzle using DRIE for supersonic particle deposition," The 3rd International Symposium on Functional Materials (ISFM 2009), Gyungsang National University, June 15-18, Dong-Bang Hotel, Jinju, Korea.
[17] Woojin Song, Kyubong Jung, Chun, D.M., Ahn, S.H., and Caroline Sunyong Lee*, 2009, "Deposition of Al2O3 powder Using Nano-Particle Deposition System," The 3rd International Symposium on Functional Materials (ISFM 2009), Gyungsang National University, June 15-18, Dong-Bang Hotel, Jinju, Korea.
[16] K. B. Jung, W. J. Song, J. G. Kim , Chun, D.M., Ahn, S.H., and C. S. Lee*, 2009, "Study of Supersonic Flow Behavior in Fabricated Micro-nozzle using 3-Dimensional Analysis," 2009 Materials Research Society spring meeting, April 13-17, San Francisco, CA, USA.
[15] W. J. Song, K. B. Jung, Chun, D.M., Ahn, S.H., J. G. Kim and C. S. Lee*, 2009, "Variation of Process Parameters to Control Profiles of Supersonic Micronozzle Using DRIE Process," 2009 Materials Research Society spring meeting, April 13-17, San Francisco, CA, USA.
[14] Seong-Min JEONG*, Kwang-Jin KIM, Tae-Ui Hong, Jae-Hong Choi, Chun, D.M. and Ahn, S.H., 2009, "Building of a Web-Based Materials Database Supporting Ceramic Industry - Ceramics Bank," Materials Science & Technology 2009 Conference & Exhibition, 2009. 10.25-29 / David L. Lawrence Convention Center, Pittsburgh, Pennsylvania.
[13] Chun, D.M., Kim, M.S., Yeo, J.C., Kim, M.H., Ahn, S.H.*, 2009, "Nano/Micro particle beam for ceramic deposition and mechanical etching," The 3rd International Symposium on Functional Materials, June 15-18, Dongbang Hotel, Jinju, Korea.
[12] Chun, D.M., Kim, M.H., Yeo, J.C., Hong, Y.S., Park, J.B. and Ahn, S.H.*, 2008, "MICRO ROBOT FOR CARDIOVASCULAR TREATMENT: STUDY ON CHRONIC TOTAL OCCLUSION (CTO) ," The 39th International Symposium on Robotics (ISR 2008), Institute of Control, Robotics and Systems & International Federation of Robotics, October 15-17, COEX, Seoul, Korea.
[11] Chun, D.M., Kim, M.H., Lee, J.C., and Ahn, S.H.*, 2008, "Nano particle deposition system (NPDS) for ceramic and metal coating at room temperature and low vacuum condition," 2008 International Conference on Smart Manufacturing Application (ICSMA), Institute of Control, Robotics and Systems (ICROS) and Korea Machine Tool Manufacturers' Association (KOMMA), April 9-11, KINTEX, Gyeonggi-Do, Korea.
[10] Chun, D.M., Kim, M.H., Lee, J.C., and Ahn, S.H.*, 2008, "TiO2 Coating on Metal and Polymer Substrates by Nano Particle Deposition System (NPDS)," The 58th CIRP General Assembly, CIRP (The International Academy for Production Engineering), August 24-30, Manchester, UK, Part I presentation.
[9] Beomkeun Kim, Yongsu Kim, Chun, D.M., Ahn, S.H.* and Jae-Duk Jang, 2007, "Fatigue life analysis of automotive V-belt pulley," 14th Asia Pacific Automotive Engineering Conference, Society of Automotive Engineers (SAE), August 5-8, Hollywood, California, USA..
[8] Kim, H.J., Lee, K.T., Kim, J.S., Chun, D.M., Ahn, S.H.*, and Jang J. D., 2007, "A study on Generalized Regression Neural Networks using Genetic Algorithm for Preliminary design of steel pulley," 3rd Korea-China Joint Conference on Geometric and Visual Computing (KCJC 2007), August 22-24, Seoul, Korea.
[7] Chun, D.M., Lee, J.C., Ahn, S.H.*, 2007, "Nano Particle Deposition System," 2nd HU-SNU Symposium on Mechanical and Aerospace Engineering, Department of Mechanical and Intelligent System Engieering, Hokkaido University and School of Mechanical and Aerospace Engineering, Seoul National University, January 26, 2007, Hokkaido University, Sapporo, Japan .
[6] Lee, J.C.,Chun, D.M.,and Ahn, S.H., 2007, "Material properties of thick aluminum coating made by cold gas dynamic spray deposition," 10th International Conference on the Mechanical Behavior of Materials, Korean Institute of Metals and Materials, Korean Society of Mechanical Engineers, May 27-31, 2007, BEXCO, Busan, Korea.
[5] Chun, D.M., Lee, J.C., Ahn, S.H.*, and Jang, J. D., 2007, "WEB-BASED MATERIAL DATABASE FOR MATERIAL SELECTION AND ITS APPLICATION PROGRAMMING INTERFACE (API) FOR CAD," 10th International Conference on the Mechanical Behavior of Materials, Korean Institute of Metals and Materials, Korean Society of Mechanical Engineers, May 27-31, 2007, BEXCO, Busan, Korea.
[4] Chun, D.M., Ahn, S.H.*, J.D. Jang, 2006, "Web-based material database for material selection and its expansible architecture," International Conference of Mechanical & Automotive Technologys, 26-28 April, Chonbuk National University, Jeonju, Jeonbuk, Korea.
[3] Chun, D.M., Kim, H.J., Ahn, S.H.*, Bong-Hoon Oh, Gyu-Bong Lee, Jae-Duk Jang, 2006, "WEB-BASED DESIGN AND MANUFACTURING SUPPORT SYSTEM FOR AUTOMOTIVE STEEL PULLEY," 2006 International Symposium on Flexible Automation, July 10-12, Osaka, Japan.
[2] Kim, H.J., Chun, D.M., Ahn, S.H.*, Kim, Dong-Soo, Jun, Cha-Soo, and Wright, Paul K., 2006, "Web-based Design and Manufacturing System for Micro Machining," Transactions of the North American Manufacturing Research Institution, Vol. 34, pp. 349-355, May 1, Marquette University, Milwaukee, Wisconsin, USA.
[1] Chun, D.M., Kim, H.J., Ahn, S.H.*, Jang, J. D. and Lee, G. B., 2006, "SmartPulley : Web-based Design Support System for Automotive Steel Pulley," SAE2006 World Congress, Detroit, Michigan, USA, April 3-7.
CATEGORY : DOMESTIC CONFERENCE
[26] 최인규, 이장엽, Kim, H. S., 천두만, 이선영 안성훈, 추원식, 2017, "전하량 균형을 통한 ECW의 투과도 개선," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월17일~19일, 라마다프라자제주호텔, 제주..
[25] 김지수, 최인규, 안성훈, 이선영, 천두만, 추원식, 2017, "나노분말적층시스템를 활용한 대면적 전기변색 창문 제작을 위한 공정 변수 최적화," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월17일~19일, 라마다프라자제주호텔, 제주..
[24] 박성익, 김세헌, 천두만, 이선영, 추원식 and 안성훈, 2016, "전기변색유리 제작을 위한 대면적 나노 파티클 적층 장비 개발," 한국정밀공학회 추계학술대회, 한국 정밀공학회, 10월 26~28일, 여수 디오션리조트, 여수, 최우수상.
[23] 김충수, 윤해성, 이현택, 천두만, 안성훈, 장동영, 2013, "집속이온빔을 이용한 국부영역의 선택적 가공 ," 한국생산제조시스템학회 춘계학술대회, 한국생산제조시스템학회, 4월 24~26일, BEXCO, 부산.
[22] 천두만, 오현석, 안성훈, 2012, "나노입자 적층시스템에서 입자크기의 영향에 관한 연구 ," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원, 광주.
[21] 천두만, 윤해성, 송성혁, 천두만, 안성훈, 2011, "공학용 재료 선택을 위한 다차원 설계 기법 연구," 대한기계학회 2011년도 추계학술대회, 대한기계학회, 11월 2일~4일, EXCO, 대구.
[20] 천두만, 김민생, 이종천, 최정오, 안성훈*, 2010, "나노 입자 적층 시스템에서의 공정조건에 따른 Al2O3 세라믹 입자의 적층 특성 변화 연구 (Study of the effect of process parameters in nano particle deposition system (NPDS) for Al2O3 powder deposition)," 한국정밀공학회 2010년도 추계학술대회, 11월 10-12일, 창원컨벤션센터, 창원.
[19] 천두만, 김민생, 여준철, 이선영, 안성훈*, 2010, "나노 입자 적층 시스템을 이용한 Al2O3 세라믹입자의 고속충돌에 의한 적층 메커니즘 연구," 2010년도 한국세라믹학회 춘계 연구발표회, 한국세라믹학회, 4월 22~23일, 창원컨벤션센터, 창원.
[18] 김양희, 신상훈, 김광수, 김민생, 천두만, 이종천, 안성훈, 이선영* , 2010, "나노 입자 적층 시스템을 이용하 TiO2 충의 염료감응태양전지(DSSC) 제조에 대한 연구," 2010년도 대한금속 재료학회 춘계 학술대회, 대한금속 재료학회, 4월 22~23일, 현대성우리조트, 횡성.
[17] 김민생, 천두만, 이종천, 김양희, 신상훈,이선영, 안성훈*, 2010, "나노 입자 적층 시스템을 이용한 TiO2 세라믹의 상온 적층 : 염료감응형 태양전지 제작에 응용," 2010년도 한국세라믹학회 춘계 연구발표회, 한국세라믹학회, 4월 22~23일, 창원컨벤션센터, 창원.
[16] 송우진, 정규봉, 천두만, 안성훈 and 이선영*, 2009, "초음속 마이크로노즐에 적합한 프로파일을 위한 공정변수의 최적화 ," 한국재료학회 2009년도 춘계학술대회, 5월 21~22일, 무주리조트, 전북 무주., 우수발표 논문상.
[15] 정규봉, 송우진, 천두만, 여준철, 안성훈 and 이선영*, 2009, "Deep RIE를 이용하여 제작된 마이크로 노즐 내에서 유체의 거동에 대한 컴퓨터 시뮬레이션 분석 ," 한국재료학회 2009년도 춘계학술대회, 5월 21~22일, 무주리조트, 전북 무주..
[14] 천두만, 김민형, 이재철, 안성훈*, 2008, "세라믹과 금속재료 코팅을 위한 나노입자적층 시스템," 대한기계학회 마이크로/나노공학부문 춘계학술대회, 대한기계학회, 5월 30일, 서울대학교 정밀기계설계 공동연구소, 서울.
[13] 김민형, 천두만, 여준철, 홍영선, 박정빈, 안성훈*, 박종하, 류새희, 이선영, 2008, "관상동맥 내 CTO(Chronic Total Occlusion) 제거를 위한 드릴 툴 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 11~13일, 제주컨벤션센터, 제주.
[12] 이재철, 천두만, 여준철, 안성훈*, 장재덕, 2008, "유체-구조 해석을 위한 다물체 자료 변환 프로그램 개발 : 토크 컨버터의 예," 한국 CAD/CAM 학회 학술발표회, 한국 CAD/CAM 학회, 1월 31일~2월2일, 보광휘닉스파크 컨벤션센터, 평창.
[11] 천두만, 이재철, 여준철, 이경태, 안성훈*, 장재덕, 2008, "토크 컨버터 록업 클러치의 전달 토크용량 예측 프로그램 개발," 한국 CAD/CAM 학회 학술발표회, 한국 CAD/CAM 학회, 1월 31일~2월2일, 보광휘닉스파크 컨벤션센터, 평창.
[10] 김형중, 이경태, 천두만, 안성훈*, 장재덕, 2007, "자동차용 스틸 풀리의 초기 설계를 위한 다층 신경망에 관한 연구," 한국 캐드캠 학회 하계 워크샵, 한국 캐드캠 학회, 8월 23일, 서울대학교, 서울.
[9] 김형중, 이경태, 김지석, 천두만, 안성훈*, 장재덕, 2007, "스틸 풀리 초기 설계를 위한 일반화된 회귀 신경망에 관한 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 21~22일, 제주컨벤션센터, 제주.
[8] 강윤철,천두만,여준철,안성훈*, 2007, "EuP 대응 친환경 설계를 위한 재료 선정 시스템," 2007년 한국CAD/CAM학회 학술발표회, 한국CAD/CAM학회, 1월 31일~2월 2일, 보광휘닉스파크 컨벤션센터, 강원도 평창.
[7] 이재철, 천두만, 안성훈, 장재덕, 2006, "유동해석 결과를 구조해석에 적용하는 다물체 자료 변환 프로그램 : 토크컨버터 해석의 예," 대한기계학회 추계학술대회, 대한기계학회, 11월 1일~3일, 무주리조트, 무주.
[6] 이재철, 천두만, 안성훈, 장재덕, 2006, "유동해석 결과를 구조해석에 적용하는 자료 변환 프로그램 : 토크컨버터 해석의 예," 대한기계학회 춘계학술대회, 대한기계학회 , 6월 7일~9일, 제주 국제컨벤션센터(ICC제주), 제주.
[5] 김형중, 천두만, 안성훈*, 황범철, 장재덕, 2006, "웹 기반 자동차용 엔진 풀리 설계 지원 시스템," 한국정밀공학회 2006, 춘계학술대회, 경주교육문화회관, 5월 18~19일.
[4] 김명현, 배준범, 백원중, 이윤석, 김휘준, 천두만, 안성훈*, 2006, "웹 기반 베어링 선정 지원 S/W의 개발," 2006년 한국CAD/CAM학회 학술발표회, 한국CAD/CAM학회, 보광휘닉스파크 컨벤션센터, 2월 9일~11일, 보광휘닉스파크 컨벤션센터, 강원도 평창.
[3] 천두만, 김형중, 김휘준, 이재철, 안성훈*, 장재덕, 2006, "재료사용 정보를 포함한 웹기반 재료 데이터베이스의 구축 - 자동차용 부품의 예," 2006 한국 CAD/CAM 학회 학술발표회, 보광휘닉스파크 컨벤션센터, 2월 9일~11일.
[2] 김형중, 천두만, 안성훈*, 장재덕, 홍순석, 황범철, 2005, "자동차용 엔진 풀리 설계 변수의 상관관계 분석," 한국정밀공학회, 춘계학술대회, 6월, 라마다프라자 호텔, 제주도.
[1] 천두만, 안성훈*, 2005, "웹기반 재료 DB 구축 및 3D 그래프를 사용한 물성비교," 한국정밀공학회, 춘계학술대회, 제주도(라마다프라자), 6월.
CATEGORY : THESIS
[1] Chun, D.M., 2010, "Development of nano particle deposition system (NPDS) for room temperature deposition of metals and ceramics and its applications," Ph. D. Thesis, Seoul National University.
CATEGORY : INVITED PRESENTATION
[11] Ahn, S.H., Chun, D.M., Choi, J.O., Kim, C.S., Lee, G.Y., Lee, H.T., K. J. Cho, C. S. Lee, 2012, "Nano Particle Deposition System (NPDS) and Its Applications to Energy Devices," International Symposium on Green Manufacturing and Applications 2012, Jeju, Korea, August 28, Keynote speech.
[10] Ahn, S.H., Kim, C.S. and Chun, D.M., 2011, "Nanoscale 3D Printing System," the 5th TU-SNU-UT Joint symposium, Tsinghua University, June 7-8, Beijing, China.
[9] Chun, D.M., Ahn, S.H., 2010, "Nano particle deposition system (NPDS) and numerical analysis for the effects of process parameters and bonding mechanism," 전자부품연구원, 성남, Dec. 22.
[8] Ahn, S.H., (Chun, D.M.), 2010, "교차인쇄방법을 이용한 절연회로 제작방법 및 장치, 초음속분사적층기술을 이용한 금형보수방법," 대·중소기업상생협력, 기계설비 분야 기술이전설명회, 한국산업기술진흥원, 삼성전자, 코엑스, 서울, October 5.
[7] Ahn, S.H., Chu, W.S., Jung, B.S., Kim, M.H., and Chun, D.M., 2009, "Introduction to biomedical research in IDIM," University of Edinburgh (Prof. McGeough Group), July 27.
[6] Ahn, S.H., (Chun, D.M., Kim, M.H., Lee, J.C.), 2008, "Development of Nano Particle Deposition System (NPDS) for low temperature deposition of metals and ceramics," 2008 한국-벨라루스「과학의 날」, 교육과학기술부, 12월3일, 서울 신라호텔 영빈관.
[5] Ahn, S.H., (Chun, D.M., Kim, M.H., Lee, J.C.), 2008, "금속 및 세라믹 입자의 저온 적층을 위한 Nano Particle Deposition System의 개발과 응용," 한국정밀공학회 추계학술대회, (사)한국정밀공학회, 11월 13일, 대전컨벤션센터, 대전, Plenary speech.
[4] Ahn, S.H., Chun, D.M., Kim, M.H., Lee, J.C., 2008, "Cold spray와 Nano Particle Deposition System을 이용한 금속 및 세라믹 입자의 저온 적층과 응용," 대한기계학회 추계학술대회, 대한기계학회, 11월5일~7일, 용평리조트, Key note speech (session).
[3] Chun, D.M., Kim, M.H., Lee, J.C., and Ahn, S.H., 2008, "Nano Particle Deposition System," BK21, Joint Workshop Seoul National University - The University of Tokyo, January 15, Tokyo, Japan .
[2] Ahn, S.H., Chun, D.M., 2007, "웹기반 재료 데이터베이스 구축사례 ," 요업기술원, 10/25.
[1] Ahn, S.H., Kim, H.J., Chun, D.M., 2006, "CAD 활용 설계 연습," 서울대학교 공과대학 산업안전최고전문가과정, 5월.
CATEGORY : PATENT
[20] 천두만, 박하니, 이선영, 안성훈, 추원식, 2017, "광촉매 박막제작장치 및 광촉매 박막제작방법 (Photocatalytic thin film manufacturing apparatus and method)," 출원번호: 10-2017-0097768, 출원일: 2017.08.01.
[19] 이선영, 안성훈, 추원식, 천두만, 김형섭, 최다현, 김광민, 2016, "전기 변색층과 이온 저장층을 포함하는 전기 변색 소자 및 그 제조 방법," 출원번호: PCT/10-2016-0069170, 출원일: 2016.03.06.
[18] 천두만, 박하니, 최준호, 안성훈, 추원식, 이선영, 2016, "건식 입자 분사 노즐," 출원번호: 10-2016-0110754, 출원일: 2016.08.30, 등록번호: 10-1781074, 등록일: 2017.09.18.
[17] 천두만, 나심 모하마드 누르, 이선영, 안성훈, 추원식, 2016, "그래핀 플레이크 박막 제작장치 ," 출원번호: 10-2016-0107824, 출원일: 2016.08.24.
[16] 이선영, 최다현, 이민지, 김형섭, 김광민, 천두만, 추원식, 2016, "투명전극 및 그 제조방법과 이를 이용한 전기변색소자," 출원번호: 10-2016-0026586, 출원일: 2016.03.04, 등록번호: 10-174420, 등록일: 2017.05.31.
[15] 이선영, 안성훈, 추원식, 천두만, 김형섭, 최다현, 김광민, 2016, "전기 변색층과 이온저장층을 포함하는 전기 변색 소자 및 그 제조 방법," 출원번호: 10-2016-0069170, 출원일: 2016.06.03.
[14] 안성훈, 천두만, 김충수, 2012, "나노 스케일 3차원 프린팅을 사용한 초정밀 가공 장치 및 방법 (Ultra Precision Machining Apparatus using Nano-scale Three-dimensional Printing and Method using the Same)," 출원번호: 10-2010-0096211, 출원일, 101172859, 2012.08.03 등록.
[13] 이선영, 정규봉, 송우진, 안성훈, 천두만, 2012, "분말카트리지 (Powder Cartridge)," 출원번호 : 10-2009-0097289, 출원일 : 2009.10.13, 10-1175542, 2012.08.14 등록.
[12] 안성훈, 천두만, 김충수, 2011, "집속이온빔을 이용한 가공 방법," 출원번호: 10-2011-0091500, 출원일: 2011.09.08, 등록번호: 101269562 (2013.05.24).
[11] 안성훈, 이선영, 천두만, 김민생, 최정오, 2011, "레이저를 이용한 박막 형성 장치 및 방법 (Apparatus and Method of Forming Thin Film using Laser)," 출원번호: 10-2011-0013703, 출원일: 2011.02.16, 10-1235302-0000, 등록일: 2013.02.14..
[10] 안성훈, 천두만, 김민생, 2010, "플렉서블 염료 감응 태양전자 및 이의 제조 방법," 출원번호: 5296758, 등록일: 2013.06.21..
[9] 안성훈, 김민생, 천두만, 2010, "플렉서블 염료감응 태양전지 및 이의 제조방법 (Flexible Dye-Sensitized Solar Cell and Preparation Method Thereof)," 출원번호 : 10-2010-0031548, 출원일 : 2010.04.06, , 10-0994902, 등록일 2010.11.10, JP5296758, 등록일 2013. 06. 21 .
[8] 안성훈, 천두만, 김민생, 여준철, 2010, "분말을 이용한 적층 및 기판 식각 장치 및 방법 (Deposition and Substrate Etching Apparatus and Method using Powder)," 출원번호 10-2009-0083175, 출원일 2009.9.3, 10-0964062-0000, 등록일 2010.06.08.
[7] 안성훈, 천두만, 김민생, 여준철, 2010, "분말을 이용한 상온에서의 기판상 도선 형성 장치 및 방법 (Apparatus and Method of Forming Conductive Track on Substrate at Room Temperature using Particles)," 출원번호 10-2009-0083176, 출원일 2009.9.3, 10-0972689-0000, 등록일 2010.07.21.
[6] 안성훈, 천두만, 김민생, 여준철, 2010, "불연속적인 이송 가스 공급을 이용한 분말 적층 장치 및 방법 (Apparatus and Method of Depositing Powder through Transient Supply of Conveying Gas)," 출원번호 10-2009-0084251, 출원일 2009.9.8, 10-0964060-0000, 등록일 2010.06.08.
[5] 안성훈, 천두만, 김민형, 이재철, 2010, "분말 도포 방법 및 장치 (Method and Apparatus for Coating Powder Material on Substrate)," 출원번호: 10-2008-0018085, 출원일: 2008.02.28, 10-0965024-0000, 등록일: 2010.06.11.
[4] 안성훈, 천두만, 김민형, 2009, "혈관 내의 만성완전협착 병변 제거용 버 및 이를 이용한 병변 제거 기구 (A Rotational Atherectomy Burr for Ablating Chronic Total Occlusion and the Ablation Apparatus using the Same)," 출원번호: 10-2009-0005296, 출원일: 2009.01.22.
[3] 안성훈, 여준철, 천두만, 김민형, 2008, "혈관 내의 만성완전협착 병변 제거용 카테터 (Catheter for Ablating Vascular Chronic Total Occlusion)," 출원번호: 10-2008-0061204, 출원일: 2008.06.26.
[2] 추원식, 이재철, 김형중, 천두만, 홍영선, 김충수, 이길용, 여준철, 안성훈, 2008, "체내삽입형 약물방출장치 및 이를 이용한 약물방출 제어시스템 (Implantable Drug Release Apparatus and Drug Delivery Control System using the Same)," 출원번호: 10-2008-0057191, 출원일: 2008.06.18, 10-1512514, 2015.04.09 등록.
[1] 안성훈, 천두만, 김민형, 이재철, 2008, "Method and Apparatus for Coating Powder Material on Substrate," 출원번호: US 12/038,548, 출원일: 2008.07.27.
CATEGORY : EXHIBITION
[3] Ahn, S.H., 이선영, Chun, D.M., Kim, M.S. and Choi, J.O., 2012, "레이저를 이용한 박막 형성 장치 및 방법," 2012 산학연 협력 EXPO, 2012.10.31~2012.11.2, 코엑스, 서울.
[2] Kim, H.J., Chu, W.S., Lee, J.C., Chun, D.M., Ahn, S.H., 2008, "2008 산학협력 EXPO 대학 공개 기술 투자박람회," 교육과학기술부, 지식경제부, 1월 6~8일, KINTEX.
[1] Ahn, S.H., Kim, H.J., Chu, W.S., Kang, H.J., Kim, S.H., Chun, D.M., 2005, "Web-based Design and Manufacturing Tools," ASME Computers and Information in Engineering Conference (CIE) 25th Anniversary/ASME 125th Anniversary Showcase, September 27, Long Beach, CA, USA.
CATEGORY : HONORS/AWARDS
[6] Park, S.I., Kim, S.H., Chun, D.M., Lee, C.S., Chu, W.S. and Ahn, S.H., 2016, "전기변색유리 제작을 위한 대면적 나노 파티클 적층 장비 개발," 한국정밀공학회 추계학술대회, 한국 정밀공학회, 10월 26~28일, 여수 디오션리조트, 여수, 최우수상.
[5] Chun, D.M.,Kim, C.S.,Choi, J.O.,C.S. Lee,Ahn, S.H., 2011, "Best paper Award, Metal and Ceramic Multi-layer Deposition at Room Temperature using Nano-Particle Deposition System (NPDS)," 4th International Conference of Asian Society for Precision Engineering and Nanotechnology, November 16-18, Langham Place Hong Kong Hotel, Hong Kong, China.
[4] Chun, D.M.,Choi, J.O.,Lee, G.Y.,Ahn, S.H., 2011, "Fabrication of Semi-Conductor Oxide Layer on Polymer Substrate for Eyd-Sensitized Solar Cell Using Nano Particle Deposition System and Laser Treatment," Outstanding Poster Award of Int. Symp. of Green Manufacturing and Applications 2011, Seoul National University, Korea.
[3] 정규봉, 송우진, Chun, D.M., Yeo, J.C., Kim, M.S., Ahn, S.H., 이선영, 2011, "논문상 - Coating of Ni Powders through Micronozzle in a Nano Particle Deposition System," 대한금속재료학회 2010년도 Metals and Materials International 최우수 논문, 4월 21일.
[2] Kang, Y.C., Chun, D.M., Yan, J., and Ahn, S.H.*, 2010, "IJPEM Highly Commended Paper Award - Computer-aided Environmental Design System for the Energy-using Product (EuP) Directive," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering, (Korea), Nov. 12, 2010 (IJPEM Vol. 11, No. 3, pp. 397-406, 2010).
[1] 송우진, 정규봉, Chun, D.M., Ahn, S.H., 이선영, 2009, "우수발표 논문상 - 초음속 마이크로노즐에 적합한 프로파일을 위한 공정변수의 최적화," 한국재료학회 2009년도 춘계학술대회, 한국재료학회, 5월 21~22일, 무주리조트, 전북 무주.
CATEGORY : REGISTERED SOFTWARE
[3] 장재덕, 홍순석, 안성훈, 이재철, (천두만, 여준철), 2008, "KMDCP (KAPEC Multi-body Data Conversion Program)," 컴퓨터 프로그램 보호위원회, 프로그램 등록, 등록번호: 2008-01-181-001254, 등록일: 2008.3.7.
[2] 장재덕, 홍순석, 안성훈, 천두만, (이재철, 여준철), 2008, "KLCDP (KAPEC Lock-up Clutch Design Program)," 컴퓨터 프로그램 보호위원회, 프로그램 등록, 등록번호 2008-01-123-001255, 등록일 2008-3-7.
[1] 안성훈, 천두만, 2007, "웹기반 재료 데이터베이스," 컴퓨터 프로그램 보호위원회, 프로그램 등록, 등록번호 2007-01-129-003019, 등록일 2007-06-18.