IDIM Member Publications
Hong, Y. S.


CATEGORY : INTERNATIONAL JOURNAL
[5] Hong, Y.S., Yoon, H.S., Moon, J.S., Cho, Y.M.*, and Ahn, S.H.*, 2016, "Tool-wear monitoring during micro-end milling using wavelet packet transform and Fisher’s linear discriminant," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 17, No. 7, pp. 845-855, July (SCI(E), IF 1.075, DOI: 10.1007/s12541-016-0103-z, ISSN: 2234-7593, JCR Impact Factor Rank: 67/132 (2015) in ENGINEERING, MECHANICAL).
[4] Bhandari, B., Hong, Y.S., Yoon, H.S., Moon, J.S., Pham, M.Q., Lee, G. B., Huang, Y. Linke, B. S., Dornfeld, D. A., Ahn, S.H., 2014, "Development of a Micro-Drilling Burr-Control Chart for PCB Drilling," Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, Elsevier Science Inc. (USA), Vol. 38, No. 1, pp. 221-229, January (SCI(E), IF 1.403, DOI: 10.1016/j.precisioneng.2013.07.010, ISSN: 0141-6359, JCR Impact Factor Rank: 23/87 (2013) in ENGINEERING, MULTIDISCIPLINARY).
[3] Hong, Y.S., Ahn, S.H., Song, Chulki and Cho, Youngman*, 2011, "Component-level Fault Diagnostics of a Bevel Gear using a Wavelet Packet Transform," Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 225, Number 1, February / 2011 (SCI, IF 0.432, DOI: 10.1177/2041300910393428, ISSN: 0954-4089 (Print) 2041-3009 (Online)), One of the top downloaded articles in 2011 in this journal.
[2] Hameed, Z., Hong, Y.S., Cho, Youngman, Ahn, S.H.*, and Song, Chulki, 2009, "Condition Monitoring and Fault Detection Systems of Wind Turbines and Related Algorithms: A Review ," Journal of Renewable & Sustainable Energy Reviews, Volume 13 No. 1, page 1-39, January (SCI), IF 4.075, Citation by Google Scholar 391).
[1] Lee, J.C., Hong, Y.S., Nan, Ri-Guang, Jang, Moon-Kyu, Lee, Caroline Sunyong, Ahn, S.H., and Kang, Yeon-Jun*, 2008, "Soundproofing Effect of Nano Particle Reinforced Polymer Composites," Journal of Mechanical Science and Technology, Springer, Vol. 22, pp. 1468-1474, April (SCIE, IF 0.258, DOI: 10.1007/s12206-008-0419-4, ISSN:1738-494X).
CATEGORY : INTERNATIONAL CONFERENCE
[11] Yoon, H.S., Hong, Y.S., Bhandari, B., Moon, J.S., and Ahn, S.H., 2011, "Energy Saving in Micro-drilling for PCB Manufacturing by Controlling Drilling Conditions," Asian Symposium for Precision Engineering and Nanotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 16-18, Hong Kong.
[10] Bhandari, B., Hong, Y.S., Yoon, H.S., Lee, J.C., Moon, J.S., David A. Dornfeld, Barbara S. Linke, Yu-Chu Huang, Gyu-Bong Lee, Ahn, S.H., 2011, "Development of micro drilling burr control chart based on Taguchi methods for PCB drilling," Asian Symposium for Precision Engineering and Nanotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 16-18, Hong Kong, Best Paper Award.
[9] Young Man Cho, Hong, Y.S., Kyung-Seok Lee, Yoon, H.S., Moon, J.S., Han-Uk Choi, and Ahn, S.H., 2011, "Condition monitoring for gearbox of wind power generation system using wavelet packet transform," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Korean Society of Precision Engineering and Manufacturing (KSPE) and etc., October 6-7, Seoul National University, Seoul, KOREA.
[8] Barbara S. Linke, Yoon, H.S., Hong, Y.S., Bhandari, B., Moon, J.S., and Ahn, S.H., 2011, "Energy Efficient Drilling for PCB Manufacturing Considering Lead Time," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Korean Society of Precision Engineering and Manufacturing (KSPE) and etc., October 6-7, Seoul National University, Seoul, KOREA.
[7] Ahn, S.H.*, Hong, Y.S., Lee, J.C., Yoon, H.S., Lee, K.E., Moon, J.S. and Tae-Mu Lee, 2011, "Improvement of tool life of micro drill-bits for PCB manufacturing," MicroManufacturing Conference & Exhibits, Society of Manufacturing Engineers (SME), April 5-6, Oakbrook Terrace, IL, USA.
[6] Lee, G.Y., Wie, K.H., Hong, Y.S., Yoon, H.S., Kim, M.H., Kim, H.J., Ahn, S.H.*, 2010, "A Study of Tool Pattern Design for Calcified-Atherosclerotic-Plaque Removal Robot," The third IEEE RAS / EMBS International Conference on Biomedical Robotics and Biomechatronics (IEEE BioRob 2010), Institute of Electrical and Electronics Engineers Robotics and Automation / Engineering, Medicine, and Biology (IEEE RAS / EMBS), September 26-29, Tokyo, Japan.
[5] Kim, J.W., Hong, Y.S., Ahn, S.H.*, 2009, "Effect of repeated interference fit in tolerance of micro scale pin-hole assembly," 4th International Manufacturing Science and Engineering Conference(MSEC 2009), American Society of Mechanical Engineers (ASME), October 4-7, West Lafayette, IN, USA.
[4] Hong, Y.S., Lee, G.Y., Cho, Youngman*,Song, Chulki and Ahn, S.H.*, 2009, "Evaluation of Diagnostic Performance for the gear box Considering the Measurement Position Effect with Wavelet Packet Transform," 4th International Manufacturing Science and Engineering Conference(MSEC 2009), American Society of Mechanical Engineers (ASME), October 4-7, West Lafayette, IN, USA, (accepted).
[3] Wie, K.H., Kim, H.J., Hong, Y.S., and Ahn, S.H.*, 2009, "Agent-based micro machining system with cusp-height-minimized tool sequence," The 29th Computers and Information in Engineering Conference (IDETC/CIE 2009), American Society of Mechanical Engineers (ASME), August 30 - September 2, San Diego, California, USA.
[2] Chun, D.M., Kim, M.H., Yeo, J.C., Hong, Y.S., Park, J.B. and Ahn, S.H.*, 2008, "MICRO ROBOT FOR CARDIOVASCULAR TREATMENT: STUDY ON CHRONIC TOTAL OCCLUSION (CTO) ," The 39th International Symposium on Robotics (ISR 2008), Institute of Control, Robotics and Systems & International Federation of Robotics, October 15-17, COEX, Seoul, Korea.
[1] Park, J.B., Hong, Y.S., Kim, J.W., Yeo, J.C., Lee, K.T., Park, J. S., Cho, Youngman* and Ahn, S.H.*, 2008, "Wear signal measurement of micro-end mill using wavelet analysis ," 2008 International Manufacturing Science And Engineering Conference, America Society of Mechanical Engineers (ASME), October 7-10, Evanston, Illinois, USA.
CATEGORY : DOMESTIC CONFERENCE
[8] 홍영선, 이종천, 문종설, 안성훈, 2011, "마이크로 드릴의 절삭조건과 소재에 의한 PCB 가공특성(Effect of machining conditions and bit materials of micro drill on PCB machining characteristics)," 한국정밀공학회 2011년도 춘계학술대회, 한국정밀공학회, 6월 1~3일, 라마다프라자제주호텔, 제주.
[7] 윤해성, 홍영선, Binayak Bhandari, 문종설, 안성훈*, 2011, "PCB 가공공정에서 드릴링 가공 조건 변화를 이용한 에너지 절감 전략," 한국기계가공학회 춘계학술대회, 한국기계가공학회, 6월 16~17일, 부경대학교, 부산.
[6] 이경태, 홍영선, 김진웅, 여준철, Jae-Seok Park, 안성훈*, 2009, "PCB 가공을 위한 마이크로 엔드밀의 유한 요소 해석 모델에 관한 연구," 대한기계학회 마이크로/나노공학부문 춘계학술대회, 대한기계학회, 5월 28~29일, 서울대학교 정밀기계설계 공동연구소, 서울.
[5] 김범수,홍영선,임원식,차석원, 안성훈*, 장재덕, 2009, "클러치 슬립제어를 위한 제어 전략 방법에 대한 연구," 한국 자동차 공학회 춘계 학술대회, 한국 자동차 공학회, 4월 29일~5월 1일, 라마다 프라자 호텔, 제주.
[4] 김진웅, 박정빈, 홍영선, 박재석, 조영만*, 안성훈*, 2009, "웨이블릿 분석을 이용한 마이크로 앤드밀의 마모 측정," 2009년 한국CAD/CAM학회 학술발표회, 한국CAD/CAM학회, 2월 4~6일, 한화리조트 휘닉스파크, 강원도 평창.
[3] 김민형, 천두만, 여준철, 홍영선, 박정빈, 안성훈*, 박종하, 류새희, 이선영, 2008, "관상동맥 내 CTO(Chronic Total Occlusion) 제거를 위한 드릴 툴 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 11~13일, 제주컨벤션센터, 제주.
[2] 자파르, 홍영선, 안성훈*, Cho, Youngman and Song, Chulki, 2007, "풍력발전기의 상태모니터링 시스템," 2007년도 신재생에너지 학회 춘계학술발표, 한국 신재생 에너지학회, 4월 21~22, 제주 라마다 호텔, 제주도..
[1] 이재철, 홍영선, 박소희, 강연준, 안성훈, 2006, "ABS/나노 탄소 입자 복합재의 방음 효과," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 18~20일, 라마다프라자호텔, 제주, 최우수상(포스터발표).
CATEGORY : THESIS
[1] Hong, Y.S., 2011, "Tool wear monitoring of micro end mill using wavelet packet transform and hidden Markov model," Ph. D. Thesis, Seoul National University..
CATEGORY : PATENT
[2] 추원식, 이재철, 김형중, 천두만, 홍영선, 김충수, 이길용, 여준철, 안성훈, 2008, "체내삽입형 약물방출장치 및 이를 이용한 약물방출 제어시스템 (Implantable Drug Release Apparatus and Drug Delivery Control System using the Same)," 출원번호: 10-2008-0057191, 출원일: 2008.06.18, 10-1512514, 2015.04.09 등록.
[1] 안성훈, 여준철, 홍영선, 이경태, 2007, "RFID를 이용한 차량의 주기성 소모품 관리방법," 출원번호: 10-2007-0093697, 출원일: 2007.09.14.
CATEGORY : HONORS/AWARDS
[2] Bhandari, B., Hong, Y.S., Yoon, H.S., Lee, J.C., Moon, J.S., David A. Dornfeld, Barbara S. Linke, Yu-Chu Huang, Gyu-Bong Lee, Ahn, S.H., 2011, "Best Paper Award, Development of micro drilling burr control chart based on Taguchi methods for PCB drilling," Asian Symposium for Precision Engineering and Naotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 17, Hong Kong, Best Paper Award.
[1] Lee, J.C., Hong, Y.S., 박소희, 강연준, Ahn, S.H., 2006, "포스터 발표 최우수상 - ABS/나노 탄소 입자 복합재의 방음 효과," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 18~20일, 라마다프라자호텔, 제주.