IDIM Member Publications
Jin-Woong Kim


CATEGORY : INTERNATIONAL JOURNAL
[2] Kim, J.W., Yoon, H.S., and Ahn, S.H., 2013, "Effect of Repeated Insertions into a Mesoscale Pinhole Assembly: Case of Interference Fit," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 14, No. 9, pp. 1651-1654, September (SCI(E), IF 1.585, DOI: 10.1007/s12541-013-0223-7, ISSN: 2234-7593, JCR Impact Factor Rank: 25/125 (2012) 33/128 (2013) in ENGINEERING, MECHANICAL).
[1] Kim, J.W., Yoon, H.S., Lee, H.S., Lee, K.E., and Ahn, S.H., 2013, "Defects of Wave Patterns from Tungsten Carbide/Stainless Steel Brazed Micro-end-milling for Printed Circuit Board Machining," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE publication ltd (England), Vol. 227, No. 11, pp. 1743-1747, November (SCI, IF 0.770, DOI: 10.1177/0954405413491242, ISSN: 0954-4054, JCR Impact Rank: 63/125 (2012) 81/128 (2013) in ENGINEERING, MECHANICAL).
CATEGORY : INTERNATIONAL CONFERENCE
[5] Kim, J.W., Hong, Y.S., Ahn, S.H.*, 2009, "Effect of repeated interference fit in tolerance of micro scale pin-hole assembly," 4th International Manufacturing Science and Engineering Conference(MSEC 2009), American Society of Mechanical Engineers (ASME), October 4-7, West Lafayette, IN, USA.
[4] Kim, J.W. and Ahn, S.H., 2009, "Effect of repeated interference fit in micro scale pin-hole assembly," 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology, 11-13 November 2009, Station Hotel Kokura, Kitakyushu, Japan.
[3] Lee, K.E.,Kim, J.W.,C.Y.Park, and Ahn, S.H., 2009, "Development of microtorque measurement device using strain gauge," IEEE International Symposium of Assembly and Manufacturing,17-20 November 2009, Hotel Ramada,Seoul, Korea.
[2] Kim, J.W. and Ahn, S.H., 2009, "Effect of repetition in micro scale pin-hole interference fit," IEEE International Symposium on Assembly and Manufacturing, 17-20 November 2009, Hotel Ramada, Seoul, Korea.
[1] Park, J.B., Hong, Y.S., Kim, J.W., Yeo, J.C., Lee, K.T., Park, J. S., Cho, Youngman* and Ahn, S.H.*, 2008, "Wear signal measurement of micro-end mill using wavelet analysis ," 2008 International Manufacturing Science And Engineering Conference, America Society of Mechanical Engineers (ASME), October 7-10, Evanston, Illinois, USA.
CATEGORY : DOMESTIC CONFERENCE
[4] 이경태, 홍영선, 김진웅, 여준철, Jae-Seok Park, 안성훈*, 2009, "PCB 가공을 위한 마이크로 엔드밀의 유한 요소 해석 모델에 관한 연구," 대한기계학회 마이크로/나노공학부문 춘계학술대회, 대한기계학회, 5월 28~29일, 서울대학교 정밀기계설계 공동연구소, 서울.
[3] 이경은, 안성훈, 김진웅, 이희신, 2009, "브레이징으로 접합된 마이크로 엔드밀의 진동특성 평가," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 28~30일, 경주교육문화회관, 대구EXCO, 대구.
[2] 김진웅, 박정빈, 홍영선, 박재석, 조영만*, 안성훈*, 2009, "웨이블릿 분석을 이용한 마이크로 앤드밀의 마모 측정," 2009년 한국CAD/CAM학회 학술발표회, 한국CAD/CAM학회, 2월 4~6일, 한화리조트 휘닉스파크, 강원도 평창.
[1] 박정빈, 김진웅, 김형중, 이길용, 이경태, 박재석, 안성훈*, 2008, "실험 계획법을 이용한 PCB 가공용 마이크로 앤드밀의 수명 평가," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 11~13일, 제주컨벤션센터, 제주 .
CATEGORY : THESIS
[1] Kim, J.W., 2010, "Optimal Shape Design of a Drill Flute Using Design of Experiment," Master thesis, Seoul National University.