IDIM Member Publications
Gil-Yong Lee


CATEGORY : INTERNATIONAL JOURNAL
[14] Lee, G.Y., Kim, M., Quan, Y.J., Kim, M.S., Kim, T.J.Y., Yoon, H.S., Min, S.K., Kim D. H., Mun, J.W., Oh, J.W., Choi, I.G., Kim, C.S., Chu, W.S., Yang, J., Bhandari, B., Lee, C.M., Ihn, J.B. and Ahn, S.H., Submitted, "Machine health management in smart factory: A review," Journal of Mechanical Science and Technology.
[13] Khare, V., Sonkaria, S, Lee, G.Y., Ahn, S.H.* and Chu, W.S.* , 2017, "From 3D to 4D Printing - Design, Material Fabrication for Multi-Functional Multi-Materials," International Journal of Precision Engineering and Manufacturing-Green Technology, Springer, Vol. 4, No. 3, pp. 291-299 (SCIE, ISSN: 2288-6206, IF: 3.494, Top 10% in Manufacturing, Engineering), July 12th.
[12] Chu, W.S., Kim, M.S., Lee, K.T., Bhandari, B., Lee, G.Y., Yoon, H.S., Kim, H.S., Park, J.I., Bilegt, E., Lee, J.Y., Song, J.H., Park, G. H., Bhandari, P., Lee, C.S., Song, C. and Ahn, S.H., 2017, "Design and Performance Evaluation of Korean Traditional Heating System - Ondol: Case Study in Nepal ," Energy and Buildings, Elsevier, Vol. 138, pp. 406-414, March 1 (SCIE, IF 2.973, JCR Rank 6/124 in Engineering, Civil, ISSN 0378-7788, Updated 2/2), Top 5% in ENGINEERING, CIVIL.
[11] Park, J.I., Lee, G.Y., Kim, C.S. and Ahn, S.H., 2016, "Flexible Ceramic-Elastomer Composite Piezoelectric Energy Harvester Fabricated by Additive Manufacturing," Journal of Composite Materials.,The American Society for Composites(U.S.A)., Vol.50, No.12, pp.1573-1579.
[10] Ahn, S.H., Yoon, H.S., Jang, K.H., Kim, E.S., Lee, H.T., Kim, C.S., Lee, G.Y., Cha, S.W., 2015, "Nanoscale 3D printing process using aerodynamically focused nanoparticle (AFN) printing, micro-machining, and focused ion beam (FIB)," CIRP Annals Manufacturing Technology, Elsevier Science BV, Vol. 64, Issue 1, pp. 523-526, April (SCI(E), IF 2.541, DOI: 10.1016/j.cirp.2015.03.007, ISSN: 0007-8506, Publication date (Web): April 30, JCR Impact Factor Rank: 4/44 (2015) in ENGINEERING, INDUSTRIAL), Top 10% in ENGINEERING, INDUSTRIAL.
[9] Bhandari, B., Lee, K.T., Lee, G.Y., Cho, Y. M. and Ahn, S.H., 2015, "Optimization of Hybrid Renewable Energy Power Systems: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 2, Issue 1, pp. 99-112 (SCIE, IF 1.500, ISSN: 2234-7593, JCR Rank 13/39(33.3%, 2013) in Engineering, Manufacturing), Springer Award: Most Downloaded Article.
[8] Lee, G.Y., Park, J.I., Kim, C.S., Yoon, H.S., Jinkyu Yang, and Ahn, S.H., 2014, "Aerodynamically Focused Nanoparticle (AFN) Printing: Novel Direct Printing Technique of Solvent-free and Inorganic Nanoparticles," ACS Applied Materials and Interfaces, American Chemical Society (USA), Vol. 6, No. 19, pp. 16466-16471, September (SCI, IF 5.900, DOI: 10.1021/am504304g, ISSN: 1944-8244, Publication date (Web): September 11, 2014, JCR Impact Factor Rank: 26/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY), IF 5.900.
[7] Chun, D.M., Gaasuren Davaasuren, Chi-Vinh Ngo, Kim, C.S., Lee, G.Y., Ahn, S.H., 2014, "Fabrication of Transparent Superhydrophobic Surface on Thermoplastic Polymer using Laser Beam Machining and Compression Molding for Mass Production," CIRP Annals Manufacturing Technology, Technische Rundschau Edition Colibri Ltd. (Switzerland), Vol. 63, Issue 1, pp. 525-528 (SCIE).
[6] Chun, D.M., Kim, C.S., Choi, J.O.,Lee, G.Y. and Ahn, S.H., 2014, "Multi-layer Deposition of Ceramic and Metal at Room Temperature using Nano-Particle Deposition System (NPDS) and Planarization Process," International Journal of Advanced Manufacturing Technology, Springer, Vol. 72, No. 1, PP. 41-46 (SCI, IF 1.1, ISSN: 0268-3768).
[5] Wu, R., Han, M.W., Lee, G.Y. and Ahn, S.H., 2013, "Woven Type Smart Soft Composite Beam with In-plane Shape Retention," Smart Materials and Structures, IOP Publishing (England), Vol. 22, No. 12, 125007 (SCI, IF 2.449, DOI: 10.1088/0964-1726/22/12/125007, ISSN:1361-665X, JCR Rank 7/57 in Instruments & Instrumentation).
[4] Changhyun Pang, Lee, G.Y., Tae-il Kim, Sang Moon Kim, Hong Nam Kim, Ahn, S.H. and Kahp-Yang Suh, 2012, "A Flexible and Highly Sensitive Strain-gauge Sensor using Reversible Interlocking of Nanofibres," NATURE MATERIALS, Nature Publishing Group, advance online publication, July (SCI, I.F. 32.841, DOI:10.1038/nmat3380, ISSN : 1476-4660), I.F. 32.841, Citation by Google Scholar 74.
[3] Ahn, S.H., Choi, J.O., Kim, C.S., Lee, G.Y., Lee, H.T., Kyujin Cho, Chun, D.M., C. S. Lee, 2012, "Laser-Assisted Nano Particle Deposition System and Its Application for Dye Sensitized Solar Cell Fabrication," CIRP Annals - Manufacturing Technology, Elsevier (Netherland), Vol. 61, No. 1, pp. 575-578 (SCIE, IF 1.708), JCR Impact Factor Rank: 3/43 (2013) in ENGINEERING, INDUSTRIAL, Top 10% in ENGINEERING, INDUSTRIAL.
[2] Bhandari, B., Lee, G.Y., and Ahn, S.H., 2012, "A Review on IPMC Material as Actuators and Sensors: Fabrication, Characterization and Applications," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 13, No. 1, pp. 141-163, Jan. (SCIE, IF 1.141, DOI: 10.1007/s12541-011-0116-6, ISSN: 1229-8557, IJPEM Most Downloaded Article Award 2012.
[1] Lee, G.Y., Choi, J.O., Kim, Myeungseon and Ahn, S.H.*, 2011, "Fabrication and Reliable Implementation of an Ionic Polymer–Metal Composite (IPMC) Biaxial Bending Actuator," Smart Materials and Structures, Institute of Physics (IOP) Vol. 20, No. 10, 105026, October (SCI, IF 2.094, DOI: 10.1088/0964-1726/20/10/105026, ISSN 0964-1726, JCR Impact Factor Rank: 54/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY).
CATEGORY : DOMESTIC JOURNAL
[1] 안성훈, 이경태, Binayak Bhandari, 이길용, 이선영, 송철기, 2012, "지속가능성을 고려한 산악지역 독립망 전력 시스템의 신재생 에너지원 구성 전략," 한국정밀공학회지, 한국정밀공학회, Vol. 29, No. 9, pp. 958-963, 특집.
CATEGORY : INTERNATIONAL CONFERENCE
[45] Min, S.H., Lee, G.Y., Lee, H.T., Kim, H.J. and Ahn, S.H., 2017, "Fabrication of Piezoelectric Energy Harvester using Nano Particle Deposition System (NPDS)," International Symposium on Green Manufacturing and Applications (ISGMA2017), Korean Society for Precision Engineers (KSPE), June 27 ~ July 1, Hwabaek International Convention Center, Gyeongju, Korea.
[44] Kim, M.S., Lee, G.Y., Kim, H.S., Kim, H.J., Oh, J.W., J.B. Ihn, Ahn, S.H., 2017, "Variable Gauge Factors of Strain Sensors Printed by Aerodynamically Focused Nanoparticles Printer," International Symposium on Green Manufacturing and Applications (ISGMA2017), Korean Society for Precision Engineers (KSPE), June 27 ~ July 1, Hwabaek International Convention Center, Gyeongju, Korea..
[43] Kim, H.S., Lee, G.Y., Kim, M.S., Kim, H.J., Oh, J.W., Ihn, J.B., Ahn, S.H., 2017, "Development of Carbon Fiber-Epoxy 3D printer for Direct Composite Repair," International Symposium on Green Manufacturing and Applications (ISGMA2017), Korean Society for Precision Engineers (KSPE), June 27 ~ July 1, Hwabaek International Convention Center, Gyeongju, Korea.
[42] Lee, H.T., Lee, G.Y., and Ahn, S.H., 2017, "Actuation of Microscale Shape Memory Alloy Structure with Ion Beam Induced Heating Method," International Symposium on Green Manufacturing and Applications (ISGMA2017), Korean Society for Precision Engineers (KSPE), June 27 ~ July 1, Hwabaek International Convention Center, Gyeongju, Korea.
[41] Lee, G.Y., Kim, M.S., Yoon, H.S., Jinkyu Yang, Jeong-Beom Ihn,and Ahn, S.H. , 2017, "Direct printing of strain sensors via nanoparticle printer for the applications to composite structural health monitoring," 1st CIRP Conference on Composite Materials Parts Manufacturing (CIRP CCMPM 2017), The International Academy for Production Engineering (CIRP), June 8-9, Karlsruhe Institute of Technology (KIT), Karlsruhe, Germany.
[40] Lee, G.Y., Ahn, S.H., Kim, M.S., Lee, H.T., Yoon, H.S., 2017, "Nanoparticle 3D printer," The 7th International Conference on Manufacturing, Machine Design and Tribology, The Korean Society of Mechanicla Engineers, April 19-22, Ramada Plaza Jeju Hotel, Jeju island, Korea.
[39] Oh, J.W., Lee, G.Y., Kim, M.S., Jeong-Beom Ihn, Ahn, S.H., 2017, "Life Cycle Evaluation of Strain Sensor Printed with Silver Nanoparticles for Composite Health Monitoring," International Symposium on Green Manufacturing and Applications (ISGMA 2017), Korean Society for Precision Engineers (KSPE), June 27 ~ July 1, Hwabaek International Convention Center, Gyeongju, Korea.
[38] Ahn, S.H., Choi, J.O., Yoon, H.S., Lee, G.Y., Lee, H.T., 2016, "Direct patterning of pre-excited nanoparticles by nanosecond pulsed laser," CIRP STC S meeting, CIRP, August 25, Guimaraes, Portugal (Scientific Technical Committee meeting).
[37] Lee, G.Y., Lee, H.T., Kim, H.S., Ahn, S.H., Ryu, W., and Yang, J., 2016, "Direct Printing of Stretchable and Transparent Thin Film via Melt Electrospinning," International Symposium on Green Manufacturing and Applications (ISGMA) 2016, Korean Society of Precision Engineering and etc., June 21~25, Bali Nusa Dua Convention Center, Bali, Indonesia.
[36] Yoon, H.S., Kim, H.J., Lee, G.Y., Kim, M.S., Kim, H.S., and Ahn, S.H., 2016, "Direct printing of strain gauge sensor using nanoparticles onto carbon fiber reinforced palstic (CFRP)," The 10th Asian-Australasian Conference on Composite Materials (ACCM-10), October 16-19, Bexco, Busan, Korea.
[35] Lee, G.Y., Yoon, H.S., Kim, M.S., Yang, J., and Ahn, S.H., 2016, "Direct writing of nanoparticles via aerodynamically focused nanoparticle (AFN) printing," International Symposium on Green Manufacturing and Applications (ISGMA) 2016, Korean Society of Precision Engineering and etc., June 21~25, Bali Nusa Dua Convention Center, Bali, Indonesia.
[34] Ahn, S.H., Yoon, H.S., Jang, K.H., Kim, E.S., Lee, H.T., Lee, G.Y., Kim, C.S., Cha, Suk-Won, 2015, "Nanoscale 3D printing process using aerodynamically focused nanoparticle (AFN) printing, micro-machining, and focused ion beam (FIB)," 65th CIRP General Assembly, CIRP, August 23-29, Cape Town, South Africa, Part I presentation.
[33] Yoon, H.S., Kim, E.S., Jang, K.H., Lee, G.Y., and Ahn, S.H., 2015, "Direct Patterning of Micro Conductive Line using AFN Printing," International Symposium on Green Manufacturing and Applications (ISGMA) 2015, Korean Society of Precision Engineering and etc., June 23~27, Shangri-La Hotel, Qingdao, China.
[32] Yoon, H.S., Jang, K.H., Kim, E.S., Lee, H.T., Park, H., Kim, D.W., Kim, C.S., Lee, G.Y., Lee, K., and Ahn, S.H., 2015, "CAD/CAM and design for manufacturing (DFM) rules for novel 3D nanoscale printing process," 4th International Conference on Virtual Machining Process Technology (CIRP sponsored conference), CIRP, NSERC CANRIMT (Canadian Network for Research and Innovation in Machining Technology), June 2-5, Vancouver, Canada.
[31] Lee, G.Y., Yoon, H.S., Kim, C.S., Ahn, S.H., and Chun, D.M., 2014, "Fabrication of 3D silver structures using aerodynamically focused nanoparticle (AFN) printing," CIRP STC S meeting, CIRP, August 28, Nantes, France (Scientific Technical Committe meeting).
[30] Yoon, H.S., Lee, H.T., Kim, E.S., Jang, K.H., Bilegt, E., Lee, G.Y., Kim, C.S., and Ahn, S.H., 2014, "Micro-scale Multi-material Structure Fabricated by Aerodynamically Focused Nanoparticle (AFN) Printing," International Aerosol Conference (IAC), Korean Association for Particle and Aerosol Research, BEXCO, August 28-September 2, Busan, Korea.
[29] Chu, W.S., Kim, C.S., Lee, G.Y., and Ahn, S.H., 2013, "Hybrid Manufacturing Systems Based on 3D Printing Technology," Global 3D Tech Forum 2013, 3D Fusion Industry Association and Korea Electronics Association, Gangnam in Seoul, Korea, October 10-11.
[28] Ahn, S.H., Kim, C.S., Lee, G.Y., Chun, D.M., C. S. Lee, J. Jeong and D.-Y. Jang, 2013, "Nanostructured Surface by Nano Particle Deposition System: Method and Mechanism," 63th General Assembly in Conpenhagen, Denmark August 18-24, Part II presentation.
[27] Lee, G.Y., Chu, W.S., Lee, K.T., Bhandari, B., Kim, M.S., Kim, H.S., Park, J.I., Bilegt, E., Lee, J.Y., Yoon, H.S., Park, G.H., Min, K.W., Kang, Y.S., Song, J.H., Song, C.K., Lee, C.S., Ahn, S.H. et al., 2013, "An Optimal Design and Performance Evaluation of Korean Traditional Ondol System in Varing Gorae Geometry Application of Goguryeo Style Jjok Gudeul," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[26] Kim, C.S., Lee, G.Y., Choi, J.O., Lee, H.T., Park, J.I., Yoon, H.S., Ahn, S.H., Jang, Dong-Young, 2013, "Fabrication and Actuation of Smart Functional Nanostructure by Focused Ion Beam with 4-Axes Nanomanipulator," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[25] Lee, K.T., Bhandari, B., Chu, W.S., Lee, G.Y., Yoon, H.S., Lee, J.Y., Bilegt, E., Park, J.I., Kim, M.S., Song, J.H., C. S. Lee, C. K. Song, Ahn, S.H., et al., 2013, "Installation of off-grid hybrid power generation system and smart grid in remote mountainous village of Nepal," International Symposium on Green Manufacturing and Applications (ISGMA 2013), Korean Society for Precision Engineering (KSPE), June 26-29, Honolulu, Hawaii, USA.
[24] Ahn, S.H., Choi, J.O., Kim, C.S., Lee, G.Y., Lee, H.T., Kyujin Cho, Chun, D.M., C. S. Lee, 2012, "Laser-assisted nano particle deposition system and its application for dye sensitized solar cell fabrication," 62nd CIRP General Assembly, CIRP, August 19-25, Hong Kong, China, Part I presentation.
[23] Choi, J.O., Kim, C.S., Lee, G.Y., Lee, H.T., Lee, C.S., Ahn, S.H., 2012, "FABRICATION OF FLEXIBLE DYE SENSITIZED SOLAR CELL USING LASER ASSISTED NANO PARTICLE DEPOSITION SYSTEM," Asia-Pacific Forum on Renewable Energy 2012, 26th~29th November, 2012, Lotte Hotel, Jeju Island, Korea.
[22] Choi, J.O., Kim, C.S., Lee, G.Y., Lee, H.T., Lee, C.S., Ahn, S.H., 2012, "Influence of Laser Sintering Treatment on Flexible Dye-sensitized Solar Cell Fabricate by Nano Particle Deposition System," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Korean Society of Precision Engineering, August 27-29, Jeju, Korea..
[21] Lee, H.T., Kim, C.S., Lee, G.Y., Choi, J.O., Lee,Jiseong , Jang,Dong-Young and Ahn, S.H., 2012, "Localized Surface Polishing Process using Nanomechanical Tools," International Symposium on Green Manufacturing and Applications (ISGMA 2012),Korean Society of Precision Engineering, August, 27-29, Jeju Island, Korea..
[20] Gee-Hoon Park, Se-Jin Kim, Jin-Sol Kim, Lee, G.Y., Kim, M.S. and Ahn, S.H., 2012, "An Experimental Study on Temperature Characteristics of Korean Traditional Ondol System in Varying Gorae Geometry: Application of Goguryeo Style Jjok Gudeul," International Symposium on Green Manufacturing and Applications (ISGMA 2012), August 27-29, Jeju, Korea.
[19] Lee, G.Y., Kim, C.S., Choi, J.O., Lee, H.T. and Ahn, S.H., 2012, "Direct Pattern Writing of Tin Particles using Nano Particle Deposition System (NPDS)," International Symposium on Green Manufacturing and Applications (ISGMA 2012), August 27-29, Jeju, Korea.
[18] Kahp-Yang Suh*, Changhyun Pang, Lee, G.Y., Tae-il Kim, Sang Moon Kim, Hong Nam Kim, Ahn, S.H., Chanseok Lee, Daeshik Kang and Won Gyu Bae, 2012, "Bio-inspired reversible mechanical interlocking of nanofibers for skin-attachable sensors," EU-Korea Conference on Science and Technology (EKC2012), Korean Scientists and Engineers Association Germany (VeKNI) and the Korean Federation of Science and Technology Societies (KOFST), July 26-28, Estrel Hotel, Berlin, Germany.
[17] Kim, K.S., Lee, J.W., Lee, G.Y., Kim, C.S., Choi, J.O., Lee, H.T., Ahn, S.H. and Lee, C.S., 2012, "Noble fabrication of TiO2 working electrode using Laser-assisted Nano Particle Deposition System (La-NPDS)," 2012 MRS Spring meeting, April 9-13, San Francisco, CA, US..
[16] Ahn, S.H., Kim, C.S., Lee, G.Y., 2011, "Nanoscale 3D Printing System using Nano Particle Deposition Sustem and Focused Ion Beam," The 2nd International Symposium on Hybrid Materials and Processing.
[15] Ahn, S.H., Bhandari, B., Lee, G.Y., Lee, K.T., Yoon, H.S., Kim, D.H., Song, S.H., Moon, J.S., Sung-In Kim, Yoon-Ho Kim, Hak-Chan Kim, Sun-Kyung Yu, Won-Jong Eun, Hye-Seung Jeong and Ramesh Maskey, 2011, "Off-grid sustainable small-scale Photovoltaic (PV) project in high altitude region of Nepal," International Conference on Appropriate Technology, December 2, SNU, Seoul, Korea..
[14] Choi, J.O.,Lee, G.Y.,Kim, C.S.,Kim, D.H.,Kim, M.S.,Chun, D.M.,C.S. Lee,Ahn, S.H., 2011, "Dye-sensitized solar cell (DSSC) with TiO2 multilayer fabrication by nano particle deposition system (NPDS)," The 18th International Conference on Composite Materials (ICCM18), The Korean Society of Composite Materials (KSCM), August 21-26, 2011, ICC Jeju, Jeju island, Korea.
[13] Kim, C.S., Lee, G.Y., Ahn, S.H., 2011, "Hybrid Nanoscale Manufacturing System using Focused Ion Beam and Nanoparticle Deposition Systems," The 10th International Conference on Nanoimprint and Nanoprint Technology (NNT), October 19-21, 2011, Jeju, Korea.
[12] Bhandari, B., Lee, G.Y., D.S. Choi, J.H. Kim, Ahn, S.H., 2011, "Development of CFRP precision gantry beams for 11th Generation LCD Panel manufacturing," 18th International Conference on composite materials, August 21-26, 2011, Jeju Island, Korea.
[11] Bhandari, B., Lee, G.Y., Dong-Soo Choi, Jun-Hyun Kim, Ahn, S.H., 2011, "CFRP Gantry Beams for Energy Saving in LCD Manufacturing Motion Stage System," International Symposium on Green Manufacturing and Application 2011, October 6 Thrusday- 7 Friday 2011, Hoam Convention Center, Seoul National University, Seoul, Korea.
[10] Bhandari, B., Lee, G.Y., Lee, K.T., Yoon, H.S., Kim, D.H., Song, S.H., Moon, J.S., Ramesh K. Maskey, Ahn, S.H., 2011, "Off-grid sustainable small-scale Photovoltaic (PV) project in high altitude region of Nepal," Addressing Climate Change For Sustainable Development Through Up-Scaling Renewable Energy Technologies, October 12-14, Kathmandu, Nepal.
[9] Ramesh Maskey, Bhandari, B., Lee, G.Y., Lee, K.T., Yoon, H.S., Kim, D.H., Song, S.H., Moon, J.S., Sung-In Kim, Yoon-Ho Kim, Hak-Chan Kim, Sun-Kyung Yu, Won-Jong Eun, Hye-Seung Jeong, and Ahn, S.H., 2011, "Solar Generating System Installation and a Study on the Efficiency Monitoring in High Altitude Village in Nepal," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Korean Society of Precision Engineering and Manufacturing (KSPE) and etc., October 6-7, Seoul National University, Seoul, KOREA.
[8] Chun, D.M., Choi, J.O., Lee, G.Y., Ahn, S.H.*, 2011, "Fabrication of semi-conductive oxide layer on polymer substrate for dye-sensitized solar cell using nano particle deposition system and laser treatment," International Symposium on Green Manufacturing and Applications (ISGMA 2011) October 6~7, 2011 Seoul National University, Seoul, KOREA.
[7] Kim, C.S., Kim, H.J., Lee, G.Y., Kim, D.H., Choi, J.O., Dong-Young Jang and Ahn, S.H., 2011, "Design for Nanomanufacturing (DFnM) of Focused Ion Beam (FIB) Process," Tsinghua University, June 7-8, Beijing, China, Excellent Poster Award.
[6] Kim, C.S., Chun, D.M., Choi, J.O., Lee, G.Y., Kim, D.H., and Ahn, S.H., 2011, "Characterization of Room Temperature Nanoparticle Deposition on Patterned Substrate," The 2nd International Symposium on Hybrid Materials and Processing (HyMap 2011), National Core Research Center for Hybrid Materials Solution, Pusan National University, Busan, Korea ,October 27-29, Busan, Korea .
[5] Lee, K.T., Lee, G.Y., Choi, J.O., Wu, R., Ahn, S.H.*, 2010, "Design and Fabrication of a Smart Flexible Structure using Shape Memory Alloy Wire (SMA)," The third IEEE RAS / EMBS International Conference on Biomedical Robotics and Biomechatronics (IEEE BioRob 2010), Institute of Electrical and Electronics Engineers Robotics and Automation / Engineering, Medicine, and Biology (IEEE RAS / EMBS), September 26-29, Tokyo, Japan.
[4] Lee, G.Y., Choi, J.O., Ahn, S.H.*, 2010, "Ionic Polymer-Metal Composite (IPMC) soft morphing actuator," The International Symposium on Nature-Inspired Technology 2010 (ISNIT 2010), October 14-15, Seoul National University, Korea.
[3] Lee, G.Y., Wie, K.H., Hong, Y.S., Yoon, H.S., Kim, M.H., Kim, H.J., Ahn, S.H.*, 2010, "A Study of Tool Pattern Design for Calcified-Atherosclerotic-Plaque Removal Robot," The third IEEE RAS / EMBS International Conference on Biomedical Robotics and Biomechatronics (IEEE BioRob 2010), Institute of Electrical and Electronics Engineers Robotics and Automation / Engineering, Medicine, and Biology (IEEE RAS / EMBS), September 26-29, Tokyo, Japan.
[2] Kim, H.J., Kim, J.S., Yoon, H.S., Lee, G.Y., Choi, J.O., and Ahn, S.H.*, 2010, "Design of Soft Morphing Structures Made of Flexible Polymers and Shape Memory Alloy Actuators," 2010 Asian Conference on Design & Digital Engineering, Society of CAD/CAM Engineers, August 26-27, Jeju Island, Korea.
[1] Hong, Y.S., Lee, G.Y., Cho, Youngman*,Song, Chulki and Ahn, S.H.*, 2009, "Evaluation of Diagnostic Performance for the gear box Considering the Measurement Position Effect with Wavelet Packet Transform," 4th International Manufacturing Science and Engineering Conference(MSEC 2009), American Society of Mechanical Engineers (ASME), October 4-7, West Lafayette, IN, USA, (accepted).
CATEGORY : DOMESTIC CONFERENCE
[34] 이현택, 안성훈, 이길용, 2016, "이온빔 가열방식을 이용한 형상기억합금의 마이크로스케일 구동," 한국정밀공학회 2016추계학술대회, 한국정밀공학회, 10월26일~10월28일, 디오션리조트호텔, 여수.
[33] 민수홍, 이길용, 양진규 and 안성훈, 2016, "전기방사법을 이용한 나노스케일 압전 섬유 소자 제작," 한국정밀공학회 추계학술대회, 한국 정밀공학회, 10월 26~28일, 여수 디오션리조트, 여수.
[32] 김은섭,안성훈,윤해성, 이길용, 2015, "공기역학적 나노입자 집속 인쇄공정으로 실리콘 기판에 적층된 은 나노입자의 적층 특성," 한국정밀공학회 추계학술대회, 한국정밀공학회, 12월 16~18일, 하이원리조트 컨벤션호텔, 강원도 정선.
[31] 윤해성, 장기환, 김은섭, 이현택, 박현서, 김대욱, 김충수, 이길용, 이건우, 안성훈, 2015, "AFN printing과 FIB를 사용하는 나노스케일 3차원 프린팅 공정용 통합 CAD/CAM," 한국 CAD/CAM학회 동계학술대회, 한국 CAD/CAM학회, 2월 4일~6일, 휘닉스파크, 평창.
[30] 윤해성, 안성훈, 장기환, 김은섭, 이현택, 이길용, 김충수, 2014, "3차원 프린팅을 이용한 마이크로 축전기의 제작," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 29~31일, 창원 CECO(창원컨벤션센터), 창원.
[29] 김은섭, 안성훈, 윤해성, 이현택, 이길용, 2014, "AFN Printing을 이용하여 적층된 마이크로 구조물의 접착력 평가방법 개발," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 29~30일, 창원 CECO(창원컨벤션센터), 창원.
[28] 장기환, 안성훈, 윤해성, 김은섭, 이현택, 김충수, 이길용, 2014, "나노스케일 3차원 프린팅 시스템을 이용한 열 구동기 제작," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 29~31일, 창원 CECO(창원컨벤션센터), 창원.
[27] 송지현, 안성훈, 윤해성, 이길용, 이현택, 2014, "AFN Printing을 이용하여 제작한 다중 은 팁 정전구동기의 활용," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 29~31일, 창원 CECO(창원컨벤션센터), 창원.
[26] 최정오, 김충수, 이길용, 이현택, 안성훈, 2014, "레이저 이용 나노 입자 적층 시스템으로 제작한 유연기판 염료 감응 태양전지의 효율 향상에 대한 연구," 나노 임프린트·몰딩·프린트 학술대회, 2월 13일, 연세대학교, 서울.
[25] 송지현, 안성훈, 윤해성, 이길용, 이현택, 2014, "펄스 방식 나노 입자 적층 시스템을 이용한 정전 구동기의 제작," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 14~16일, 제주 라마다프라자제주호텔, 제주.
[24] 이현택, 김충수, 이길용, 윤해성, 최정오, 장기환, 안성훈, 2014, "나노스케일 3차원 프린팅 시스템을 이용하여 제작된 은 마이크로 구조물의 실시간 기계적 물성 평가," 나노 임프린트.몰팅.프린트 학술대회, 2월 13일, 연세대학교, 서울, Best Poster Award.
[23] 이현택, 이길용, 김충수, 최정오, 박재일, 송지현, 장기환, 이건우, 안성훈, 2014, "나노스케일 3차원 프린팅 시스템," 한국CAD/CAM학회 학술발표회, 한국CAD/CAM 학회, 2월 12~14일, 휘닉스파크, 평창.
[22] 이길용, 안성훈, 김충수, 최정오, 윤해성, 이현택, 박재일, 2013, "펄스 방식 나노 입자 적층 시스템을 이용한 전도성 은 도선의 직접 인쇄," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 30일~ 11월 1일, BEXCO, 부산.
[21] 박재일, 안성훈, 이길용, 김충수, 최정오, 이현택, 2013, "압전성 에너지 하베스팅을 위한 세라믹 입자-탄성중합체 복합재의 수치적 모델링," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 30일~ 11월 1일, BEXCO, 부산..
[20] 이현택, 안성훈, 김충수, 이길용, 최정오, 박재일, 장기환, 2013, "나노스케일 3차원 프린팅 시스템을 이용하여 제작된 마이크로 형상의 실시간 물성 평가," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 30일~ 11월 1일, BEXCO, 부산.
[19] 최정오, 안성훈, 김충수, 이길용, 이현택, 박재일, 이선영, 2013, "나노입자 적층 시스템을 사용한 다층 구조 염료 감응형 태양전지의 제작 및 효율에 대한 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 29~31일, 라마다프라자호텔, 제주.
[18] 박재일, 안성훈, 이길용, 김충수, 윤해성, 최정오, 이현택, 2013, "세라믹 나노입자-탄성중합체 복합재를 이용한 에너지 하베스팅 장치의 제작," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 29~31일, 제주 라마다프라자제주호텔, 제주.
[17] 김충수, 최정오, 이길용, 이현택, 박재일, 지텐드라, Jang, Dong-Young, 이선영, Lee, Kunwoo, 안성훈, 2013, " 나노입자적층시스템의 나노가공공정의 응용 ," 한국생산제조시스템학회 춘계학술대회, 한국생산제조시스템학회, 4월 24~26일, BEXCO, 부산.
[16] 안성훈, 이건우, 이선영, 김충수, 이길용, 최정오, 윤해성, 이현택, 박재일, 2012, "나노스케일 3차원 프린팅 시스템 ," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원, 광주.
[15] 김충수, 안성훈, 최정오, 이길용, 윤해성, 이현택, 박재일, 이지성, 장동영, 2012, "집속이온빔과 나노입자적층시스템을 사용한 금속나노 홈의 제작과 계면 분석 ," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원, 광주.
[14] 이길용, 김충수, 최정오, 윤해성, 이현택, 박재일, 2012, "나노입자적층 시스템을 이용한 상온 다종재료 프린팅," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원, 광주.
[13] 최정오, 안성훈, 김충수, 이길용, 이현택, 박재일, 이선영, 2012, "레이저 이용 나노입자적층 장치를 사용한 플렉시블 염료 감응형 태양전지의 제작," 한국정밀공학회 2012년도 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원 오룡관, 광주.
[12] 최정오, 안성훈, 이길용, 김충수, 김동현, 이현택, 박재일, 이선영, 2012, "나노 입자 적층 시스템과 UV 레이저를 이용한 염료감응형 태양전지의 제작과 효율 향상에 대한 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 30일 ~ 6월 1일, 대전 컨벤션 센터, 대전.
[11] 김충수, 안성훈, 이길용, 최정오, 장동영, 2011, "하이브리드 제조공정을 이용한 다종재료의 3차원 나노구조 제작에 관한 연구," 한국정밀공학회 2011년도 추계학술대회.
[10] 이길용, Binayak Bhandari, 이경태, 김동현, 윤해성, 문종설, 송성혁, 안성훈, 2011, "네팔 고산지역 태양전지 발전시스템 설치 지원," 한국정밀공학회 2011 추계학술대회, 한국정밀공학회, 10월 26일-28일, 경주교육문화회관, 경주.
[9] Binayak Bhandari, 이길용, Dong-Soo Choi, Jun-Hyun Kim, 안성훈, 2011, "CFRP composite gantry beams for energy and weight saving," 한국정밀공학회 2011년도 춘계학술대회.
[8] 김충수, 안성훈, 이길용, 김형중, 최정오, 김동현 and Jang, D. Y., 2011, "이온빔 조사 경로에 따른 집속이온빔 가공공정의 효율 평가," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 라마다 프라자 제주 호텔, 제주.
[7] 이길용, 오인철, 안성훈*, 2010, "형상기억합금과 유리섬유강화플라스틱을 이용한 지능 구조의 설계 및 제작," 한국복합재료학회 추계학술대회, 한국복합재료학회, 10월 22일, 100주년 기념관, 서울과학기술대학교, 서울.
[6] 이길용, Binayak Bhandari, 이재철, 김명섭, 최동수, 김준현, 안성훈*, 2010, "정밀 스테이지의 탄소섬유강화플라스틱 갠트리 크로스빔의 설계에 관한 연구," 한국복합재료학회 추계학술대회, 한국복합재료학회, 10월 22일, 100주년 기념관, 서울과학기술대학교, 서울.
[5] 이길용, 김지수, 김명선, and 안성훈*, 2010, "이온교환 고분자-금속 복합재를 이용한 지능형 구동기의 설계 및 제작에 관한 연구," 2010년 한국CAD/CAM학회 학술발표회, 한국CAD/CAM학회 , 1월 27~29일, 한화리조트 컨벤션 센터, 평창.
[4] 이길용, 김지수, 안성훈*, 2009, "이온교환 고분자-금속 복합재 구동기를 이용한 마이크로 로봇의 설계에 관한 연구," 대한기계학회 마이크로/나노공학부문 춘계학술대회, 대한기계학회, 5월 28~29일, 서울대학교 정밀기계설계 공동연구소, 서울.
[3] 박정빈, 김진웅, 김형중, 이길용, 이경태, 박재석, 안성훈*, 2008, "실험 계획법을 이용한 PCB 가공용 마이크로 앤드밀의 수명 평가," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 11~13일, 제주컨벤션센터, 제주 .
[2] 김윤미, 김민생, 이재철, Adrian, 얀준, 이길용, 안성훈*, 2008, "NiTi 형상기억합금 wire의 거동해석," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 6월 11~13일, 제주컨벤션센터, 제주.
[1] 김충수, 최정오, 이길용, 이현택, 박재일, 지텐드라, Jang, Dong-Young, 이선영, Lee, Kunwoo, 안성훈, , " 나노입자적층시스템의 나노가공공정의 응용 ," 한국생산제조시스템학회 춘계학술대회, 한국샌산제조시스템학회, 4월 24~26일, BEXCO, 부산.
CATEGORY : THESIS
[1] Lee, G.Y., 2013, "Multi-material direct printing by pulsed-nano particle deposition system (P-NPDS)," Ph.D thesis, Seoul National University.
CATEGORY : INVITED PRESENTATION
[7] Ahn, S.H., Lee, H.T., Wang, W., Chu, W.S., Lee, G.Y., Kim, H.S., Song, S.H., Li, T., Kim, M.S., 2017, "3D/4D 프린팅을 이용한 자유형상 제작(Fabrication of Freeform Parts Using 3D/4D Printing)," 제 27회 광기술 워크샵- KIST 강릉분원, 4월 21일.
[6] Ahn, S.H., Caroline S. Lee, Kim, C.S., Lee, G.Y., 2013, "Nano-scale 3D Printing," Korea-American Scientists and Engineers Association, Northwest Regional Conference on Boi-Nano, Information-Communications, and Energy-Transportation Technology, Alder Commons, University of Washington, September 21.
[5] Ahn, S.H., Chun, D.M., Choi, J.O., Kim, C.S., Lee, G.Y., Lee, H.T., K. J. Cho, C. S. Lee, 2012, "Nano Particle Deposition System (NPDS) and Its Applications to Energy Devices," International Symposium on Green Manufacturing and Applications 2012, Jeju, Korea, August 28, Keynote speech.
[4] Ahn, S.H., Lee, G.Y., Yan, J., Kim, M.S., Bhandari, B., and Pandey, J.K., 2012, "탄소기반 복합재의 기능성 부여 및 응용," 현대자동차 중앙연구소, 의왕, 4월 9일.
[3] Ahn, S.H., Kim, C.S., and Lee, G.Y., 2011, "Nanoscale 3D printing system using nano particle deposition system and focused ion beam," The 2nd International Symposium of Hybrid Materials and Processing, Grand Hotel, HaeunDae, Busan, Korea, Oct. 27~29, Invited Speaker of the Conference.
[2] Ahn, S.H., Lee, G.Y., Lee, K.T., Kim, H.J., Jung, B.S., Kim, M.S., Choi, J.O., Wu, R., Kim, J.S., Yoon, H.S., 2010, "Design and Manufacturing Process of Soft Morphing Structures," Agency for Defence Development, Yuseong, Daejeon, Korea, September 15.
[1] Ahn, S.H., Lee, G.Y., Lee, K.T., Wu, R., and Choi, J.O. , 2010, "Manufacturing Process of Softmorphing Structures- Application of 3D Printing," CRIM Lab, ARTS Lab and IIT Center, Scuola Superiore Sant'Anna, Potendero, Italy, 8/24.
CATEGORY : PATENT
[19] 이길용, 안성훈, 2014, "Apparatus and Method of Transferring, Focusing and Purging of Powder for Direct Printing at Low Temperature ," USA, 출원번호: 14177309, 출원일: 2014.02.11, USA, No.2015/0174909, 등록일: Jun. 25, 2015.
[18] 안성훈, 김형중, 이길용, 이경태, 오인철, 김지수, 송성혁, 2014, "Smart Soft Composite Actuator," 출원번호 : 14/346,682 (미국 출원), 출원일 : 2014.03.21, USA.
[17] 안성훈, 김형중, 이길용, 이경태, 오인철, 김지수, 송성혁, 2014, "Smart Soft Composite Actuator," 출원번호 : 201280046158.1 (중국 출원), 출원일 : 2014.03.21, China.
[16] 안성훈,이길용, 2013, "저온 직접 인쇄용 분말의 이송, 집속 및 퍼징 장치 및 방법," 출원번호: 10-2013-0162573, 출원일: 2013.12.24, 등록번호: 10-1538443, 등록일: 2015.07.15.
[15] 안성훈, 이길용, 2013, "저온 직접 인쇄용 분말의 이송, 집속 및 퍼징 장치 및 방법 (Appartus and Method of Transferring, Focusing and Purging of Power for Direct Printing at Low Temperature)," (미국 출원) 출원번호: 2014-177309, 출원일: 2014.02.11 등록번호:US 2015/0174909 A1, 등록일: 2015.06.25.
[14] 안성훈, 이길용, 위경훈, 2013, "유체 내 침투 가능한 이동 로봇," 출원번호 10-2011-0036561, 출원일 : 2011.04.20, 10-1315893 등록일 : 2013.10.01.
[13] 안성훈, 김형중, 송성혁, 한민우, 이길용, 2012, "Underwater Robot based on Flapping," 출원번호: US 13/530,723, 출원일: 2012.06.22, 미국등록번호: 9,168,989, 등록일: 2015.10.27.
[12] 안성훈, 김형중, 이길용, 이경태, 오인철, 김지수, 송성혁, 2012, "Smart Soft Composite Actuator," 출원번호: PCT/KR2012/000603, 출원일: 2012.01.25.
[11] 안성훈, 김형중, 송성혁, 한민우, 이길용, 2012, "플래핑 기반 수중 로봇 (Underwater Robot based on Flapping)," 출원번호: 10-2012-0057263, 출원일: 2012.05.30, 1013768770000, 등록일: 2014.03.14.
[10] 안성훈, 이길용, 위경훈, 2011, "Mobile robot capable of being immersed in a fluid," 출원번호: PCT/KR2011/002820, 출원일: 2011.04.20..
[9] 안성훈, 김형중, 이길용, 이경태, 오인철, 김지수, 송성혁, 2011, "지능형 연성 복합재 작동기," 출원번호 : 10-2011-0098619, 출원일 : 2011.09.28, 101357462, 등록일: 2014.01.23.
[8] 안성훈, 이길용, 위경훈, 2010, "Robot for removing impurities by moving in pipe," 출원 번호: PCT/KR2010/003372, 출원일: 2010.04.20.
[7] 안성훈, 이길용, 김형중, 최정오, 2010, "전기활성고분자 구동기와 이의 제조 방법 (ELECTROACTIVE-POLYMER ACTUATOR AND METHOD FOR MANUFACTURING SAME)," 출원번호: PCT/KR2010/004201, 출원일: 2010.06.29.
[6] 안성훈, 이길용, 김형중, 최정오, 2010, "전기활성고분자 구동기와 이의 제조 방법," 출원번호: 10-2010-0061829, 출원일: 2010.06.29.
[5] 안성훈, 이길용, 위경훈, 2010, "관내를 이동하여 불순물을 제거하는 로봇," 출원번호: PCT/KR/2010/003372, 출원일: 2010.05.27.
[4] 안성훈, 이길용, 위경훈, 2010, "관내를 이동하여 불순물을 제거하는 로봇," 출원번호: 10-2010-0036403, 출원일: 2010.04.20.
[3] 안성훈, 추원식, 김민생, 김윤미, 이길용, 이재훈, 2010, "자벌레 로봇 (Inchworm Robot)," 국제출원번호 : PCT/KR2010/000825, 출원일 : 2010.02.10.
[2] 안성훈, 김선진, 이길용, 안종성, 정재욱, 2009, "골프 스윙 연습용 무선 그립 압력 감지 골프 채," 출원번호: 10-2009-0053302, 출원일: 2009.06.16.
[1] 추원식, 이재철, 김형중, 천두만, 홍영선, 김충수, 이길용, 여준철, 안성훈, 2008, "체내삽입형 약물방출장치 및 이를 이용한 약물방출 제어시스템 (Implantable Drug Release Apparatus and Drug Delivery Control System using the Same)," 출원번호: 10-2008-0057191, 출원일: 2008.06.18, 10-1512514, 2015.04.09 등록.
CATEGORY : ARTICLE
[2] 안성훈, 이현택, 왕웨이, 추원식, 이길용, 김형수, 송성혁, 이철림, 김민수, 2017, "3D/4D 프린팅을 이용한 자유형상 제작 (Fabrication of Freeform Parts Using 3D/4D Printing)," 제 27회 광기술 워크샵- KIST 강릉분원, 4월 21일.
[1] 안성훈,이길용,윤해성, 2016 SUMMER, "Micro/Nanoscale 3D printing," 서울공대 2016년 101호.
CATEGORY : HONORS/AWARDS
[8] Bhandari, B., Lee, K.T., Lee, G.Y., Cho, Y. M., and Ahn, S.H., 2016, "Most Downloaded Article Award, 2014 to 2015 - Optimization of Hybrid Renewable Energy Power Systems: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 2, No. 1, pp. 99-112, 2015.
[7] Lee, H.T., Kim, C.S., Lee, G.Y., Choi, J.O., Yoon, H.S., Jang, K.H., Ahn, S.H., 2014, "나노스케일 3차원 프린팅 시스템을 이용하여 제작된 은 마이크로 구조물의 실시간 기계적 물성 평가," 제3회 나노 임프린트·몰딩·프린트 학술대회, 2월 13일, 연세대학교, 서울, Best Poster Award.
[6] Bhandari, B., Lee, G.Y., Ahn, S.H., 2013, "IJPEM Most Downloaded Article Award 2012, "A review on IPMC material and actuators and sensors: fabrication, characterization and applications"," KSPE and Springer, International Journal of Precision Engineering and Manufacturing.
[5] Lee, G.Y., Lee, K.T., Bhandari, B., Chu, W.S., Yoon, H.S., Lee, J.Y., Bilegt, E., Park, J.I., Kim, M.S., Kim, H.S., 민경욱, 강영석, 박지훈, Song, J.H., 유은지, 김민희, 장문혁, 김범호, Maskey, A., 김형섭, 조단이, 최다현, 김동휘, 박철환, 박찬동, 한현석, 심재환, 한성길, 박지환, 조원희, 문준영, 송세용, 신현민, Bhandari, P., Ahn, S.H., Lee, C.S., 송철기, 2013, "국토교통부장관상(대상), Nepal Solar Volunteer Corps," 제5회 소외된 90%를 위한 창의설계 경진대회, 한양대학교, 한밭대학교, 한동대학교, (사)나눔과기술, 5월 24일, 한양대학교, Award from Minister of Land, Infrastructure and Transport, Korea.
[4] Choi, J.O., Kim, C.S., Lee, G.Y., Lee, H.T., Park, J.I., Lee, C.S., Ahn, S.H., 2012, "Fabrication of flexible Dye-Sensitized Solar Cell(DSSC) using Laser assisted Nano Particle Deposition System(LaNPDS)," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 24~26일, 광주과학기술원, 광주., 최우수 논문상.
[3] Lee, G.Y., 2011, "Excellent poster award," 최우수 포스터 발표상, Tsinghua University.
[2] Chun, D.M.,Choi, J.O.,Lee, G.Y.,Ahn, S.H., 2011, "Fabrication of Semi-Conductor Oxide Layer on Polymer Substrate for Eyd-Sensitized Solar Cell Using Nano Particle Deposition System and Laser Treatment," Outstanding Poster Award of Int. Symp. of Green Manufacturing and Applications 2011, Seoul National University, Korea.
[1] Bhandari, B., Lee, G.Y., Kim, M.S., Lee, J.C., Dong-Soo Choi, Jun-Hyun Kim, Ahn, S.H., 2010, "Grand Prize," Design & Fabrication of High Stiffness 8th Generation LCD Manufacturing Ultra Precision Stage System, International Research Poster Competition, Seoul National University.