IDIM Member Publications
Kyoung-Eun Lee


CATEGORY : INTERNATIONAL JOURNAL
[1] Kim, J.W., Yoon, H.S., Lee, H.S., Lee, K.E., and Ahn, S.H., 2013, "Defects of Wave Patterns from Tungsten Carbide/Stainless Steel Brazed Micro-end-milling for Printed Circuit Board Machining," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE publication ltd (England), Vol. 227, No. 11, pp. 1743-1747, November (SCI, IF 0.770, DOI: 10.1177/0954405413491242, ISSN: 0954-4054, JCR Impact Rank: 63/125 (2012) 81/128 (2013) in ENGINEERING, MECHANICAL).
CATEGORY : INTERNATIONAL CONFERENCE
[2] Ahn, S.H.*, Hong, Y.S., Lee, J.C., Yoon, H.S., Lee, K.E., Moon, J.S. and Tae-Mu Lee, 2011, "Improvement of tool life of micro drill-bits for PCB manufacturing," MicroManufacturing Conference & Exhibits, Society of Manufacturing Engineers (SME), April 5-6, Oakbrook Terrace, IL, USA.
[1] Lee, K.E.,Kim, J.W.,C.Y.Park, and Ahn, S.H., 2009, "Development of microtorque measurement device using strain gauge," IEEE International Symposium of Assembly and Manufacturing,17-20 November 2009, Hotel Ramada,Seoul, Korea.
CATEGORY : DOMESTIC CONFERENCE
[2] 이경은, 이종천, 이희신, 안성훈, 2010, "마이크로 엔드밀의 가공특성 평가 : 솔리드, 인서트, 브레이징 타입의 예," 한국정밀공학회 2010년도 추계학술대회, 한국정밀공학회, 11월 10-12일, 창원컨벤션센터, 창원.
[1] 이경은, 안성훈, 김진웅, 이희신, 2009, "브레이징으로 접합된 마이크로 엔드밀의 진동특성 평가," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 28~30일, 경주교육문화회관, 대구EXCO, 대구.
CATEGORY : THESIS
[1] Lee, K.E., 2011, "Machinability Evaluation of Micro End Mills for Printed Circuit Board : A Case Study of Solid insert and Brazing Types," Master thesis, Seoul National University.