IDIM Member Publications
Binayak Bhandari


CATEGORY : INTERNATIONAL JOURNAL
[16] Lee, G.Y., Kim, M., Quan, Y.J., Kim, M.S., Kim, T.J.Y., Yoon, H.S., Min, S.K., Kim D. H., Mun, J.W., Oh, J.W., Choi, I.G., Kim, C.S., Chu, W.S., Yang, J., Bhandari, B., Lee, C.M., Ihn, J.B. and Ahn, S.H., Submitted, "Machine health management in smart factory: A review," Journal of Mechanical Science and Technology.
[15] Lee, K.T., Bhandari, B., Kim, E.S., Kim, M.S., Poudel, S.R., Chu, W.S., Y. M. Cho, and Ahn, S.H., Submitted, "Design Guide and Cost Estimation of Micro Hydro-Solar-Wind Hybrid Renewable Energy System for off-grid villages," Renewable Energy (SCI(E), Submitted, Updated: 4/9).
[14] Chu, W.S., Kim, M.S., Lee, K.T., Bhandari, B., Lee, G.Y., Yoon, H.S., Kim, H.S., Park, J.I., Bilegt, E., Lee, J.Y., Song, J.H., Park, G. H., Bhandari, P., Lee, C.S., Song, C. and Ahn, S.H., 2017, "Design and Performance Evaluation of Korean Traditional Heating System - Ondol: Case Study in Nepal ," Energy and Buildings, Elsevier, Vol. 138, pp. 406-414, March 1 (SCIE, IF 2.973, JCR Rank 6/124 in Engineering, Civil, ISSN 0378-7788, Updated 2/2), Top 5% in ENGINEERING, CIVIL.
[13] Bhandari, B., Lee, K.T., Chu, W.S., Lee, C.S., Song, C.K., Bhandari, P. and Ahn, S.H., 2017, "Socio-Economic Impact of Renewable Energy-Based Power System in Mountainous Village of Nepal," International Journal of Precision Engineering and Manufacturing–Green Technology, Vol. 4, No. 1, January (SCIE, ISSN: 2286-6206, IF 2.545).
[12] Bhandari, B.,Ahn, S.H., Ahn, T. B, 2016, "Optimization of hybrid renewable energy power system for remote installations: Case studies for mountain and island," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 17, No. 6,pp. 815-822, July 2014, (SCIE, IF 1.075, ISSN: 2234-7593).
[11] Rodrigue, H., Cho, S., Han, M.W., Bhandari, B., Shim, J.E. and Ahn, S.H., 2016, "Effect of Twist Morphing Wing Segment on Aerodynamic Performance of UAV," Journal of Mechanical Science and Technology, Vol. 30, No. 1, pp 229-236, Korean Society of Mechanical Engineers, First online: 13 January 2016 (SCI(E), IF 1.128, JCR Rank 87/130 in Engineering, Mechanical, ISSN 1738-494X).
[10] Rodrigue, H., Wang, W., Bhandari, B. and Ahn, S.H., 2015, "Fabrication of Wrist-like SMA-based Actuator by Double Smart Soft Composite Casting," Smart Materials and Structures, Vol. 24, No. 12, No. 125003 (SCI, IF 2.909, JCR Rank 5/56 in Instruments & Instrumentation, ISSN: 0964-1726).
[9] Rodrigue, H., Wang, W., Bhandari, B., Han, M.W. and Ahn, S.H., 2015, "SMA-Based Smart Soft Composite Structure Capable of Multiple Modes of Actuation," Composites Part B: Engineering, Vol. 82, December 2015, pp. 152-158 (SCI, IF 4.727, JCR Rank 5/83 in Engineering, Multidisciplinary, ISSN 1359-8368, http://dx.doi.org/10.1016/j.compositesb.2015.08.020).
[8] Rodrigue, H., Bhandari, B., Wang, W. and Ahn, S.H., 2015, "3D Soft Lithography: A Fabrication Process for Thermocurable Polymers," Journal of Materials Processing Technology, Volume 217, March 2015, pp. 302-309, Elsevier Science ltd (England) (SCI(E), IF 3.147 JCR Rank 5/44 in Engineering, Industrial, ISSN 0924-0136, DOI 10.1016/j.jmatprotec.2014.11.005), Google Scholar citation: 5.
[7] Rodrigue, H., Bhandari, B., Han, M.W. and Ahn, S.H., 2015, "A Shape Memory Alloy-Based Soft Morphing Actuator Capable of Pure Twisting Motion," Journal of Intelligent Material Systems and Structures, Vol. 26, No. 9, pp. 1071-1078, SAGE publication ltd (England), (SCI(E), IF 2.172, ISSN 1530-8138, DOI 10.1177/1045389X14536008, JCR Ranking 68/251 in Materials Science, Multidisciplinary), Google Scholar Citation: 11.
[6] Bhandari, B., Lee, K.T., Lee, G.Y., Cho, Y. M. and Ahn, S.H., 2015, "Optimization of Hybrid Renewable Energy Power Systems: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 2, Issue 1, pp. 99-112 (SCIE, IF 1.500, ISSN: 2234-7593, JCR Rank 13/39(33.3%, 2013) in Engineering, Manufacturing), Springer Award: Most Downloaded Article.
[5] Rodrigue, H., Wang, W., Bhandari, B., Han, M.W. and Ahn, S.H., 2014, "Cross-Shaped Twisting Structure using SMA-Based Smart Soft Composite," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 1, No. 2, pp. 153-156 (SCI(E), IF 3.494, JCR Rank 16/132 in Engineering, Mechanical, ISSN: 2288-6206, DOI 10.1007/s40684-014-0020-5), Google Scholar citation: 18.
[4] Bhandari, B., Poudel, S.R., Lee, K.T. and Ahn, S.H., 2014, "Mathematical Modeling of Hybrid Renewable Energy System: A Review on Small HYdro-Solar-Wind Power Generation," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 1, No. 2, pp. 157-173 (SCIE, ISSN: 2234-7593)., Free Download.
[3] Bhandari, B., Lee, K.T., Lee, C.S., Song, C.K., Maskey, R.K. and Ahn, S.H., 2014, "A Novel Off-grid Hybrid Power System Comprised of Solar Photovoltaic, Wind, and Hydro Energy Sources," Applied Energy, Elsevier, Vol. 133, No. 15, pp. 236-242, November 2014 (SCI, I.F. 5.261, ISSN: 0306-2619, DOI: 10.1016/j.apenergy.2014.07.033, JCR Rank 6/133(4.5%, 2013) in Engineering, Chemical), IF: 5.261.
[2] Bhandari, B., Hong, Y.S., Yoon, H.S., Moon, J.S., Pham, M.Q., Lee, G. B., Huang, Y. Linke, B. S., Dornfeld, D. A., Ahn, S.H., 2014, "Development of a Micro-Drilling Burr-Control Chart for PCB Drilling," Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, Elsevier Science Inc. (USA), Vol. 38, No. 1, pp. 221-229, January (SCI(E), IF 1.403, DOI: 10.1016/j.precisioneng.2013.07.010, ISSN: 0141-6359, JCR Impact Factor Rank: 23/87 (2013) in ENGINEERING, MULTIDISCIPLINARY).
[1] Bhandari, B., Lee, G.Y., and Ahn, S.H., 2012, "A Review on IPMC Material as Actuators and Sensors: Fabrication, Characterization and Applications," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 13, No. 1, pp. 141-163, Jan. (SCIE, IF 1.141, DOI: 10.1007/s12541-011-0116-6, ISSN: 1229-8557, IJPEM Most Downloaded Article Award 2012.
CATEGORY : DOMESTIC JOURNAL
[2] 김민수, Binayak Bhandari, Bhandari, P., 퍼우델 시워 라즈, 이경태, 추원식, 김형일, Bhattachan, A., Mogasale, V., 이선영, 안성훈, 2015, "신재생 에너지를 사용한 네팔 고산지역의 백신 저온 유통 체계 구축," Journal of Appropriate Technology, Academic Society for Appropriate Technology (Korea), Vol. 1, No. 1, pp. 79-83, December, First issue.
[1] 안성훈, 이경태, Binayak Bhandari, 이길용, 이선영, 송철기, 2012, "지속가능성을 고려한 산악지역 독립망 전력 시스템의 신재생 에너지원 구성 전략," 한국정밀공학회지, 한국정밀공학회, Vol. 29, No. 9, pp. 958-963, 특집.
CATEGORY : INTERNATIONAL CONFERENCE
[18] Lee, K.T., Chu, W.S., Bhandari, B., Bhandari, P., Bhattachan, A., Kim, S.M., Lee, K.I., Poudel, S.R., Kim, M.S., Kim, E.S., Kim, M., Lee, J.Y., Kim, H.I., Kang,H.E., Lee, J.G., Sung, Y.K., Cho, S.H., Fengpei, Y., Lee, C.S., Mogasale, V., Ahn, S.H., et al.,, 2015, "Construction of Renewable Energy System and Applying to Health Service in Mountainous Area of Nepal," International Symposium on Green Manufacturing and Application (ISGMA 2015), Korean Society of Precision Engineering(KSPE), June 23-27, Shangri-La Hotel, Qingdao, China.
[17] Kim, M.S.,Kim, H.I.,Poudel, S.R.,Kim, M.,Bhandari, B.,Lee, K.T.,Chu, W.S., Anuj Bhattachan,Ahn, S.H., 2015, "Development of Backpack Type Vaccine Carrier - a Case Study in Nepal," International Symposium on Green Manufacturing and Application (ISGMA 2015), Korean Society of Precision Engineering(KSPE), June 23-27, Shangri-La Hotel, Qingdao, China..
[16] Bhandari, B., Ahn, S.H.,Lee, K.T., 2014, "Implementation of Tri-Hybrid Renewable Energy System (THRES) in Thingan, Nepal," Wind Energy Asia 2014, Asian Development Bank and Korean Wind Energy Industry Association.
[15] Bhandari, B., Lee, K.T.,Lee, C. S., Song, C. K and Ahn, S.H., 2014, "Evaluation of Tri-Hybrid Renewable Energy System (THRES)," International Symposium on Green Manufacturing and Applications (ISGMA 2014) (Busan, Jun 24~28, 2014).
[14] Lee, G.Y., Chu, W.S., Lee, K.T., Bhandari, B., Kim, M.S., Kim, H.S., Park, J.I., Bilegt, E., Lee, J.Y., Yoon, H.S., Park, G.H., Min, K.W., Kang, Y.S., Song, J.H., Song, C.K., Lee, C.S., Ahn, S.H. et al., 2013, "An Optimal Design and Performance Evaluation of Korean Traditional Ondol System in Varing Gorae Geometry Application of Goguryeo Style Jjok Gudeul," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[13] Lee, K.T., Bhandari, B., Chu, W.S., Lee, G.Y., Yoon, H.S., Lee, J.Y., Bilegt, E., Park, J.I., Kim, M.S., Song, J.H., C. S. Lee, C. K. Song, Ahn, S.H., et al., 2013, "Installation of off-grid hybrid power generation system and smart grid in remote mountainous village of Nepal," International Symposium on Green Manufacturing and Applications (ISGMA 2013), Korean Society for Precision Engineering (KSPE), June 26-29, Honolulu, Hawaii, USA.
[12] Bhandari, B., Lee, K.T., Cho, Y.M., Lee, C.S., Song,C.K and Ahn, S.H., 2013, "Hybridization of Multiple Renewable Power Sources for remote village electrification," International Symposium on Green Manufacturing and Applications, 2013.
[11] Bhandari, B., Lee, K.T., Han, M.W., Lee, H.T., Caroline S. Lee, Chul Ki Song, Ramesh K. Maskey and Ahn, S.H., 2012, "Providing electricity: Sustainable electrification in remote villages of Nepal.," International Symposium on Green Manufacturing and Applications (ISGMA 2012).
[10] Yoon, H.S., Bhandari, B., Moon, J.S., Kim, C.S., Gyu-Bong Lee, Kwang Wook Park, Chul-Ki Song, and Ahn, S.H., 2012, "Energy Analysis of Micro-drilling Process used to Manufacture Printed Circuit Boards," 19th CIRP conference on Life Cycle Engineering (LCE), UC Berkeley, May 23-25, Berkeley, CA, USA.
[9] Ahn, S.H., Bhandari, B., Lee, G.Y., Lee, K.T., Yoon, H.S., Kim, D.H., Song, S.H., Moon, J.S., Sung-In Kim, Yoon-Ho Kim, Hak-Chan Kim, Sun-Kyung Yu, Won-Jong Eun, Hye-Seung Jeong and Ramesh Maskey, 2011, "Off-grid sustainable small-scale Photovoltaic (PV) project in high altitude region of Nepal," International Conference on Appropriate Technology, December 2, SNU, Seoul, Korea..
[8] Yoon, H.S., Hong, Y.S., Bhandari, B., Moon, J.S., and Ahn, S.H., 2011, "Energy Saving in Micro-drilling for PCB Manufacturing by Controlling Drilling Conditions," Asian Symposium for Precision Engineering and Nanotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 16-18, Hong Kong.
[7] Bhandari, B., Hong, Y.S., Yoon, H.S., Lee, J.C., Moon, J.S., David A. Dornfeld, Barbara S. Linke, Yu-Chu Huang, Gyu-Bong Lee, Ahn, S.H., 2011, "Development of micro drilling burr control chart based on Taguchi methods for PCB drilling," Asian Symposium for Precision Engineering and Nanotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 16-18, Hong Kong, Best Paper Award.
[6] Bhandari, B., Lee, G.Y., D.S. Choi, J.H. Kim, Ahn, S.H., 2011, "Development of CFRP precision gantry beams for 11th Generation LCD Panel manufacturing," 18th International Conference on composite materials, August 21-26, 2011, Jeju Island, Korea.
[5] Bhandari, B., Lee, G.Y., Dong-Soo Choi, Jun-Hyun Kim, Ahn, S.H., 2011, "CFRP Gantry Beams for Energy Saving in LCD Manufacturing Motion Stage System," International Symposium on Green Manufacturing and Application 2011, October 6 Thrusday- 7 Friday 2011, Hoam Convention Center, Seoul National University, Seoul, Korea.
[4] Bhandari, B., Lee, G.Y., Lee, K.T., Yoon, H.S., Kim, D.H., Song, S.H., Moon, J.S., Ramesh K. Maskey, Ahn, S.H., 2011, "Off-grid sustainable small-scale Photovoltaic (PV) project in high altitude region of Nepal," Addressing Climate Change For Sustainable Development Through Up-Scaling Renewable Energy Technologies, October 12-14, Kathmandu, Nepal.
[3] Bhandari, B., Chun, D.M., Kim, M.S., Choi, J.O., Lee, J.C.,Y.H. Kim, C. S. Lee, Ahn, S.H., 2011, "Study of process parameters of nano particle deposition system (NPDS) by computational fluid dynamics for the fabrication of dye-sensitized solar cells (DSSC)," World Engineers’ Convention 2011, Geneva 4-9 September.
[2] Ramesh Maskey, Bhandari, B., Lee, G.Y., Lee, K.T., Yoon, H.S., Kim, D.H., Song, S.H., Moon, J.S., Sung-In Kim, Yoon-Ho Kim, Hak-Chan Kim, Sun-Kyung Yu, Won-Jong Eun, Hye-Seung Jeong, and Ahn, S.H., 2011, "Solar Generating System Installation and a Study on the Efficiency Monitoring in High Altitude Village in Nepal," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Korean Society of Precision Engineering and Manufacturing (KSPE) and etc., October 6-7, Seoul National University, Seoul, KOREA.
[1] Barbara S. Linke, Yoon, H.S., Hong, Y.S., Bhandari, B., Moon, J.S., and Ahn, S.H., 2011, "Energy Efficient Drilling for PCB Manufacturing Considering Lead Time," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Korean Society of Precision Engineering and Manufacturing (KSPE) and etc., October 6-7, Seoul National University, Seoul, KOREA.
CATEGORY : DOMESTIC CONFERENCE
[7] 이경태, 안성훈, 추원식, Binayak Bhandari, Pratibha Bhandari, Anuj Bhattachan, 김수미, 이강인, 퍼우델 시워 라즈, 김민수, 김은섭, 김민철, 이장엽, 김형일, 강하은, 이재경, 성연국, 조성현, Yuan Fengpei, 표영준, 강수희, 손연호, 노유한, 송기현, 안희라, 이선영, Vittal Mogasale, 2015, "네팔 고산지역에서의 신재생 에너지 시스템 구축과 이를 활용한 의료 서비스," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 13~15일, 제주 라마다프라자제주호텔, 제주.
[6] 이경태, Binayak Bhandari, 한민우, 이현택, 노민균, 민경욱, 박지훈, 안희진, 장문혁, 배주영, 김병철, 구인욱, 김형섭, 채홍식, 조단이, 한웅재, 박광욱, 정웅기, 송철기, 이선영, 안성훈, 2012, "5 kW 태양전지 발전 시스템을 사용한 대면적 산간 마을의 전력 공급," 한국정밀공학회 2012년도 춘계학술대회, 한국정밀공학회, 5월 31일~ 6월 1일, 라마다프라자제주호텔, 제주.
[5] 이길용, Binayak Bhandari, 이경태, 김동현, 윤해성, 문종설, 송성혁, 안성훈, 2011, "네팔 고산지역 태양전지 발전시스템 설치 지원," 한국정밀공학회 2011 추계학술대회, 한국정밀공학회, 10월 26일-28일, 경주교육문화회관, 경주.
[4] 이종천, 윤해성, 문종설, Binayak Bhandari, 장규범, 안성훈*, 2011, "마이크로 드릴을 이용한 동박적층판 구멍가공에서의 버 형성과 가속수명시험," 2011년 한국복합재료학회 추계학술대회, 한국복합재료학회, 11월 18일, CECO, 창원.
[3] Binayak Bhandari, 이길용, Dong-Soo Choi, Jun-Hyun Kim, 안성훈, 2011, "CFRP composite gantry beams for energy and weight saving," 한국정밀공학회 2011년도 춘계학술대회.
[2] 윤해성, 홍영선, Binayak Bhandari, 문종설, 안성훈*, 2011, "PCB 가공공정에서 드릴링 가공 조건 변화를 이용한 에너지 절감 전략," 한국기계가공학회 춘계학술대회, 한국기계가공학회, 6월 16~17일, 부경대학교, 부산.
[1] 이길용, Binayak Bhandari, 이재철, 김명섭, 최동수, 김준현, 안성훈*, 2010, "정밀 스테이지의 탄소섬유강화플라스틱 갠트리 크로스빔의 설계에 관한 연구," 한국복합재료학회 추계학술대회, 한국복합재료학회, 10월 22일, 100주년 기념관, 서울과학기술대학교, 서울.
CATEGORY : THESIS
[1] Bhandari, B., 2014, "Design and Evaluation of Tri-Hybrid Renewable Energy System (THRES)," Ph.D thesis, Seoul National University.
CATEGORY : INVITED PRESENTATION
[4] Bhandari, B., Lee, K.T. and Ahn, S.H., 2014, "Implementation of Tri-Hybrid Renewable Energy System (THRES) in Thingan, Nepal," Wind Energy Asia 2014, Asian Development Bank and Korean Wind Energy Industry Association, Jeju, Korea, February 21-22.
[3] Bhandari, B., Ahn, S.H., 2012, "Appropriate Technologies in the context of Nepal: An Engineer's perspective," Good Neighbors International, Appropriate Technology Innovation Camp, July.
[2] Bhandari, B., Ahn, S.H., 2012, "Appropriate Technologies in the context of Nepal," Society of Nepalese Student in Korea, (SONSIK), 1st Educational Seminar 2012, Nepali Embassey, Seoul, Korea , 26 May, 2012.
[1] Ahn, S.H., Lee, G.Y., Yan, J., Kim, M.S., Bhandari, B., and Pandey, J.K., 2012, "탄소기반 복합재의 기능성 부여 및 응용," 현대자동차 중앙연구소, 의왕, 4월 9일.
CATEGORY : PATENT
[1] 안성훈, Binayak Bhandari, 팜민콴 and 박성원, 2012, "Rope-way based on Gravity," 10-2012-0064006 (2012.06.15.) 심사청구(유). 공개신청(무) .
CATEGORY : HONORS/AWARDS
[6] Bhandari, B., Lee, K.T., Lee, G.Y., Cho, Y. M., and Ahn, S.H., 2016, "Most Downloaded Article Award, 2014 to 2015 - Optimization of Hybrid Renewable Energy Power Systems: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 2, No. 1, pp. 99-112, 2015.
[5] Bhandari, B., Lee, G.Y., Ahn, S.H., 2013, "IJPEM Most Downloaded Article Award 2012, "A review on IPMC material and actuators and sensors: fabrication, characterization and applications"," KSPE and Springer, International Journal of Precision Engineering and Manufacturing.
[4] Lee, G.Y., Lee, K.T., Bhandari, B., Chu, W.S., Yoon, H.S., Lee, J.Y., Bilegt, E., Park, J.I., Kim, M.S., Kim, H.S., 민경욱, 강영석, 박지훈, Song, J.H., 유은지, 김민희, 장문혁, 김범호, Maskey, A., 김형섭, 조단이, 최다현, 김동휘, 박철환, 박찬동, 한현석, 심재환, 한성길, 박지환, 조원희, 문준영, 송세용, 신현민, Bhandari, P., Ahn, S.H., Lee, C.S., 송철기, 2013, "국토교통부장관상(대상), Nepal Solar Volunteer Corps," 제5회 소외된 90%를 위한 창의설계 경진대회, 한양대학교, 한밭대학교, 한동대학교, (사)나눔과기술, 5월 24일, 한양대학교, Award from Minister of Land, Infrastructure and Transport, Korea.
[3] Seunggyu Jeong, Sangseok Yoon, Bhandari, B. and Ahn, S.H., 2012, "Water Vest," 소외된 90%를 위한 창의적 공학설계 경진대회, 한밭대학교 총장상.
[2] Bhandari, B., Hong, Y.S., Yoon, H.S., Lee, J.C., Moon, J.S., David A. Dornfeld, Barbara S. Linke, Yu-Chu Huang, Gyu-Bong Lee, Ahn, S.H., 2011, "Best Paper Award, Development of micro drilling burr control chart based on Taguchi methods for PCB drilling," Asian Symposium for Precision Engineering and Naotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 17, Hong Kong, Best Paper Award.
[1] Bhandari, B., Lee, G.Y., Kim, M.S., Lee, J.C., Dong-Soo Choi, Jun-Hyun Kim, Ahn, S.H., 2010, "Grand Prize," Design & Fabrication of High Stiffness 8th Generation LCD Manufacturing Ultra Precision Stage System, International Research Poster Competition, Seoul National University.