IDIM Member Publications
Jong-Cheon Lee


CATEGORY : INTERNATIONAL JOURNAL
[2] Kim, M.S., Chun, D.M., Choi, J.O., Lee, J.C., Kim, Yang Hee, Kim, Kwang-Su, Caroline Sunyong Lee, Ahn, S.H.*, 2012, "Dry-spray Deposition of TiO2 for Flexible Dye-Sensitized Solar Cell (DSSC) using Nano Particle Deposition System (NPDS)," Journal of Nanoscience and Nanotechnology, Vol. 12, pp. 3384-3388 (doi:10.1166/jnn.2012.5548, JCR Impact Factor Rank: 130/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY).
[1] Kim, M.S., Chun, D.M., Choi, J.O., Lee, J.C., Kwang-Su Kim, Yang Hee Kim, Caroline Sunyong Lee and Ahn, S.H., 2011, "Room Temperature Deposition of TiO2 using Nano Particle Deposition System (NPDS): Application to Dye-Sensitized Solar Cell (DSSC)," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), Vol. 12, No. 4, pp. 749-752, August, (SCI(E), IF 1.141, DOI: 10.1007/s12541-011-0099-3 ,ISSN : 2234-7593, JCR Impact Factor Rank: 33/128 (2013) in ENGINEERING, MECHANICAL).
CATEGORY : INTERNATIONAL CONFERENCE
[9] Kim, M.S., Yoon, H.S., Lee, J.Y., Lee, J.C., Moon, J.S., Ahn, S.H., 2013, "Energy Consumption Model using Electrical Load in Milling Machine," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[8] Lee, J.Y., Kim, M.S., Yoon, H.S., Lee, J.C., Moon, J.S., Ahn, S.H., 2013, "Control of Cutting Parameters using Relative Vibration of Milling Tool to Workpiece for Chatter Prediction," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[7] Lee, J.C., Moon, J.S., Jang, G.B., Ahn, S.H., 2012, "Accelerated Life Test of Micro Drill Bit for Printed Circuit Board (PCB) Machining," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Korean Society of Precision Engineering, August 27-29, Jeju, Korea.
[6] Bhandari, B., Hong, Y.S., Yoon, H.S., Lee, J.C., Moon, J.S., David A. Dornfeld, Barbara S. Linke, Yu-Chu Huang, Gyu-Bong Lee, Ahn, S.H., 2011, "Development of micro drilling burr control chart based on Taguchi methods for PCB drilling," Asian Symposium for Precision Engineering and Nanotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 16-18, Hong Kong, Best Paper Award.
[5] Bhandari, B., Chun, D.M., Kim, M.S., Choi, J.O., Lee, J.C.,Y.H. Kim, C. S. Lee, Ahn, S.H., 2011, "Study of process parameters of nano particle deposition system (NPDS) by computational fluid dynamics for the fabrication of dye-sensitized solar cells (DSSC)," World Engineers’ Convention 2011, Geneva 4-9 September.
[4] Ahn, S.H.*, Hong, Y.S., Lee, J.C., Yoon, H.S., Lee, K.E., Moon, J.S. and Tae-Mu Lee, 2011, "Improvement of tool life of micro drill-bits for PCB manufacturing," MicroManufacturing Conference & Exhibits, Society of Manufacturing Engineers (SME), April 5-6, Oakbrook Terrace, IL, USA.
[3] Kim, Y.H., Kim, K.S., Cho, D.G., Kim, M.S., Chun, D.M., Lee, J.C., Ahn, S.H., and Lee, C.S.*, 2010, "Investigation of photovoltaic efficiency of dye sensitiezed solarcell fabricated by Nano Particle Deposition System (NPDS) bt varying thickness of sealing sheets," 2010 Materials Research Society fall meeting, November 29-December 3, Boston, MA, US.
[2] Kim, Y.H., Kim, K.S., Cho, D.G., Kim, M.S., Chun, D.M., Lee, J.C., Ahn, S.H., and Lee, C.S*, 2010, "Fabrication of Different Particle Size of TiO2 for Dye-Sensitized Solar Cell (DSSC) Using Nano Particle Deposition System (NPDS)," ENGE 2010 International Conference on Electronic Materials and Nanotechology for Green Environment, November 21-24, 2010, Ramada Plaza Jeju Hotel, Jeju Island, Korea.
[1] Kim, M.S., Chun, D.M., Lee, J.C., Kim, Y.H., Kim, K.S., Caroline Sunyong Lee, Ahn, S.H.*, 2010, "Dry-spray deposition of TiO2 for flexible dye-sensitized solar cell (DSSC) using nano particle deposition system (NPDS)," ENGE 2010 International Conference on Electronic Materials and Nanotechology for Green Environment, November 21-24, 2010, Ramada Plaza Jeju Hotel, Jeju Island, Korea.
CATEGORY : DOMESTIC CONFERENCE
[8] 이종천, 문종설, 한민우, 장규범, 안성훈, 2012, "인쇄회로기판 가공용 마이크로 드릴의 가속수명시험," 한국기계가공학회 2012년도 춘계학술대회, 한국기계가공학회, 6월 28일~29일, 한국폴리텍I대학 서울정수캠퍼스, 서울.
[7] 홍영선, 이종천, 문종설, 안성훈, 2011, "마이크로 드릴의 절삭조건과 소재에 의한 PCB 가공특성(Effect of machining conditions and bit materials of micro drill on PCB machining characteristics)," 한국정밀공학회 2011년도 춘계학술대회, 한국정밀공학회, 6월 1~3일, 라마다프라자제주호텔, 제주.
[6] 이종천, 윤해성, 문종설, Binayak Bhandari, 장규범, 안성훈*, 2011, "마이크로 드릴을 이용한 동박적층판 구멍가공에서의 버 형성과 가속수명시험," 2011년 한국복합재료학회 추계학술대회, 한국복합재료학회, 11월 18일, CECO, 창원.
[5] 이종천, 문종설, 한민우, 장규범, 안성훈*, 2011, "마이크로 드릴의 가속수명시험," 한국정밀공학회 2011 추계학술대회, 한국정밀공학회, 10월 26일-28일, 경주교육문화회관, 경주.
[4] 이경은, 이종천, 이희신, 안성훈, 2010, "마이크로 엔드밀의 가공특성 평가 : 솔리드, 인서트, 브레이징 타입의 예," 한국정밀공학회 2010년도 추계학술대회, 한국정밀공학회, 11월 10-12일, 창원컨벤션센터, 창원.
[3] 천두만, 김민생, 이종천, 최정오, 안성훈*, 2010, "나노 입자 적층 시스템에서의 공정조건에 따른 Al2O3 세라믹 입자의 적층 특성 변화 연구 (Study of the effect of process parameters in nano particle deposition system (NPDS) for Al2O3 powder deposition)," 한국정밀공학회 2010년도 추계학술대회, 11월 10-12일, 창원컨벤션센터, 창원.
[2] 김양희, 신상훈, 김광수, 김민생, 천두만, 이종천, 안성훈, 이선영* , 2010, "나노 입자 적층 시스템을 이용하 TiO2 충의 염료감응태양전지(DSSC) 제조에 대한 연구," 2010년도 대한금속 재료학회 춘계 학술대회, 대한금속 재료학회, 4월 22~23일, 현대성우리조트, 횡성.
[1] 김민생, 천두만, 이종천, 김양희, 신상훈,이선영, 안성훈*, 2010, "나노 입자 적층 시스템을 이용한 TiO2 세라믹의 상온 적층 : 염료감응형 태양전지 제작에 응용," 2010년도 한국세라믹학회 춘계 연구발표회, 한국세라믹학회, 4월 22~23일, 창원컨벤션센터, 창원.
CATEGORY : THESIS
[1] Lee, J.C., 2013, "Accelerated life test of micro drill and micro end mill for printed circuit board," Master thesis, Seoul National University.
CATEGORY : HONORS/AWARDS
[1] Bhandari, B., Hong, Y.S., Yoon, H.S., Lee, J.C., Moon, J.S., David A. Dornfeld, Barbara S. Linke, Yu-Chu Huang, Gyu-Bong Lee, Ahn, S.H., 2011, "Best Paper Award, Development of micro drilling burr control chart based on Taguchi methods for PCB drilling," Asian Symposium for Precision Engineering and Naotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 17, Hong Kong, Best Paper Award.