IDIM Member Publications
Jong-Seol Moon


CATEGORY : INTERNATIONAL JOURNAL
[4] Hong, Y.S., Yoon, H.S., Moon, J.S., Cho, Y.M.*, and Ahn, S.H.*, 2016, "Tool-wear monitoring during micro-end milling using wavelet packet transform and Fisher’s linear discriminant," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 17, No. 7, pp. 845-855, July (SCI(E), IF 1.075, DOI: 10.1007/s12541-016-0103-z, ISSN: 2234-7593, JCR Impact Factor Rank: 67/132 (2015) in ENGINEERING, MECHANICAL).
[3] Bhandari, B., Hong, Y.S., Yoon, H.S., Moon, J.S., Pham, M.Q., Lee, G. B., Huang, Y. Linke, B. S., Dornfeld, D. A., Ahn, S.H., 2014, "Development of a Micro-Drilling Burr-Control Chart for PCB Drilling," Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, Elsevier Science Inc. (USA), Vol. 38, No. 1, pp. 221-229, January (SCI(E), IF 1.403, DOI: 10.1016/j.precisioneng.2013.07.010, ISSN: 0141-6359, JCR Impact Factor Rank: 23/87 (2013) in ENGINEERING, MULTIDISCIPLINARY).
[2] Moon, J.S., Yoon, H.S., Lee, G. B., and Ahn, S.H., 2014, "Effect of Backstitch Tool Path on Micro-drilling for Printed Circuit Board," Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, Elsevier Science Inc. (USA), Vol. 38, No. 3, pp. 691-696, July (SCI(E), IF 1.403, DOI: 10.1016/j.precisioneng.2014.03.002, ISSN: 0141-6359, JCR Impact Factor Rank: 23/87 (2013) in ENGINEERING, MULTIDISCIPLINARY).
[1] Yoon, H.S., Moon, J.S., Pham, M.Q., Lee, G. B., and Ahn, S.H., 2013, "Control of Machining Parameters for Energy and Cost Savings in Micro-scale Drilling of PCBs," Journal of Cleaner Production, Elsevier Science ltd (England), Vol. 54, pp. 41-48, September (SCI(E), IF 3.398, DOI:10.1016/j.jclepro.2013.04.028, ISSN: 0959-6526, JCR Impact Factor Rank: 29/210 (2012) 29/216 (2013) in ENVIRONMENTAL SCIENCES), IF 3.398.
CATEGORY : INTERNATIONAL CONFERENCE
[18] Kim, M.S., Yoon, H.S., Lee, J.Y., Lee, J.C., Moon, J.S., Ahn, S.H., 2013, "Energy Consumption Model using Electrical Load in Milling Machine," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[17] Lee, J.Y., Kim, M.S., Yoon, H.S., Lee, J.C., Moon, J.S., Ahn, S.H., 2013, "Control of Cutting Parameters using Relative Vibration of Milling Tool to Workpiece for Chatter Prediction," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[16] Moon, J.S., Yoon, H.S., Lee, G.B. and Ahn, S.H., 2012, "Evaluation of Backstitch Tool Path Strategy for Stability and Productivity in Micro-drilling," International Mechanical Engineering Congress & Exposition (IMECE), American Society of Mechanical Engineers (ASME), November 9-15, Houston, TX, USA.
[15] Yoon, H.S., Moon, J.S., Pham, M.Q., and Ahn, S.H., 2012, "Decomposition of energy consumptions in micro-drilling process," International Conference of Manufacturing Technology Engineers (ICMTE) 2012, Korea Society of Manufacturing Technology Engineers, October 18-19, Seoul, Korea.
[14] Pham, M.Q., Yoon, H.S., Moon, J.S., Khare, V. and Ahn, S.H., 2012, "Application of Ionic Liquid as Novel Lubricant in Micro Milling ," International Symposium on Green Manufacturing and Application (ISGMA 2012), Korean Society of Precision Engineering and etc., August 27-29, Jeju, Korea.
[13] Yoon, H.S., Moon, J.S., Pham, M.Q., Gyu-Bong Lee, and Ahn, S.H., 2012, "Construction of Energy Cost Model for PCB Drilling," International Symposium on Green Manufacturing and Application (ISGMA 2012), Korean Society of Precision Engineering and etc., August 27-29, Jeju, Korea.
[12] Lee, J.C., Moon, J.S., Jang, G.B., Ahn, S.H., 2012, "Accelerated Life Test of Micro Drill Bit for Printed Circuit Board (PCB) Machining," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Korean Society of Precision Engineering, August 27-29, Jeju, Korea.
[11] Moon, J.S., Yoon, H.S., Lee, G. B. and Ahn, S.H., 2012, "Effect of Micro-drilling Sequence on PCB Manufacturability," International Symposium on Green Manufacturing and Applications (ISGMA 2012), Korean Society of Precision Engineering, August 27-29, Jeju, Korea.
[10] Yoon, H.S., Bhandari, B., Moon, J.S., Kim, C.S., Gyu-Bong Lee, Kwang Wook Park, Chul-Ki Song, and Ahn, S.H., 2012, "Energy Analysis of Micro-drilling Process used to Manufacture Printed Circuit Boards," 19th CIRP conference on Life Cycle Engineering (LCE), UC Berkeley, May 23-25, Berkeley, CA, USA.
[9] Ahn, S.H., Bhandari, B., Lee, G.Y., Lee, K.T., Yoon, H.S., Kim, D.H., Song, S.H., Moon, J.S., Sung-In Kim, Yoon-Ho Kim, Hak-Chan Kim, Sun-Kyung Yu, Won-Jong Eun, Hye-Seung Jeong and Ramesh Maskey, 2011, "Off-grid sustainable small-scale Photovoltaic (PV) project in high altitude region of Nepal," International Conference on Appropriate Technology, December 2, SNU, Seoul, Korea..
[8] Yoon, H.S., Hong, Y.S., Bhandari, B., Moon, J.S., and Ahn, S.H., 2011, "Energy Saving in Micro-drilling for PCB Manufacturing by Controlling Drilling Conditions," Asian Symposium for Precision Engineering and Nanotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 16-18, Hong Kong.
[7] Bhandari, B., Hong, Y.S., Yoon, H.S., Lee, J.C., Moon, J.S., David A. Dornfeld, Barbara S. Linke, Yu-Chu Huang, Gyu-Bong Lee, Ahn, S.H., 2011, "Development of micro drilling burr control chart based on Taguchi methods for PCB drilling," Asian Symposium for Precision Engineering and Nanotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 16-18, Hong Kong, Best Paper Award.
[6] Bhandari, B., Lee, G.Y., Lee, K.T., Yoon, H.S., Kim, D.H., Song, S.H., Moon, J.S., Ramesh K. Maskey, Ahn, S.H., 2011, "Off-grid sustainable small-scale Photovoltaic (PV) project in high altitude region of Nepal," Addressing Climate Change For Sustainable Development Through Up-Scaling Renewable Energy Technologies, October 12-14, Kathmandu, Nepal.
[5] Young Man Cho, Hong, Y.S., Kyung-Seok Lee, Yoon, H.S., Moon, J.S., Han-Uk Choi, and Ahn, S.H., 2011, "Condition monitoring for gearbox of wind power generation system using wavelet packet transform," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Korean Society of Precision Engineering and Manufacturing (KSPE) and etc., October 6-7, Seoul National University, Seoul, KOREA.
[4] Ramesh Maskey, Bhandari, B., Lee, G.Y., Lee, K.T., Yoon, H.S., Kim, D.H., Song, S.H., Moon, J.S., Sung-In Kim, Yoon-Ho Kim, Hak-Chan Kim, Sun-Kyung Yu, Won-Jong Eun, Hye-Seung Jeong, and Ahn, S.H., 2011, "Solar Generating System Installation and a Study on the Efficiency Monitoring in High Altitude Village in Nepal," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Korean Society of Precision Engineering and Manufacturing (KSPE) and etc., October 6-7, Seoul National University, Seoul, KOREA.
[3] Barbara S. Linke, Yoon, H.S., Hong, Y.S., Bhandari, B., Moon, J.S., and Ahn, S.H., 2011, "Energy Efficient Drilling for PCB Manufacturing Considering Lead Time," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Korean Society of Precision Engineering and Manufacturing (KSPE) and etc., October 6-7, Seoul National University, Seoul, KOREA.
[2] Chih-Hsing Chu, Kim, H.J., Yoon, H.S., Moon, J.S., and Ahn, S.H., 2011, "Agent-based Cost Efficient Process Planning for Micro Milling," International Symposium on Green Manufacturing and Applications (ISGMA 2011), Korean Society of Precision Engineering and Manufacturing (KSPE) and etc., October 6-7, Seoul National University, Seoul, KOREA.
[1] Ahn, S.H.*, Hong, Y.S., Lee, J.C., Yoon, H.S., Lee, K.E., Moon, J.S. and Tae-Mu Lee, 2011, "Improvement of tool life of micro drill-bits for PCB manufacturing," MicroManufacturing Conference & Exhibits, Society of Manufacturing Engineers (SME), April 5-6, Oakbrook Terrace, IL, USA.
CATEGORY : DOMESTIC CONFERENCE
[9] 이종천, 문종설, 한민우, 장규범, 안성훈, 2012, "인쇄회로기판 가공용 마이크로 드릴의 가속수명시험," 한국기계가공학회 2012년도 춘계학술대회, 한국기계가공학회, 6월 28일~29일, 한국폴리텍I대학 서울정수캠퍼스, 서울.
[8] 윤해성, 문종설, 팜민콴, 안성훈, 2012, "PCB 생산을 위한 마이크로 드릴링 공정의 에너지 분석," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 30일 ~ 6월 1일, 라마다프라자제주호텔, 제주.
[7] 팜민콴, 윤해성, 문종설, 바르샤 카레, 안성훈, 2012, "윤활유로서 이온성 액체를 이용한 가공 품질의 향상 연구 (Improvement of Micromachining Quality Using Ionic Liquid As Lubricant)," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 30일 ~ 6월 1일, 라마다프라자제주호텔, 제주.
[6] 홍영선, 이종천, 문종설, 안성훈, 2011, "마이크로 드릴의 절삭조건과 소재에 의한 PCB 가공특성(Effect of machining conditions and bit materials of micro drill on PCB machining characteristics)," 한국정밀공학회 2011년도 춘계학술대회, 한국정밀공학회, 6월 1~3일, 라마다프라자제주호텔, 제주.
[5] 이길용, Binayak Bhandari, 이경태, 김동현, 윤해성, 문종설, 송성혁, 안성훈, 2011, "네팔 고산지역 태양전지 발전시스템 설치 지원," 한국정밀공학회 2011 추계학술대회, 한국정밀공학회, 10월 26일-28일, 경주교육문화회관, 경주.
[4] 이종천, 윤해성, 문종설, Binayak Bhandari, 장규범, 안성훈*, 2011, "마이크로 드릴을 이용한 동박적층판 구멍가공에서의 버 형성과 가속수명시험," 2011년 한국복합재료학회 추계학술대회, 한국복합재료학회, 11월 18일, CECO, 창원.
[3] 이종천, 문종설, 한민우, 장규범, 안성훈*, 2011, "마이크로 드릴의 가속수명시험," 한국정밀공학회 2011 추계학술대회, 한국정밀공학회, 10월 26일-28일, 경주교육문화회관, 경주.
[2] 문종설, 윤해성, 김형중, Kevin Tien, Chih-Hsing Chu, 안성훈, 2011, "출구 버 방지 전략을 이용한 에너지 절감 마이크로 가공," 한국정밀공학회 2011년도 추계학술대회, 한국정밀공학회, 10월 26~28일, 경주교육문화회관, 경주.
[1] 윤해성, 홍영선, Binayak Bhandari, 문종설, 안성훈*, 2011, "PCB 가공공정에서 드릴링 가공 조건 변화를 이용한 에너지 절감 전략," 한국기계가공학회 춘계학술대회, 한국기계가공학회, 6월 16~17일, 부경대학교, 부산.
CATEGORY : THESIS
[1] Moon, J.S., 2013, "Effect of backstitch tool path on machinability of micro-drilling for printed circuit board," Master thesis, Seoul National University.
CATEGORY : PATENT
[2] 이규봉, 안성훈, 윤해성, 문종설, 2012, "Machining Path Generating Method," 출원번호: PCT/KR2012/011102, 출원일: 2012.12.18.
[1] 이규봉, 안성훈, 윤해성, 문종설, 2012, "가공 경로 생성 방법 (Machining Path Generating Method)," 출원번호: 10-2012-0049600, 출원일: 2012.05.10, 10-1333768, 등록일: 2013.11.21.
CATEGORY : HONORS/AWARDS
[2] Song, S.H., Moon, J.S., Choi, J.O., Top Arame and Ahn, S.H., 2012, "소외된 90%를 위한 창의적 공학설계 경진대회," K-water 연구원, (사)나눔과 기술, 2012.04.06, K-water, Daejeon, 한국산업기술진흥원장.
[1] Bhandari, B., Hong, Y.S., Yoon, H.S., Lee, J.C., Moon, J.S., David A. Dornfeld, Barbara S. Linke, Yu-Chu Huang, Gyu-Bong Lee, Ahn, S.H., 2011, "Best Paper Award, Development of micro drilling burr control chart based on Taguchi methods for PCB drilling," Asian Symposium for Precision Engineering and Naotechnology (ASPEN) 2011, The Hong Kong Polytechnic University and etc., November 17, Hong Kong, Best Paper Award.