IDIM Member Publications
Minh-Quan Pham


CATEGORY : INTERNATIONAL JOURNAL
[4] Pham, M.Q., Yoon, H.S., Khare, V., and Ahn, S.H., 2014, "Evaluation of Ionic Liquids as Lubricants in Micro Milling - Process Capability and Sustainability," Journal of Cleaner Production, Elsevier Science ltd (England), Vol. 76, pp. 167-173, August (SCI(E), IF 3.590, DOI: 10.1016/j.jclepro.2014.04.055, ISSN: 0959-6526, JCR Impact Factor Rank: 29/216 (2013) in ENVIRONMENTAL SCIENCES), IF 3.590.
[3] Bhandari, B., Hong, Y.S., Yoon, H.S., Moon, J.S., Pham, M.Q., Lee, G. B., Huang, Y. Linke, B. S., Dornfeld, D. A., Ahn, S.H., 2014, "Development of a Micro-Drilling Burr-Control Chart for PCB Drilling," Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, Elsevier Science Inc. (USA), Vol. 38, No. 1, pp. 221-229, January (SCI(E), IF 1.403, DOI: 10.1016/j.precisioneng.2013.07.010, ISSN: 0141-6359, JCR Impact Factor Rank: 23/87 (2013) in ENGINEERING, MULTIDISCIPLINARY).
[2] Khare, V., Pham, M.Q., Kumari, N., Yoon, H.S. , Kim, C.S., Park, J.I., and Ahn, S.H., 2013, "Graphene-Ionic Liquid based Hybrid Nanomaterials as Novel Lubricant for low Friction and Wear," ACS Applied Materials and Interfaces, American Chemical Society (USA), Vol. 5, No. 10, pp. 4063-4075, April (SCI, IF 5.008, DOI: 10.1021/am302761c, ISSN: 1944-8244, JCR Impact Factor Rank: 26/241 (2012) 26/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY), IF 5.008.
[1] Yoon, H.S., Moon, J.S., Pham, M.Q., Lee, G. B., and Ahn, S.H., 2013, "Control of Machining Parameters for Energy and Cost Savings in Micro-scale Drilling of PCBs," Journal of Cleaner Production, Elsevier Science ltd (England), Vol. 54, pp. 41-48, September (SCI(E), IF 3.398, DOI:10.1016/j.jclepro.2013.04.028, ISSN: 0959-6526, JCR Impact Factor Rank: 29/210 (2012) 29/216 (2013) in ENVIRONMENTAL SCIENCES), IF 3.398.
CATEGORY : INTERNATIONAL CONFERENCE
[4] Khare, V., Yoon, H.S., Pham, M.Q., and Ahn, S.H., 2015, "Supported Ionic Liquid Graphene Membrane (SILGM) as novel lubricant for micro-end milling," The 18th International Symposium on Advances in Abrasive Technology (ISAAT 2015), 4-7 October, Jeju.
[3] Yoon, H.S., Moon, J.S., Pham, M.Q., and Ahn, S.H., 2012, "Decomposition of energy consumptions in micro-drilling process," International Conference of Manufacturing Technology Engineers (ICMTE) 2012, Korea Society of Manufacturing Technology Engineers, October 18-19, Seoul, Korea.
[2] Pham, M.Q., Yoon, H.S., Moon, J.S., Khare, V. and Ahn, S.H., 2012, "Application of Ionic Liquid as Novel Lubricant in Micro Milling ," International Symposium on Green Manufacturing and Application (ISGMA 2012), Korean Society of Precision Engineering and etc., August 27-29, Jeju, Korea.
[1] Yoon, H.S., Moon, J.S., Pham, M.Q., Gyu-Bong Lee, and Ahn, S.H., 2012, "Construction of Energy Cost Model for PCB Drilling," International Symposium on Green Manufacturing and Application (ISGMA 2012), Korean Society of Precision Engineering and etc., August 27-29, Jeju, Korea.
CATEGORY : DOMESTIC CONFERENCE
[2] 윤해성, 문종설, 팜민콴, 안성훈, 2012, "PCB 생산을 위한 마이크로 드릴링 공정의 에너지 분석," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 30일 ~ 6월 1일, 라마다프라자제주호텔, 제주.
[1] 팜민콴, 윤해성, 문종설, 바르샤 카레, 안성훈, 2012, "윤활유로서 이온성 액체를 이용한 가공 품질의 향상 연구 (Improvement of Micromachining Quality Using Ionic Liquid As Lubricant)," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 30일 ~ 6월 1일, 라마다프라자제주호텔, 제주.
CATEGORY : THESIS
[2] Pham, M.Q., 2013, "Characteristics of Ionic liquid as lubricant in micro milling," Master thesis, Seoul National University.
[1] Pham, M.Q., 2013, "Characteristics of Ionic liquid as lubricant in micro milling," Master thesis, Seoul National University.
CATEGORY : PATENT
[1] 안성훈, Binayak Bhandari, 팜민콴 and 박성원, 2012, "Rope-way based on Gravity," 10-2012-0064006 (2012.06.15.) 심사청구(유). 공개신청(무) .