IDIM Member Publications
Ji-Hyeon Song


CATEGORY : INTERNATIONAL JOURNAL
[8] Song, J.H., Ahn, S.H., Wang, Y., TBD, "Molecular dynamics study of nanoparticles sintering mechanism in laser assisted deposition process," TBD (In preparation, Updated:12/22).
[7] Song, J.H., Choi, K.H., Dai, R., Choi, J.O., Ahn, S.H., Wang, Y., TBD, "Controlled kinetic monte carlo simulation of laser sintering in nano particle deposition system," TBD (In preparation, Updated: 12/22).
[6] Song, J.H., Sonkaria S., Ahn, S.H., Lee, C.S., Khare, V., Submitted, "Tuning inter-crystalline void-like defects in nanowire clusters to TiO2 quantum wires with enhanced photocatalytic performance," Applied Catalysis B: Environmental (SCI, Submitted, Updated:12/22).
[5] Ahn, S.H., Choi, J.O., Lee, H.T., Song, J.H., Kim, M.S., Yoon, H.S. and Suk-Won Cha, 2017, "Effect of laser-excited ceramic nanoparticles on hardness and porosity of dry-sprayed coating ," CIRP Annals Manufacturing Technology, Elsevier (Netherlands), Vol.66, No.1, pp 519-522 (SCI(E), IF 2.893, JCR Impact Factor Rank: 7/44 (2016) in ENGINEERING, INDUSTRIAL).
[4] Chu, W.S., Kim, M.S., Lee, K.T., Bhandari, B., Lee, G.Y., Yoon, H.S., Kim, H.S., Park, J.I., Bilegt, E., Lee, J.Y., Song, J.H., Park, G. H., Bhandari, P., Lee, C.S., Song, C. and Ahn, S.H., 2017, "Design and Performance Evaluation of Korean Traditional Heating System - Ondol: Case Study in Nepal ," Energy and Buildings, Elsevier, Vol. 138, pp. 406-414, March 1 (SCIE, IF 2.973, JCR Rank 6/124 in Engineering, Civil, ISSN 0378-7788, Updated 2/2), Top 5% in ENGINEERING, CIVIL.
[3] Chu, W.S., Kim, M.S., Jang, K.H., Song, J.H., Rodrigue, H., Chun, D.M., Cho, Y. T., Ko, S. H., Cho, K. J., Cha, S. W., Min, S.K., Jeong, S. H., Jeong, H., Lee, C. M., Chu, C. N. and Ahn, S.H., 2016, "From Design for Manufacturing (DFM) to Manufacturing for Design (MFD) via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift," International Journal of Precision Engineering and Manufacturing-Green Technology, KSPE, Springer, Vol. 3, No. 2, pp. 209-222, April.
[2] Park, S.I., Kim, S., Choi, J.O., Song, J.H., Ahn, S.H. and Taya, M., 2015, "Low-cost fabrication of WO3 films using a room temperature and low-vacuum air-spray based deposition system for electrochromic device applications," Thin Solid Films, Elsevier (Netherland), Vol. 589, pp. 412-418, (SCI, IF 1.759, DOI:10.1016/j.tsf.2015.05.070, ISSN 0040-6090, JCR Impact Factor Rank: 6/18(2013) in Materials science, Coatings & Films), Google Scholar citation: 5.
[1] Chu, W.S., Kim, C.S., Lee, H.T., Choi, J.O., Park, J.I., Song, J.H., Jang, K.H., and Ahn, S.H., 2014, "Hybrid Manufacturing in Micro/Nano Scale: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 1, No. 1, pp. 75-92, January (SCIE, ISSN: 2234-7593), Springer Award: Most Cited Article.
CATEGORY : INTERNATIONAL CONFERENCE
[18] Ahn, S.H., Choi, J.O., Lee, H.T., Song, J.H., Kim, M.S., Yoon, H.S. and Suk-Won Cha, 2017, "Effect of laser-excited ceramic nanoparticles on hardness and porosity of dry-sprayed coating," 67th CIRP General Assembly, CIRP, August 20-26, Lugano, Switzerland, Part I presentation.
[17] Song, J.H., Lee, H.T., Kim, M.S., Wang, Y., Ahn, S.H., 2017, "Control of Thin Film Porosity in Nano Particle Deposition System using Novel Laser Sintering Process," International Symposium on Green Manufacturing and Applications (ISGMA) 2017, Korean Society of Precision Engineering and etc., June 27 ~ July 1, Hwabaek International Convention Center (HICO), Gyeongju, Korea.
[16] Song, J.H., Ahn, S.H., Wang, Y., 2017, "Molecular Dynamics Study of Nanoparticles Sintering in Laser Assisted Deposition Process ," 4th World Congress on Integrated Computational Materials Engineering (ICME 2017), The Minerals, Metals & Materials Society, May 21-25, Marriott Ann Arbor Ypsilanti at Eagle Crest, Ypsilanti, Michigan, USA.
[15] Song, J.H., Choi, K.H., Dai, R., Choi, J.O., Ahn, S.H., and Wang, Y., 2016, "Controlled Kinetic Monte Carlo Simulation of Laser Sintering in Nano Particle Deposition Systems," Manufacturing Science and Engineering Conference 2016 (MSEC 2016), American Society of Mechanical Engineers (ASME), June 27- July 1, Virginia Tech, Blacksburg, VA, USA.
[14] Ko, M., Chan, S., Song, J.H., Wang, Y., 2015, "Cost Analytics Service for Cybermanufacturing," Joint Sandia-Georgia Tech Materials Focus Area Kick-Off Meeting, Georgia Institute of Technology & Sandia National Laboratories, December 9-10, Georgia Institute of Technology Manufacturing Institute (GTMI), Atlanta, GA, USA.
[13] Ko, M., Chan, S., Song, J.H., Wang, Y., 2015, "Cost Analytics Service for Cybermanufacturing," The 3rd Annual Industry Partners Symposium 2015, Georgia Tech Manufacturing Institute (GTMI), November 10, Georgia Tech, Atlanta, Ga, USA.
[12] Song, J.H., Choi, K.H., Dai, R., Choi, J.O., Ahn, S.H., Wang, Y., 2015, "Simulation of Laser Sintering in Nano Particle Deposition System," Joint Sandia-Georgia Tech Materials Focus Area Kick-Off Meeting, Georgia Institute of Technology & Sandia National Laboratories, December 9-10, Georgia Institute of Technology Manufacturing Institute (GTMI), Atlanta, GA, USA.
[11] Song, J.H., Choi, K.H., Dai, R., Choi, J.O., Ahn, S.H., Wang, Y., 2015, "Simulation of Laser Assisted Nano Particle Deposition," The 3rd Annual Industry Partners Symposium 2015, Georgia Tech Manufacturing Institute (GTMI), November 10, Georgia Tech, Atlanta, Ga, USA.
[10] Kim, M., Song, J.H., Kim, H.J., Ahn, S.H., 2015, "Robust Design of Smart Soft Composite Actuator Using Taguchi Method," International Symposium on Green Manufacturing and Application (ISGMA 2015), Korean Society of Precision Engineering (KSPE), June 23-27, Shangri-La Hotel, Qingdao, China.
[9] Park, S.I., Nakama, S., Song, J.H., Chu, W.S. and Ahn, S.H., 2015, "Direct Patterning of Electrochromic Display," International Symposium on Green Manufacturing and Application (ISGMA 2015), Korean Society of Precision Engineering(KSPE), June 23-27, Qingdao, China.
[8] Lee, H.T., Yoon, H.S., Jang, K.H., Kim, C.S., Choi, J.O., Kim, S.Y., Song, J.H., and Ahn, S.H., 2014, "In-situ nanomechanical property test for Barium Titanate structure fabricated by Nano Particle Deposition System," International Symposium on Green Manufacturing and Applications (ISGMA) 2014, Korean Society of Precision Engineering and etc., June 24-28, Busan Paradise hotel, Busan, Korea.
[7] Khare, V., Poudel, S.R., Kim, S.Y., Song, J.H., Lee, C.S. and Ahn, S.H., 2014, "Synthesis and Characterization of Ionic Liquid Mediated Reduced Graphene Oxide-TiO2 Hybrid Material for DSSC," ISGMA 2014, 24th~28th June, Busan Paradise hotel, Busan, Korea.
[6] Song, J.H., Kim, S.Y., Poudel, S.R., Song, D.S., Khare, V., Ahn, S.H., 2014, "Developing Green Hybrid Nano Materials based Coated Sand for Nano Filtration Application," ISGMA 2014, 24th~28th June, Busan Paradise hotel, Busan, Korea.
[5] Song, J.H., Kim, S.Y., Jang, K.H., Seung-Kyu Yang, Lee, C.S., Khare, V., Ahn, S.H., 2014, "On The Study of Surface Modified TiO2 Nanowire (SMoTiN) and SMoTiN-QD Hybrid Materials for Dye Sensitized Solar Cell," 2014 MRS Spring Meeting & Exhibit, 21th~25th April, San Francisco, California.
[4] Yoon, H.S., Kim, S.Y., Song, J.H., Choi, J.O., Jang, K.H., Lee, H.T. and Ahn, S.H., 2014, "Selective patterning of Nano Particle Deposition System (NPDS) through surface treatment on substrate," International Symposium on Green Manufacturing and Applications (ISGMA) 2014, Korean Society of Precision Engineering and etc., June 24~28, Busan Paradise hotel, Busan, Korea.
[3] Kim, S.Y., Khare, V., Song, J.H., Poudel, S.R. and Ahn, S.H., 2014, "Multiscale Water Filtration Using Novel Coated Sand Material in a Column Bed Reactor," ISGMA 2014, 24th~28th June, Busan Paradise hotel, Busan, Korea.
[2] Lee, G.Y., Chu, W.S., Lee, K.T., Bhandari, B., Kim, M.S., Kim, H.S., Park, J.I., Bilegt, E., Lee, J.Y., Yoon, H.S., Park, G.H., Min, K.W., Kang, Y.S., Song, J.H., Song, C.K., Lee, C.S., Ahn, S.H. et al., 2013, "An Optimal Design and Performance Evaluation of Korean Traditional Ondol System in Varing Gorae Geometry Application of Goguryeo Style Jjok Gudeul," International Symposium on Green Manufacturing and Application (ISGMA 2013), Korean Society of Precision Engineering and etc., June 25-29, Ohau, Hawaii, USA.
[1] Lee, K.T., Bhandari, B., Chu, W.S., Lee, G.Y., Yoon, H.S., Lee, J.Y., Bilegt, E., Park, J.I., Kim, M.S., Song, J.H., C. S. Lee, C. K. Song, Ahn, S.H., et al., 2013, "Installation of off-grid hybrid power generation system and smart grid in remote mountainous village of Nepal," International Symposium on Green Manufacturing and Applications (ISGMA 2013), Korean Society for Precision Engineering (KSPE), June 26-29, Honolulu, Hawaii, USA.
CATEGORY : DOMESTIC CONFERENCE
[13] 송지현, Wang. Y., 안성훈, 2017, "레이저 조사에 의한 Al2O3 나노입자 에어로졸의 열역학적 특성 분석," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 17일~19일, 라마다프라자 제주호텔, 제주.
[12] 송지현, 안성훈, Wang, Y., 2016, "Thermal analysis of laser sintering in particle deposition system: A molecular dynamics study," Korea Global PhD Fellows 2016 학술대회 (2016 Korea Global PhD Fellows Annual Conference: Beyond Disciplinary Boundaries), 한국글로벌박사펠로우즈 (KGPF), 12월 21일, 정부세종컨벤션센터 (SCC), 세종특별자치시 .
[11] 최정오, 송지현, 안성훈, 2015, "레이저와 건식 입자 분사적층 시스템을 사용한 하이브리드 적층 공정 개발," 한국정밀공학회 추계학술대회, 12월 17일~18일, 하이원리조트, 태백.
[10] 송지현, 김호진, 최정오, 이현택, 윤해성, 안성훈, 2015, "다재료 마이크로/나노 패턴 표면의 제작 공정 개발," 대한기계학회 춘계학술대회 마이크로/나노공학 부문, 5월 21일~22일, BEXCO, 부산.
[9] 김민철, 안성훈, 송지현, 김호진, 2015, "지능형연성복합재 구동기의 견실 설계: 다구치 방법," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 13~15일, 제주 라마다프라자제주호텔, 제주.
[8] 송지현, 안성훈, 최정오, 이현택, 윤해성, 김호진, 2015, "나노스케일 3차원 프린팅 시스템과 탬플릿 스트리핑 방법을 이용한 마이크로/나노 패터닝 표면의 제작 및 평가," 한국정밀공학회 2015년도 춘계학술대회, 5월 13일~15일, 제주 라마다프라자제주호텔, 제주.
[7] 김민철, 김종원, 송지현, 김호진, 안성훈, 2015, "다구치 방법을 이용한 인공근육용 지능형연성복합재 구동기의 견실 설계," 한국 CAD/CAM 학회 2015년 동계학술대회, 2/4(수)-6(금), 2015, 휘닉스파크, 평창.
[6] 송지현, 안성훈, 윤해성, 이길용, 이현택, 2014, "AFN Printing을 이용하여 제작한 다중 은 팁 정전구동기의 활용," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 29~31일, 창원 CECO(창원컨벤션센터), 창원.
[5] 박성익, 안성훈, 최정오, 송지현, 김수연, 타야 미노루, 2014, "WO3 증착을 위한 NPDS의 공정조건 및 ECW 패키징에 관한 연구," 한국정밀공학회 추계학술대회, 한국정밀공학회, 10월 29~31일, 창원컨벤션센터, 창원.
[4] 추원식, 김충수, 이현택, 최정오, 박재일, 송지현, 장기환, 안성훈, 2014, "정밀가공을 위한 하이브리드 제조 공정의 리뷰," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 14~16일, 제주 라마다프라자제주호텔, 제주.
[3] 박성익, 안성훈, 최정오, 송지현, 김수연, 타야 미노루, 2014, "NPDS를 이용한 WO3 증착 및 전기변색 효과에 관한 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 14~16일, 제주 라마다프라자제주호텔, 제주, 최우수논문상.
[2] 송지현, 안성훈, 윤해성, 이길용, 이현택, 2014, "펄스 방식 나노 입자 적층 시스템을 이용한 정전 구동기의 제작," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 14~16일, 제주 라마다프라자제주호텔, 제주.
[1] 이현택, 이길용, 김충수, 최정오, 박재일, 송지현, 장기환, 이건우, 안성훈, 2014, "나노스케일 3차원 프린팅 시스템," 한국CAD/CAM학회 학술발표회, 한국CAD/CAM 학회, 2월 12~14일, 휘닉스파크, 평창.
CATEGORY : INVITED PRESENTATION
[1] Chu, W.S., Kim, C.S., Lee, H.T., Choi, J.O., Park, J.I., Song, J.H., Jang, K.H., and Ahn, S.H., 2015, "하이브리드 제조 공정: 마이크로/나노스케일," 경남생산기계산업 기술고도화사업-경남나노광학산업 기업지원사업 중간보고회 및 통합 기술교류회, 창원, 4월 16일, 기술세미나(생산기계).
CATEGORY : PATENT
[1] 안성훈, 김선진, 송지현, 장기환, 이종화, 2013, "발 동작만으로 신발의 신발끈을 조이고 느슨하게 할 수 있는 신발끈 조임 장치," 출원번호: 10-2013-0106941, 출원일자: 2013.09.06, (수정중~15.10.31).
CATEGORY : HONORS/AWARDS
[4] Chu, W.S., Kim, C.S., Lee, H.T., Choi, J.O., Park, J.I., Song, J.H., Jang, K.H. and Ahn, S.H., 2016, "Most Cited Article Award, 2014 to 2015 - Hybrid Manufacturing in Micro/Nano Scale: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 1, No. 1, pp. 75-92, 2014.
[3] Park, S.I., Ahn, S.H., Choi, J.O., Song, J.H., 김수연, 타야 미노루, 2014, "NPDS를 이용한 WO3 증착 및 전기변색 효과에 관한 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 14~16일, 제주 라마다프라자제주호텔, 제주, 최우수논문상.
[2] Song, J.H., 2014, "글로벌 박사 양성사업(Global Ph.D. Fellowship)," 한국연구재단, 2014.03~.
[1] Lee, G.Y., Lee, K.T., Bhandari, B., Chu, W.S., Yoon, H.S., Lee, J.Y., Bilegt, E., Park, J.I., Kim, M.S., Kim, H.S., 민경욱, 강영석, 박지훈, Song, J.H., 유은지, 김민희, 장문혁, 김범호, Maskey, A., 김형섭, 조단이, 최다현, 김동휘, 박철환, 박찬동, 한현석, 심재환, 한성길, 박지환, 조원희, 문준영, 송세용, 신현민, Bhandari, P., Ahn, S.H., Lee, C.S., 송철기, 2013, "국토교통부장관상(대상), Nepal Solar Volunteer Corps," 제5회 소외된 90%를 위한 창의설계 경진대회, 한양대학교, 한밭대학교, 한동대학교, (사)나눔과기술, 5월 24일, 한양대학교, Award from Minister of Land, Infrastructure and Transport, Korea.