IDIM Member Publications
Sankee Min

[5] Yoon, H.S., Lee, J.Y., Kim, M.S., Kim, E.S., Shin, Y.J., Kim, S.Y., Min, S.K., Ahn, S.H., 2020, "Power Consumption Assessment of Machine Tool Feed Drive Units," International Journal of Precision Engineering and Manufacturing-Green Technology volume 7, pages455–464 (SCIE, IF 4.561, ISSN 2288-6206).
[4] Lee, G.Y., Kim, M., Quan, Y.J., Kim, M.S., Kim, T.J.Y., Yoon, H.S., Min, S.K., Kim D. H., Mun, J.W., Oh, J.W., Choi, I.G., Kim, C.S., Chu, W.S., Yang, J., Bhandari, B., Lee, C.M., Ihn, J.B. and Ahn, S.H., 2018, "Machine health management in smart factory: A review," Journal of Mechanical Science and Technology, Vol. 32, No. 3, pp. 987-1009, March (SCI(E), IF 1.128, DOI: 10.1007/s12206-018-0201-1, ISSN: 1738-494X), Invited Paper.
[3] Yoon, H.S., Lee, H.T., Jang, K.H., Kim, C.S., Park, H., Kim, D.W., Lee, K., Min, S.K., and Ahn, S.H., 2017, "CAD/CAM for scalable nanomanufacturing: a network-based system for hybrid 3D printing," Microsystems & Nanoengineering, Nature publishing group, Vol. 3, P17072, September (SCIE, IF 5.071, DOI: doi:10.1038/micronano.2017.72, ISSN: 2055-7434).
[2] Chu, W.S., Kim, M.S., Jang, K.H., Song, J.H., Rodrigue, H., Chun, D.M., Cho, Y. T., Ko, S. H., Cho, K. J., Cha, S. W., Min, S.K., Jeong, S. H., Jeong, H., Lee, C. M., Chu, C. N. and Ahn, S.H., 2016, "From Design for Manufacturing (DFM) to Manufacturing for Design (MFD) via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift," International Journal of Precision Engineering and Manufacturing-Green Technology, KSPE, Springer, Vol. 3, No. 2, pp. 209-222, April, Most Cited Article Award, 2016 to 2017.
[1] Lee, J.Y., Ahn, S.H., Shin, Y.J., Kim, M.S., Kim, E.S., Yoon, H.S., Kim, S.Y., Yoon. Y. C., Min, S.K., 2016, "A simplified machine-tool power-consumption measurement procedure and methodology for estimating total energy consumption," ASME, Journal of Manufacturing Science and Engineering, ASME(USA), Vol. 138, Issue. 5, May, (SCI(E), IF 1.087, JCR Impact Factor Rank : 29/39 (2013) in ENGINEERING, MANUFACTURING, DOI:10.1115/1.4031713, ISSN: 1087-1357).
[2] Kim, E.S., Yoon, H.S., Lee, J.Y., Kim, M.S., Shin, Y.J., Ahn, S.H., Min, S.K., David Dornfeld, 2015, "Acceleration and Deceleration Characteristics of Power Consumption on Machine Tool Feed Drive," The 8th International Conference on Leading Edge Manufacturing in 21st Century, October 18-22, Kyoto Research Park, Kyoto, Japan.
[1] Kim, M.S., Yoon, H.S., Lee, J.Y., Kim, E.S., Shin, Y.J., Kim, S.Y., Min, S.K., Ahn, S.H., 2015, "Simplified Energy Measurement Methods for Comparison of Hardware Efficiency of Various Machine Tools," The 18th International Symposium on Advances in Abrasive Technology (ISAAT 2015), 4-7 October, Jeju.
[3] 김민수, 안성훈, 민상기, 윤해성, 이장엽, 김은섭, 신용준, 윤여찬, 2015, "밀링 머신의 소비전력 라벨링과 사례 연구," 한국정밀공학회 춘계학술대회, 한국정밀공학회, 5월 13~15일, 제주 라마다프라자제주호텔, 제주.
[2] 김민수, 윤해성, 이장엽, 김은섭, 신용준, 김성용, 윤여찬, 민상기, 안성훈, 2015, "밀링 머신 하드웨어 구성 요소의 소비전력 모델링," 한국생산제조시스템학회 2015년도 춘계학술대회,한국생산제조시스템학회, 4월28일~30일, 대전 ICC호텔, 대전.
[1] 김은섭, 민상기, 윤해성, 이장엽, 김민수, 신용준, 김성용, 안성훈, 2015, "고속전력량계를 이용한 공작기계 이송계의 가속 및 감속 영향 분석," 한국생산제조시스템학회 2015년도 춘계학술대회, 한국생산제조시스템학회, 4월28일~30일, 대전 ICC호텔, 대전.
[1] Ahn, S.H., Min, S.K.,Lee, J.Y., Kim, M.S., Yoon, H.S., 2015, "공작기계 전력 소비량 모델의 현재와 전망," NGV세미나, 현대위아 기술연구소, 의왕, 6/18.