인명 검색은 member 페이지에서 가능합니다.
* Copyright of the publications is belong to each publisher. Pdf files in this website are only for members.
[241]  Song, J.H., Ahn, S.H., Wang, Y., TBD, "Molecular dynamics study of nanoparticles sintering mechanism in laser assisted deposition process," TBD (In preparation, Updated:12/22).
[240]  Song, J.H., Choi, K.H., Dai, R., Choi, J.O., Ahn, S.H., Wang, Y., TBD, "Controlled kinetic monte carlo simulation of laser sintering in nano particle deposition system," TBD (In preparation, Updated: 12/22).
[239]  Kim, N.G., Park, H.B., Iakovleva, A., Chu, W.S., and Ahn, S.H., TBD, "The morphing flap of unmanned aerial vehicle using smart soft composite actuator," Composite part B (TBD).
[238]  Kim, M.S., Yoon, H.S., Kim, E.S., Lee, J.Y., Shin, Y.J., Kim, S.Y., Yoon, Yeo-Chan, Cho, Jung-Hoon, Min, S.K., Ahn, S.H., TBD, "Simplified Evaluation Methodology of Power Consumption for Milling Machines," TBD (In preparation, Updated: 06/15) .
[237]  Kim, M.S., Lee, K.T., Jeong-Hyun Kim, Jongbae Kim, Ahn, S.H., TBD, "Information Input Assistive Device Considering Motion Limitation of Cerebral Palsy," (In preparation, Updated: 3/4).
[236]  Lee, G.Y., Kim, M., Quan, Y.J., Kim, M.S., Kim, T.J.Y., Yoon, H.S., Min, S.K., Kim D. H., Mun, J.W., Oh, J.W., Choi, I.G., Kim, C.S., Chu, W.S., Yang, J., Bhandari, B., Lee, C.M., Ihn, J.B. and Ahn, S.H., Submitted, "Machine health management in smart factory: A review," Journal of Mechanical Science and Technology.
[235]  Kim, H., Park, Y., Chu, W.S., Ahn, S.H., Chun, D.M. and Lee, C.S., Submitted, "Kinetic spraying of silver nanowire blended graphite powder to fabricate transparent conductive electrode and their application in electrochromic device," Surface & Coatings Technology (SCIE, ISSN: 0257-8972, IF 2.589).
[234]  Song, J.H., Sonkaria S., Ahn, S.H., Lee, C.S., Khare, V., Submitted, "Tuning inter-crystalline void-like defects in nanowire clusters to TiO2 quantum wires with enhanced photocatalytic performance," Applied Catalysis B: Environmental (SCI, Submitted, Updated:12/22).
[233]  Lee, K.T., Bhandari, B., Kim, E.S., Kim, M.S., Poudel, S.R., Chu, W.S., Y. M. Cho, and Ahn, S.H., Submitted, "Design Guide and Cost Estimation of Micro Hydro-Solar-Wind Hybrid Renewable Energy System for off-grid villages," Renewable Energy (SCI(E), Submitted, Updated: 4/9).
[232]  Pandey, J.K., Hitoshi Takagi, M.S.A. Bistamam, Antonio Norio Nakagaito, Ahn, S.H. , Submitted, "Bio-inspired Reinforcement of Biodegradable Polycaprolactone (PCL)-Starch Matrix by Nano-cellulose," Composite Science and Technology.
[231]  Yoon, H.S., Lee, H.T., Jang, K.H., Kim, C.S., Park, H., Kim, D.W., Lee, K., Min, S.K., and Ahn, S.H., Revised, "A network-based system for hybrid 3D printing," TBD (Updated: 5/20).
[230]  Yoon, H.S., Lee, J.Y., Kim, M.S., Kim, E.S., Shin, Y.J., Kim, S.Y., Min, S.K., and Ahn, S.H., Revised, "Power consumption assessment of machine tool feed drive units," Measurement (Submitted, Updated: 5/20).
[229]  Wang, W. and Ahn, S.H., Accepted, "SMA-based Soft Gripper with Variable Stiffness for Compliant and Effective Grasping," Soft Robotics (IF 8.649).
[228]  Abhishek Sharm, Surajit Mondal, Amit Kumar Mondal, Soumadeep Baksi, Ravi Kumar Patel, Chu, W.S. and Pandey, J.K., 2017, "3D printing: It’s microfluidic functions and environmental impacts," International Journal of Precision Engineering and Manufacturing-Green Technology, Springer, Vol. 4, No. 3, pp. 323-334 (SCIE, ISSN: 2288-6206, IF: 3.494, Top 10% in Manufacturing, Engineering) July 12th.
[227]  Pawar, R.C., Kang, S.H., Park, J.H., Kim, J.H., Ahn, S.H. and Lee, C.S., 2017, "Evaluation of a multi-dimensional hybrid photocatalyst for enrichment of H2 evolution and elimination of dye/non-dye pollutants," Catalysis Science & Technology, Vol. 7, Issue 12, pp. 2579-2590 (2017).
[226]  Khare, V., Sonkaria, S, Lee, G.Y., Ahn, S.H.* and Chu, W.S.* , 2017, "From 3D to 4D Printing - Design, Material Fabrication for Multi-Functional Multi-Materials," International Journal of Precision Engineering and Manufacturing-Green Technology, Springer, Vol. 4, No. 3, pp. 291-299 (SCIE, ISSN: 2288-6206, IF: 3.494, Top 10% in Manufacturing, Engineering), July 12th.
[225]  Ahn, S.H., Choi, J.O., Lee, H.T., Song, J.H., Kim, M.S., Yoon, H.S. and Suk-Won Cha, 2017, "Effect of laser-excited ceramic nanoparticles on hardness and porosity of dry-sprayed coating ," CIRP Annals Manufacturing Technology, Elsevier (Netherlands), Vol.66, No.1, pp 519-522 (SCI(E), IF 2.893, JCR Impact Factor Rank: 7/44 (2016) in ENGINEERING, INDUSTRIAL).
[224]  Rodrigue, H., Wang, W., Kim, D.R. and Ahn, S.H., 2017, "Curved Shape Memory Alloy-based Soft Actuators and Application to Soft Gripper," Composite Structures, Elsevier, Vol. 176, pp. 398-406, 15 September 2017 (SCI, IF 3.858, https://doi.org/10.1016/j.compstruct.2017.05.056).
[223]  Han, M.W. and Ahn, S.H., 2017, "Blooming Knit Flowers: Loop-linked Soft Morphing Structures for Soft Robotics," Advanced Materials, Wiley-VCH (Germany), Vol. 29, No. 13, 1606580 (SCI, IF 19.791, JCR Rank 2/145 in Chemistry, Physical, DOI: 10.1002/adma.201606580, ISSN: 1521-4095), Front Cover of Adv. Mat., Featured at MBC, YTN, Chosun Biz, Donga, etc.
[222]  Wang, W., Li, C.Z., Rodrigue, H., Yuan, F.P., Han, M.W., Cho, M.H. and Ahn, S.H., 2017, "Kirigami/Origami-based Soft Deployable Reflector for Optical Beam Steering," Advanced Functional Materials, Volume 27, Issue 7, No.: 1604214, February 17, 2017 (SCI, IF 12.124, DOI: 10.1002/adfm.201604214, ISSN: 1616-3028). , Covered by Advanced Science News.
[221]  Kim, H., Choi, D., Kim, K., Chu, W.S., Chun, D.M., Ahn, S.H. and Lee, C.S., 2017, "Effect of particle size and amorphous phase on the electrochromic properties of kinetically deposited WO3 films," Solar Energy Materials and Solar Cells, Article in press (SCI, ISSN: 0927-0248, IF 4.732).
[220]  Wang, W., Kim, N.G., Rodrigue, H. and Ahn, S.H., 2017, "Modular assembly of soft deployable structures and robots," Materials Horizons, Royal Society of Chemistry, 4, 367-376 (IF 10.706, DOI: 10.1039/C6MH00550K, ISSN 2051-6347), Front Cover, Covered by Phys.org, Daily Mail, International Business Times, Siliconrepublic, Electronics360 (IEEE), AllNews / NewsWord, the USA Times, OMG25, MashableAsia, Science Alert.
[219]  Lee, H.T., Kim, H.J., Kim, C.S., Kenji Gomi, Minoru Taya, Shuhei Nomura and Ahn, S.H., 2017, "Site-Specific Characterization of Beetle Horn Shell with Micromechanical Bending Test in Focused Ion Beam System," ACTA Biomaterialia, Elsevier (Netherlands), Vol.57, pp.395-403, July 15, (SCI, IF 6.319, DOI: 10.1016/j.actbio.2017.04.026, ISSN: 1742-7061, JCR Impact factor Rank 3/77 (2016) in Engineering, Biomedical), Top 4% in Engineering, Biomedical.
[218]  Yoon, H.S., Jang, K.H., Kim, E.S., Lee, H.T., and Ahn, S.H., 2017, "Hybrid 3D Printing by Bridging Micro/Nano Processes," Journal of Micromechanics and Microengineering, IOP Publishing (England), Vol. 27, No. 6, P.065006, June (SCI, IF 1.768, DOI: 10.1088/1361-6439/aa6758, ISSN 0960-1317, Publication date (Web): April 27, JCR Impact Factor Rank: 44/135 (2015) in MECHANICS).
[217]  Rodrigue, H., Wang, W., Han, M.W., Kim, T.J.Y. and Ahn, S.H., 2017, "An Overview of Shape Memory Alloy-coupled Actuators and Robots," Soft Robotics, Vol.4, issue 1, p3-15., (SCI(E), IF 8.649, 1/25 in Robotics), High Impact Article.
[216]  Yoon, H.S., Lee, H.T., Kim, E.S., and Ahn, S.H., 2017, "Direct printing of anisotropic wetting patterns using aerodynamically focused nanoparticle (AFN) printing," Applied Surface Science, Elsevier (Netherlands), Vol. 396, 28 February 2017, Pages 1450?457 (SCI, IF 3.150, DOI: 10.1016/j.apsusc.2016.11.187, ISSN: 0169-4332, JCR Impact Factor Rank 1/18 (2015) in MATERIAL SCIENCE, COATINGS & FILMS), Top 6% in MATERIAL SCIENCE, COATINGS & FILMS.
[215]  Chu, W.S., Kim, M.S., Lee, K.T., Bhandari, B., Lee, G.Y., Yoon, H.S., Kim, H.S., Park, J.I., Bilegt, E., Lee, J.Y., Song, J.H., Park, G. H., Bhandari, P., Lee, C.S., Song, C. and Ahn, S.H., 2017, "Design and Performance Evaluation of Korean Traditional Heating System - Ondol: Case Study in Nepal ," Energy and Buildings, Elsevier, Vol. 138, pp. 406-414, March 1 (SCIE, IF 2.973, JCR Rank 6/124 in Engineering, Civil, ISSN 0378-7788, Updated 2/2), Top 5% in ENGINEERING, CIVIL.
[214]  Kim, H.S., Lee, J.Y., Chu, W.S.*, and Ahn, S.H.*, 2017, "Design and Fabrication of Soft Morphing Ray Propulsor: Undulator and Oscillator," Soft Robotics, Vol.4, issue 1, p49-60., (SCI(E), IF 6.130, 1/25 in Robotics), High Impact Article.
[213]  Kim, M., Lee, J.Y., Shin, Y.J., Chu, W.S. and Ahn, S.H., 2017, "Pulse Width Modulation as Energy-Saving Strategy of Shape Memory Alloy Based Smart Soft Composite Actuator," International Journal of Precision Engineering and Manufacturing, Volume 18, Issue 6, pp 895–901, June 2017 (SCI(E), IF 1.497, DOI: 10.1007/s12541-017-0106-4, ISSN: 2234-7593, JCR IF Rank: 62/130 (2016) in ENGINEERING, MECHANICAL).
[212]  Yoon, H.S., Kim, C.S., Lee, H.T., and Ahn, S.H., 2017, "Advanced scanning paths for focused ion beam milling," Vacuum, Elsevier (Netherlands), Vol.143, pp.40-49, September (SCI, IF 1.558, DOI: 10.1016/j.vacuum.2017.05.023, ISSN: 0042-207X, JCR Impact Factor Rank 146/271 (2015) in MATERIALS SCIENCE, MULTIDISCIPLINARY).
[211]  Bhandari, B., Lee, K.T., Chu, W.S., Lee, C.S., Song, C.K., Bhandari, P. and Ahn, S.H., 2017, "Socio-Economic Impact of Renewable Energy-Based Power System in Mountainous Village of Nepal," International Journal of Precision Engineering and Manufacturing–Green Technology, Vol. 4, No. 1, January (SCIE, ISSN: 2286-6206, IF 2.545).
[210]  Pawar, R.C., Kang, S.H., Park, J.H., Kim, J.H., Ahn, S.H. and Lee, C.S., 2016, "Room-temperature synthesis of nanoporous 1D microrods of graphitic carbon nitride (g-C3N4) with highly enhanced photocatalytic activity and stability," Scientific Reports, Vol. 6, Article number 31147 .
[209]  Kim, H.S., Park, Y.C., Choi, D.H., Ahn, S.H. and Lee, C.S., 2016, "Novel fabrication of an electrochromic antimony-doped tin oxide film using a nanoparticle deposition system," Applied Surface Science, Vol. 377, pp. 370-375.
[208]  Pawar, R.C., Park, T.J., Choi, D.H., Jeon, K.W., Ahn, S.H. and Lee, C.S., 2016, "Stable and magnetically reusable nanoporous magnetite micro/nanospheres for rapid extraction of carcinogenic contaminants from water," RSC Advances, Vol. 6, Issue 41, pp.34297-34311.
[207]  Kim, H.S., Yang, S.K., Ahn, S.H. and Lee, C.S., 2016, "Effect of particle size on various substrates for deposition of NiO film via nanoparticle deposition system," Thin Solid Films, Vol. 600, pp. 109–118.
[206]  Pawar, R.C., Son, Y.H., Kim, J.R., Ahn, S.H. and Lee, C.S., 2016, "Integration of ZnO with g-C3N4 structures in core–shell approach via sintering process for rapid detoxification of water under visible irradiation," Current Applied Physics, Vol. 16, Issue 1, Pages 101–108.
[205]  Pawar, C.R., Kang, S.H., Park, J.H., Kim, J.H., Ahn, S.H., Lee, C.S., 2016, "Room-temperature synthesis of nanoporous 1D microrods of graphitic carbon nitride (g-C3N4) with highly enhanced photocatalytic activity and stability," Scientific Reports, Nature publishing group (England), Vol. 6, No. 31147, August (SCI, DOI: 10.1038/srep31147, ISSN: 2045-2322).
[204]  Pawar, C.R., Park, T.j.,Choi, D.H.,Jeon K.W., Ahn, S.H., and Lee, C.S., 2016, "Stable and magnetically reusable nanoporous magnetite micro/nanospheres for rapid extraction of carcinogenic contaminants from water," RSC Advances, ROYAL SOC CHEMISTRY(England), Vol.6., pp.34297-34311, March, (SCIE, IF 3.289).
[203]  Bhandari, B.,Ahn, S.H., Ahn, T. B, 2016, "Optimization of hybrid renewable energy power system for remote installations: Case studies for mountain and island," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 17, No. 6,pp. 815-822, July 2014, (SCIE, IF 1.075, ISSN: 2234-7593).
[202]  Yoon, H.S., Kim, M.S., Jang, K.H., and Ahn, S.H., 2016, "Future perspectives of sustainable manufacturing and applications based on research databases," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 17, No. 9, pp. 1249-1263, September (SCI(E), IF 1.075, DOI: 10.1007/s12541-016-0150-5, ISSN: 2234-7593, JCR Impact Factor Rank: 67/132 (2015) in ENGINEERING, MECHANICAL).
[201]  Jeong, H and Chu, W.S., 2016, "Preface for the Special Issue of Hybrid Manufacturing," International Journal of Precision Engineering and Manufacturing-Green Technology, KSPE, Springer, Vol. 3, No. 2, p. 145, April.
[200]  Kim, H. S., Park, Y. C., Choi, D. H., Ahn, S.H., Lee, C.S., 2016, "Novel Fabrication of an Electrochromic Antimony-doped Tin Oxide Film using a Nanoparticle Deposition System," Applied Surface Science (Volumes 371 - 377 (2016)).
[199]  Kim, H.I., Han, M.W., Song, S.H., and Ahn, S.H., 2016, "Soft Morphing Hand Driven by SMA Tendon Wire," Composites Part B: Engineering, Elsevier (Netherlands), Vol. 105, 15 November 2016, pp. 138-148, November (SCI, IF 4.727, JCR Rank 3/85 in Engineering, Multidisciplinary, DOI: 10.1016/j.compositesb.2016.09.004, ISSN 1359-8368).
[198]  Chu, W.S., Kim, M.S., Jang, K.H., Song, J.H., Rodrigue, H., Chun, D.M., Cho, Y. T., Ko, S. H., Cho, K. J., Cha, S. W., Min, S.K., Jeong, S. H., Jeong, H., Lee, C. M., Chu, C. N. and Ahn, S.H., 2016, "From Design for Manufacturing (DFM) to Manufacturing for Design (MFD) via Hybrid Manufacturing and Smart Factory: A Review and Perspective of Paradigm Shift," International Journal of Precision Engineering and Manufacturing-Green Technology, KSPE, Springer, Vol. 3, No. 2, pp. 209-222, April.
[197]  Kim, H.S., Yang, S., Ahn, S.H. and Lee, C.S., 2016, "Effect of particle size on various substrates for deposition of NiO film via nanoparticle deposition system," Thin Solid Films, Vol. 600, 1 February 2016, pp. 109–118.
[196]  Rajendra C. Pawar, Yeonho Son, Jongryul Kim, Ahn, S.H., Lee, C.S., 2016, "Integration of ZnO with g-C3N4 structures in coreeshell approach via sintering process for rapid detoxification of water under visible irradiation," Current Applied Physics, Volume 16, Issue 1, January 2016, Pages 101–108 (SCI, IF 2.212, ISSN: 1567-1739).
[195]  Song, D.S., Choi, J.O., Ahn, S.H., 2016, "Room-temperature fabrication of flexible thermoelectric generator using dry-spray deposition system," Journal of electronic materials, springer US, pp. 1-5, January, 2016, (SCI, IF 1.798,DOI : 10.1007/s11664-015-4306-3, ISSN : 0361-5235).
[194]  Song, S.H., Lee, J.Y., Rodrigue, H., Choi, I. S., Y. J. Kang and Ahn, S.H., 2016, "35 Hz shape memory alloy actuator with bending-twisting mode," Scientific Reports, Nature publishing group (England), Vol. 6, No. 21118, February (SCI, IF 5.228, DOI: 10.1038/srep21118, ISSN: 2045-2322, JCR Rank 7/63 (2015) in Multidisciplinary Sciences).
[193]  Park, S.I., Quan, Y.J., Kim, S.H., Kim H., Kim S., Chun, D.M., Lee C. S., Taya M., Chu, W.S.* and Ahn, S.H.*, 2016, "A Review on Fabrication Processes for Electrochromic Devices," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 3, No. 4, pp. 397-421 (SCI(E), IF 2.545, JCR Rank 16/132 in Engineering, Mechanical, ISSN: 2288-6206, DOI 10.1007/s40684-016-0049-8).
[192]  Wang, W., Rodrigue, H. and Ahn, S.H., 2016, "Deployable Soft Composite Structures," Scientific Reports, Vol.6, Article number:20869, 19 February 2016, Nature Publishing Group (SCIE, IF 4.259, ISSN: 2045-2322, doi:10.1038/srep20869), Google Scholar citation: 1, IF 5.228, Covered by TechXplore, March 2, 2016.
[191]  Rodrigue, H., Wang, W., Han, M.W., Quan, Y.J. and Ahn, S.H., 2016, "Comparison of Mold Designs for SMA-based Twisting Soft Actuator," Sensors and Actuators A: Physical, Volume 237, 1 January 2016, Pages 96-106, Elsevier (SCI, IF 2.499, JCR Rank 10/56 in Instruments & Instrumentation, ISSN: 0924-4247).
[190]  Wang, W., Rodrigue, H., Kim, H.I., Han, M.W., and Ahn, S.H., 2016, "Soft Composite Hinge Actuator and Application to Compliant Robotic Gripper," Composites Part B: Engineering,Vol. 98, 1 August 2016, Pages 397-405, Elsevier Science ltd (England) (SCI), IF 4.727, doi:10.1016/j.compositesb.2016.05.030, ISSN 1359-8368, JCR Impact Factor Rank 4/85 in Engineering, Multidisciplinary).
[189]  Lee, J.Y., Ahn, S.H., Shin, Y.J., Kim, M.S., Kim, E.S., Yoon, H.S., Kim, S.Y., Yoon. Y. C., Min, S.K., 2016, "A simplified machine-tool power-consumption measurement procedure and methodology for estimating total energy consumption," ASME, Journal of Manufacturing Science and Engineering, ASME(USA), Vol. 138, Issue. 5, May, (SCI(E), IF 1.087, JCR Impact Factor Rank : 29/39 (2013) in ENGINEERING, MANUFACTURING, DOI:10.1115/1.4031713, ISSN: 1087-1357).
[188]  Han, M.W., Rodrigue, H., Cho, S., Song, S.H., Wang, W., Chu, W.S., and Ahn, S.H., 2016, "Woven type Smart Soft Composite for Soft Morphing Car Spoiler," Composites Part B: Engineering, Elsevier (Netherlands), Vol. 86, 1 February 2016, pp. 285-298, February (SCI, IF 4.727, JCR Rank 3/85 in Engineering, Multidisciplinary, DOI: 10.1016/j.compositesb.2015.10.009, ISSN 1359-8368).
[187]  Han, M.W., Rodrigue, H., Kim, H.I., Song, S.H., and Ahn, S.H., 2016, "Shape Memory Alloy/Glass Fiber Woven Composite for Soft Morphing Winglets of Unmanned Aerial Vehicles," Composite Structures, Elsevier (Netherlands), Vol. 140, 15 April 2016, pp. 202-212 (SCI(E), IF 3.858, JCR Rank 5/25 in Materials Science, Composites, DOI:10.1016/j.compstruct.2015.12.051, ISSN: 0263-8223), Top10% in Materials Science, Composites.
[186]  Song, S.H., Lee, H., Lee, J.G., Lee, J.Y., Cho, M. and Ahn, S.H. , 2016, "Design and analysis of a smart soft composite structure for various modes of actuation," Composites Part B: Engineering, Vol. 95, No. 15, pp. 155-165, June (SCI, IF 3.850, JCR Rank 4/85(2015) in Engineering, Multidisciplinary, ISSN 1359-8368), Top 4.7% in Engineering, Multidisciplinary.
[185]  Song, S.H., Kim, M.S., Rodrigue, H., Lee, J.Y., Shim, J.E., Kim, M., Chu, W.S. and Ahn, S.H., 2016, "Turtle mimetic soft robot with two swimming gait," Bioinspiration & Biomimetics, IOP Publishing, Vol.11, No. 3, 036010, May (SCI(E), IF 2.891, DOI: 10.1088/1748-3190/11/3/036010, ISSN: 1748-3182, JCR Impact Factor Rank 2/25(2015) in Robotics), Top 10% in Robotics.
[184]  Rodrigue, H., Cho, S., Han, M.W., Bhandari, B., Shim, J.E. and Ahn, S.H., 2016, "Effect of Twist Morphing Wing Segment on Aerodynamic Performance of UAV," Journal of Mechanical Science and Technology, Vol. 30, No. 1, pp 229-236, Korean Society of Mechanical Engineers, First online: 13 January 2016 (SCI(E), IF 1.128, JCR Rank 87/130 in Engineering, Mechanical, ISSN 1738-494X).
[183]  Kim, E.S., Shin, Y.J., Ahn, S.H., 2016, "The Effects of Moisture and Temperature on the Mechanical Properties of Additive Manufacturing Components: Fused Deposition Modeling," Rapid Prototyping Journal, Vol. 22, Iss. 6 (SCI(E), pp. 887-894, IF 2.031, JCR Impact Factor Rank: 19/130 (2014) in ENGINEERING MECHANICAL).
[182]  Bilegt, E., Yoon, H.S., Lee, H.T., Kim, E.S., Kim, C.S., and Ahn, S.H., 2016, "Design and Evaluation of Micro-Cutting Tools for Local Planarization," International Journal of Precision Engineering and Manufacturing (SCI(E), IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 17, No. 10, pp. 1267-1273, October (SCI(E), IF 1.075, DOI: 10.1007/s12541-016-0151-4, ISSN: 2234-7593, JCR Impact Factor Rank: 67/132 (2013) in ENGINEERING, MECHANICAL).
[181]  Park, J.I., Lee, G.Y., Kim, C.S. and Ahn, S.H., 2016, "Flexible Ceramic-Elastomer Composite Piezoelectric Energy Harvester Fabricated by Additive Manufacturing," Journal of Composite Materials.,The American Society for Composites(U.S.A)., Vol.50, No.12, pp.1573-1579.
[180]  Hong, Y.S., Yoon, H.S., Moon, J.S., Cho, Y.M.*, and Ahn, S.H.*, 2016, "Tool-wear monitoring during micro-end milling using wavelet packet transform and Fisher’s linear discriminant," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 17, No. 7, pp. 845-855, July (SCI(E), IF 1.075, DOI: 10.1007/s12541-016-0103-z, ISSN: 2234-7593, JCR Impact Factor Rank: 67/132 (2015) in ENGINEERING, MECHANICAL).
[179]  Pawar, R.C., Pyo, Y.J., Ahn, S.H. and Lee, C.S., 2015, "Photoelectrochemical properties and photodegradation of organic pollutants using hematite hybrids modified by gold nanoparticles and graphitic carbon nitride," Applied Catalysis B: Environmental Vol. 176–177, pp. 654–666.
[178]  R.C. Pawar, Y.J. Pyo, Ahn, S.H. and Lee, C.S., 2015, "Photoelectrochemical properties and photodegradation of organic pollutants using hematite hybrids modified by gold nanoparticles and graphitic carbon nitride," Applied Catalysis B: Environmental Vol. 176–177, pp. 654–666.
[177]  Huu-Duc Nguyen-Tran, Hyun-Seok Oh, Sung-Tae Hong, Heung Nam Han, Jian Cao, Ahn, S.H. and Chun, D.M., 2015, "A Review of Electrically-Assisted Manufacturing," International Journal of Precision Engineering and Manufacturing-Green Technology, October 2015, Volume 2, Issue 4, pp 365-376.
[176]  Jaehwan Kim, Chu, W.S. and Ahn, S.H., 2015, "Preface for the special issue of ISGMA 2014," International Journal of Precision Engineering and Manufacturing, June 2015, Volume 16, Issue 7, pp 1227 (SCI(E), IF 1.205, ISSN: 2234-7593).
[175]  Seungkyu Yang, Hyungsub Kim, Rajendra Charandeo Pawar, Ahn, S.H., Lee, C.S., 2015, "Dielectric characteristics of a barium titanate film deposited by Nano Particle Deposition System (NPDS)," International Journal of Precision Engineering and Manufacturing, May 2015, Volume 16, Issue 5, pp 1029-1034 (SCI(E), IF 1.205, ISSN: 2234-7593).
[174]  Sonkaria, S, Kim, H. T, Kim, S.Y., Kumari, N., Kim, Y. G, Khare, V., Ahn, S.H., 2015, "Ionic liquid-induced synthesis of a graphene intercalated ferrocene nanocatalyst and its environmental application," Applied Catalysis B: Enviromental, Volume 182, March 2016, Pages 326–335 (SCI, IF: 7.435, ISSN: 0926-3373) , IF 7.438 (top 7%).
[173]  Shim, J.E., Quan, Y.J., Wang, W., Rodrigue, H., Song, S.H. and Ahn, S.H. , 2015, "A Smart Soft Actuator using a Single Shape Memory Alloy for Twisting Actuation," Smart Materials and Structures, Vol. 24, No. 12, No. 125033 (SCI, IF 2.909, JCR Rank 8/56 in Instruments & Instrumentation, ISSN: 0964-1726).
[172]  Rajendra C. Pawar, Young Pyo, Ahn, S.H. and Lee, C.S., 2015, "Photoelectrochemical properties and photodegradation of organic pollutants using hematite hybrids modified by gold nanoparticles and graphitic carbon nitride," Applied Catalysis B: Environmental, Volumes 176–177, October 2015, Pages 654–666 (SCI, IF: 7.435, ISSN: 0926-3373).
[171]  Rodrigue, H., Wang, W., Bhandari, B. and Ahn, S.H., 2015, "Fabrication of Wrist-like SMA-based Actuator by Double Smart Soft Composite Casting," Smart Materials and Structures, Vol. 24, No. 12, No. 125003 (SCI, IF 2.909, JCR Rank 5/56 in Instruments & Instrumentation, ISSN: 0964-1726).
[170]  Yang, S.K., Kim, H.S., Ahn, S.H., Lee, C.S., 2015, "The effect of the agglomerated microstructure of dry-deposited TiO2 eletrodes on the performance of dye-sensitized solar cells," Electrochimica Acta, Vol 166, 1 June 2015, Pages 117-123 (SCI, IF 4.504, ISSN: 0013-4686).
[169]  Rajendra C. Pawar, Suhee Kang, Ahn, S.H. and Lee, C.S., 2015, "Gold nanoparticle modified graphitic carbon nitride/multi-walled carbon nanotube (g-C3N4/CNTs/Au) hybrid photocatalysts for effective water splitting and degradation," RSC Advances Issue 31, (SC(E), IF 3.708, ISSN: 2046-2069, DOI: 10.1039/C4RA15560B, Published online 27 Feb 2015).
[168]  Kim, Hyungsub, Yang, Seungkyu , Rajendra C. Pawar, Ahn, S.H., and Lee, C.S., 2015, "Role of TiO 2 nanoparticles in the dry deposition of NiO micro-sized particles at room temperature," Ceramics International, ELSEVIER (ENGLAND), Vol. 41, Issue 4, May 2015, pp. 5936-5944 (SCI, IF 2.086, ISSN: 0272-8842).
[167]  Lee, H.T., Kim, S. I., Park, J. M., Kim, H.J., Song, D.S., Kim, H.I., Wu, H. G., Ahn, S.H., 2015, "Shape Memory Alloy (SMA)-based Head and Neck immobilizer for Radiotherapy," Journal of computational design and engineering, Vol. 2, No. 3,pp. 176?82, July 2015, Elsevier (Netherlands), (ISSN: 2288-4300, DOI: 10.1016/j.jcde.2015.03.004), Google Scholar citation: 6.
[166]  Song,H.K., Sonkaria,S., Khare, V., Dong,K., Lee, H.T., Ahn, S.H., Kim,H.K., Kang,H.J., Lee,S.H., Jung,S.P. and Adams,J.M. , 2015, "Pond sediment magnetite grains show a distinctive microbial community," Microbial Ecology, Springer (USA), Vol.70, No.1,pp.168-174, July, (SCIE, IF 3.118, DOI:10.1007/s00248-014-0562-, ISSN:0095-3628).
[165]  Ahn, S.H., Yoon, H.S., Jang, K.H., Kim, E.S., Lee, H.T., Kim, C.S., Lee, G.Y., Cha, S.W., 2015, "Nanoscale 3D printing process using aerodynamically focused nanoparticle (AFN) printing, micro-machining, and focused ion beam (FIB)," CIRP Annals Manufacturing Technology, Elsevier Science BV, Vol. 64, Issue 1, pp. 523-526, April (SCI(E), IF 2.541, DOI: 10.1016/j.cirp.2015.03.007, ISSN: 0007-8506, Publication date (Web): April 30, JCR Impact Factor Rank: 4/44 (2015) in ENGINEERING, INDUSTRIAL), Top 10% in ENGINEERING, INDUSTRIAL.
[164]  Rodrigue, H., Wang, W., Bhandari, B., Han, M.W. and Ahn, S.H., 2015, "SMA-Based Smart Soft Composite Structure Capable of Multiple Modes of Actuation," Composites Part B: Engineering, Vol. 82, December 2015, pp. 152-158 (SCI, IF 4.727, JCR Rank 5/83 in Engineering, Multidisciplinary, ISSN 1359-8368, http://dx.doi.org/10.1016/j.compositesb.2015.08.020).
[163]  Wang, W., Rodrigue, H. and Ahn, S.H., 2015, "Smart Soft Composite Actuator with Shape Retention Capability using Embedded Fusible Alloy Structures," Composites Part B: Engineering, Vol. 78, 1 September 2015, Pages 507-514, Elsevier Science ltd (England) (SCI), IF 4.727, DOI:10.1016/j.compositesb.2015.04.007, ISSN 1359-8368, JCR Impact Factor Rank 4/85 in Engineering, Multidisciplinary).
[162]  Park, S.I., Kim, S., Choi, J.O., Song, J.H., Ahn, S.H. and Taya, M., 2015, "Low-cost fabrication of WO3 films using a room temperature and low-vacuum air-spray based deposition system for electrochromic device applications," Thin Solid Films, Elsevier (Netherland), Vol. 589, pp. 412-418, (SCI, IF 1.759, DOI:10.1016/j.tsf.2015.05.070, ISSN 0040-6090, JCR Impact Factor Rank: 6/18(2013) in Materials science, Coatings & Films), Google Scholar citation: 5.
[161]  Rodrigue, H., Bhandari, B., Wang, W. and Ahn, S.H., 2015, "3D Soft Lithography: A Fabrication Process for Thermocurable Polymers," Journal of Materials Processing Technology, Volume 217, March 2015, pp. 302-309, Elsevier Science ltd (England) (SCI(E), IF 3.147 JCR Rank 5/44 in Engineering, Industrial, ISSN 0924-0136, DOI 10.1016/j.jmatprotec.2014.11.005), Google Scholar citation: 5.
[160]  Lee, K.T., Kim, E.S., Chu, W.S. and Ahn, S.H., 2015, "Design and 3D printing of controllable-pitch Archimedean screw for pico-hydropower generation," Journal of Mechanical Science and Technology, Vol. 29, Issue 11, pp. 4851-4857, December (SCI(E), IF 0.838, JCR Impact Factor Ranking: 76/130 (2014) in ENGINEERING, Mechanical, DOI: 10.1007/s12206-015-1032-y, ISSN: 1976-3824).
[159]  Yoon, H.S., Kim, E.S., Kim, M.S., Lee, J.Y., Lee, G. B., and Ahn, S.H., 2015, "Towards Greener Machine Tools - A review on Energy Saving Strategies and Technologies," Renewable and Sustainable Energy Reviews, Pergamon-Elsevier Science ltd (United States), Vol. 48, pp. 870-891, August (SCI, IF 5.510, DOI: 10.1016/j.rser.2015.03.100, ISSN: 1364-0321, JCR Impact Factor Rank: 6/83 (2013) in ENERGY & FUELS), IF 5.510, Top 10% in ENERGY & FUELS.
[158]  Rodrigue, H., Bhandari, B., Han, M.W. and Ahn, S.H., 2015, "A Shape Memory Alloy-Based Soft Morphing Actuator Capable of Pure Twisting Motion," Journal of Intelligent Material Systems and Structures, Vol. 26, No. 9, pp. 1071-1078, SAGE publication ltd (England), (SCI(E), IF 2.172, ISSN 1530-8138, DOI 10.1177/1045389X14536008, JCR Ranking 68/251 in Materials Science, Multidisciplinary), Google Scholar Citation: 11.
[157]  Bhandari, B., Lee, K.T., Lee, G.Y., Cho, Y. M. and Ahn, S.H., 2015, "Optimization of Hybrid Renewable Energy Power Systems: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 2, Issue 1, pp. 99-112 (SCIE, IF 1.500, ISSN: 2234-7593, JCR Rank 13/39(33.3%, 2013) in Engineering, Manufacturing), Springer Award: Most Downloaded Article.
[156]  Davies, Philip; Papakonstantinou, Pagona; Martin, Nazario; Kratochvilova, Irena; Ewels, Chris; Shaffer, Milo; Heggie, Malcolm; Gspann, Thurid; Turak, Ayse; Barsan, Oana Andreea; Zitoun, David; Khare, V. ; Zoepfl, Alexander;, 2014, "Synthesis in in gas and liquid phase: general discussion," Faraday discussions, Vol. 173, pp. 115-135 (SCI, IF: 4.606, ISSN 1359-6640).
[155]  Davies, Philip; Kratochvilova, Irena; Ewels, Chris; Aqeel, Tariq; Martin, Nazario; Fal`ko, Vladimir; Enoki, Toshiaki; Rodriguez-Fortea, Antonio; Kaneko, Katsumi; Turak, Ayse; Buono, Carlo; Kovalenko, Valeri; Ajayan, Pulickel; Khare, V., 2014, "Doping and Theory: general discussion," Faraday discussions, Vol. 173, pp. 233-256 (SCI, IF: 4.606, ISSN 1359-6640).
[154]  Bikkarolla, Santosh Kumar; Baxendale, Mark; Ewels, Chris; Enoki, Toshiaki; Kaneko, Katsumi; Martin, Nazario; Santa-Cruz, Petrus; Edwards, Rebecca; Khanam, Zeba; Zitoun, David; Ajayan, Pulickel; Khare, V.; Zoepfl, Alexander; Gspann, Thurid; Ogihara, Hitoshi;, 2014, "Applications, composites, and devices: general discussion," Faraday discussions, Vol. 173, pp. 429-443 (SCI, IF: 4.606, ISSN 1359-6640).
[153]  Kim, C.S. and Ahn, S.H., 2014, "Mechanical Behavior of Microscale Carbon Pillar Fabricated by Focused Ion Beam Induced Deposition," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 15, No. 7,pp. 1485-1488, July 2014, (SCIE, IF 1.500, ISSN: 2234-7593).
[152]  Lee, G.Y., Park, J.I., Kim, C.S., Yoon, H.S., Jinkyu Yang, and Ahn, S.H., 2014, "Aerodynamically Focused Nanoparticle (AFN) Printing: Novel Direct Printing Technique of Solvent-free and Inorganic Nanoparticles," ACS Applied Materials and Interfaces, American Chemical Society (USA), Vol. 6, No. 19, pp. 16466-16471, September (SCI, IF 5.900, DOI: 10.1021/am504304g, ISSN: 1944-8244, Publication date (Web): September 11, 2014, JCR Impact Factor Rank: 26/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY), IF 5.900.
[151]  Choi, J.O., Kim, C.S., 2014, "Nanoscale Patterning and Welding by Solvent-free Dry Particle Spray and Focused Ion Beam," International Journal of Precision Engineering and Manufacturing-Green Technlogy, Springer, Vol.1, No.3, pp.257-260, July (SCIE, IF 1.585, DOI: 10.1007/s40684-014-0032-1).
[150]  Chu, W.S., Chun, D.M., and Ahn, S.H., 2014, "Research Advancement of Green Technologies," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol.15, No. 6, pp. 973-977, June (SCIE, IF 1.585, DOI: 10.1007/s12541-014-0424-8, ISSN: 2234-7593, JCR Impact Factor Rank: 33/128 in Mechanical (2013)).
[149]  Yan, J.,Kim, M.S.,Kang,K. M., Joo, K. H., Kang, Y. J.,and Ahn, S.H., 2014, "Evaluation of PP/ Clay Composites as Soundproofing Material," Journal of Polymers and Polymer Composites, Smithers Information Ltd. (England), Vol. 22, No. 1, pp. 65-72, (SCIE, IF 0.31, JCR Impact Factor Rank: 28/33 (2013) in MATERIALS SCIENCE, CHARACTERIZATION & TESTING).
[148]  Yoon, H.S., Lee, J.Y., Kim, H.S., Kim, M.S., Kim, E.S., Shin, Y.J., Chu, W.S., and Ahn, S.H., 2014, "A Comparison of Energy Consumption in Bulk Forming, Subtractive, and Additive Processes: Review and Case Study," International Journal of Precision Engineering and Manufacturing-Green Technology, IJPEM-GT, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 1, No. 3, pp. 261-279, July (SCI(E), IF: 2.545, DOI: 10.1007/s40684-014-0033-0, ISSN: 2288-6206, JCR Impact Factor Rank: 5/42 (2015) in ENGINEERING, MANUFACTURING), Springer Award: Most Cited Article.
[147]  Pandey, J.K. and Ahn, S.H., 2014, "A Special Issue on Bio-Based Technologies in Composites and Energy Applications," Journal of Biobased Materials and Bioenergy, Vol 8, No. 2 pp 115-279 (IF 0.83, ISSN 1556-6579).
[146]  Chun, D.M., Gaasuren Davaasuren, Chi-Vinh Ngo, Kim, C.S., Lee, G.Y., Ahn, S.H., 2014, "Fabrication of Transparent Superhydrophobic Surface on Thermoplastic Polymer using Laser Beam Machining and Compression Molding for Mass Production," CIRP Annals Manufacturing Technology, Technische Rundschau Edition Colibri Ltd. (Switzerland), Vol. 63, Issue 1, pp. 525-528 (SCIE).
[145]  Rodrigue, H., Wang, W., Bhandari, B., Han, M.W. and Ahn, S.H., 2014, "Cross-Shaped Twisting Structure using SMA-Based Smart Soft Composite," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 1, No. 2, pp. 153-156 (SCI(E), IF 3.494, JCR Rank 16/132 in Engineering, Mechanical, ISSN: 2288-6206, DOI 10.1007/s40684-014-0020-5), Google Scholar citation: 18.
[144]  Bhandari, B., Poudel, S.R., Lee, K.T. and Ahn, S.H., 2014, "Mathematical Modeling of Hybrid Renewable Energy System: A Review on Small HYdro-Solar-Wind Power Generation," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 1, No. 2, pp. 157-173 (SCIE, ISSN: 2234-7593)., Free Download.
[143]  Yoon, H.S., Kim, E.S., Kim, M.S., Lee, G. B., and Ahn, S.H., 2014, "Energy Consumption of the Brushing Process for PCB Manufacturing Based on a Friction Model," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 15, No. 11, pp. 2265-2272, November (SCI(E), IF 1.500, DOI: 10.1007/s12541-014-0590-8, ISSN: 2234-7593, JCR Impact Factor Rank: 33/128 (2013) in ENGINEERING, MECHANICAL).
[142]  Wang, W., Lee, J.Y., Rodrigue, H., Song, S.H., Chu, W.S. and Ahn, S.H., 2014, "Locomotion of Inchworm-inspired Robot made of Smart Soft Composite (SSC)," Bioinspiration & Biomimetics, IOP Publishing, Vol. 9, 046006 (SCIE, IF 2.939, DOI:10.1088/1748-3182/9/4/046006, ISSN 1748-3182, JCR Impact Factor Rank 2/25(2015) in Robotics), Covered by Phys.org and TechXplore, November 10, 2014.
[141]  Ahn, S.H., 2014, "An Evaluation of Green Manufacturing Technologies," International Journal of Precision Engineering and MAnufacturing-Green Technology, Vol. 1, No. 1, pp. 5-9, Jan 15, Free download until 2015.
[140]  Chu, W.S., Pandey, J.K., and Ahn, S.H., 2014, "Fabrication of Bio-composite Scaffold for Implantable Drug Delivery System (DDS)," Journal of Biobased Materials and Bioenergy - Special Issue, American Scientific Publishers, Vol. 8, No. 2, pp.230-239, April (SCIE, IF 0.826, jbmb.2014.1427, ISSN: 1556-6560, JCR Impact Factor Rank: 64/83 in Energy & Fuels (2013)), Cover Page.
[139]  Yoon, H.S., Lee, J.Y., Kim, M.S., and Ahn, S.H., 2014, "Empirical Power-consumption Model for Material Removal in Three-axis Milling," Journal of Cleaner Production, Elsevier Science ltd (England), Vol. 78, pp. 54-62, September (SCI(E), IF 3.590, DOI: 10.1016/j.jclepro.2014.03.061, ISSN: 0959-6526, JCR Impact Factor Rank: 29/216 (2013) in ENVIRONMENTAL SCIENCES), IF 3.590.
[138]  Chu, W.S., Kim, C.S., Lee, H.T., Choi, J.O., Park, J.I., Song, J.H., Jang, K.H., and Ahn, S.H., 2014, "Hybrid Manufacturing in Micro/Nano Scale: A Review," International Journal of Precision Engineering and Manufacturing-Green Technology, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 1, No. 1, pp. 75-92, January (SCIE, ISSN: 2234-7593), Springer Award: Most Cited Article.
[137]  Bhandari, B., Lee, K.T., Lee, C.S., Song, C.K., Maskey, R.K. and Ahn, S.H., 2014, "A Novel Off-grid Hybrid Power System Comprised of Solar Photovoltaic, Wind, and Hydro Energy Sources," Applied Energy, Elsevier, Vol. 133, No. 15, pp. 236-242, November 2014 (SCI, I.F. 5.261, ISSN: 0306-2619, DOI: 10.1016/j.apenergy.2014.07.033, JCR Rank 6/133(4.5%, 2013) in Engineering, Chemical), IF: 5.261.
[136]  Chun, D.M., Kim, C.S., Choi, J.O.,Lee, G.Y. and Ahn, S.H., 2014, "Multi-layer Deposition of Ceramic and Metal at Room Temperature using Nano-Particle Deposition System (NPDS) and Planarization Process," International Journal of Advanced Manufacturing Technology, Springer, Vol. 72, No. 1, PP. 41-46 (SCI, IF 1.1, ISSN: 0268-3768).
[135]  Pandey, J.K., Lee, H.T. ,Kim, C.S., Ahn, S.H., 2014, "Bio-inspired Deposition of Silver Nano-particles (AgNPs) on Silicon Substrate," Materials Letters, Elsevier (Netherlands), Vol. 116, No. 1, pp.175-177, February (SCI, IF 2.224, DOI: 10.1016/j.matlet.2013.11.006, ISSN: 0167-577X, JCR Impact Factor Rank: 61/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY), Google Scholar citation: 0.
[134]  Pham, M.Q., Yoon, H.S., Khare, V., and Ahn, S.H., 2014, "Evaluation of Ionic Liquids as Lubricants in Micro Milling - Process Capability and Sustainability," Journal of Cleaner Production, Elsevier Science ltd (England), Vol. 76, pp. 167-173, August (SCI(E), IF 3.590, DOI: 10.1016/j.jclepro.2014.04.055, ISSN: 0959-6526, JCR Impact Factor Rank: 29/216 (2013) in ENVIRONMENTAL SCIENCES), IF 3.590.
[133]  Bhandari, B., Hong, Y.S., Yoon, H.S., Moon, J.S., Pham, M.Q., Lee, G. B., Huang, Y. Linke, B. S., Dornfeld, D. A., Ahn, S.H., 2014, "Development of a Micro-Drilling Burr-Control Chart for PCB Drilling," Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, Elsevier Science Inc. (USA), Vol. 38, No. 1, pp. 221-229, January (SCI(E), IF 1.403, DOI: 10.1016/j.precisioneng.2013.07.010, ISSN: 0141-6359, JCR Impact Factor Rank: 23/87 (2013) in ENGINEERING, MULTIDISCIPLINARY).
[132]  Moon, J.S., Yoon, H.S., Lee, G. B., and Ahn, S.H., 2014, "Effect of Backstitch Tool Path on Micro-drilling for Printed Circuit Board," Precision Engineering - Journal of the International Societies for Precision Engineering and Nanotechnology, Elsevier Science Inc. (USA), Vol. 38, No. 3, pp. 691-696, July (SCI(E), IF 1.403, DOI: 10.1016/j.precisioneng.2014.03.002, ISSN: 0141-6359, JCR Impact Factor Rank: 23/87 (2013) in ENGINEERING, MULTIDISCIPLINARY).
[131]  Ahn, S.H. and Pandey, J.K., 2013, "Special Issue: Manufacturing and applications of bio-based composites," Journal of Biobased Materials and Bioenergy, Vol. 7, No. 1, pp. 1-174.
[130]  Kim, H.J., Song, S.H. and Ahn, S.H.*, 2013, "A Turtle-like Swimming Robot using a Smart Soft Composite (SSC) Structure," Smart Materials and Structures, IOP Publishing, Vol. 22, 014007, January (SCI, IF 2.089, DOI: 10.1088/0964-1726/22/1/014007, ISSN 1552-3098, JCR Impact Factor Rank: 7/57 (2013) in INSTRUMENTS & INSTRUMENTATION), Google Scholar citation: 47, Selected in IOP Highlight 2013 (http://cms.iopscience.iop.org/alfresco/d/d/workspace/SpacesStore/025882b8-23c2-11e4-907d-29411a5deefe/SMS_Highlights2013.pdf).
[129]  Pandey, J.K., Choi, J.O., Lee, H.T., Kim, C.S., Hyun-Joong Kim, Sera Jeon, Ahn, S.H., 2013, "Cellulose nanofiber assisted deposition of titanium dioxide on fluorine-doped tin oxide glass," RSC Advances, Royal Society of Chemistry (England). Vol.4 No.2, pp. 987-991. November (SCIE, IF 2.562 DOI: 10.1039/C3RA43818J, ISSN: 2046-2069).
[128]  Wu, R., Han, M.W., Lee, G.Y. and Ahn, S.H., 2013, "Woven Type Smart Soft Composite Beam with In-plane Shape Retention," Smart Materials and Structures, IOP Publishing (England), Vol. 22, No. 12, 125007 (SCI, IF 2.449, DOI: 10.1088/0964-1726/22/12/125007, ISSN:1361-665X, JCR Rank 7/57 in Instruments & Instrumentation).
[127]  Kim Y. H., Yang S. G., Lee J. W., Choi, J.O., Ahn, S.H., and Lee, C.S., 2013, "Photovoltaic Characteristics of a Dye-Sensitized Solar Cell (DSSC) Fabricated by a Nano-Particle Deposition System (NPDS)," Materials Transactions, The Japan Institute of Metals and Materials, Vol.54, No. 10, pp.2064-2068, September, 2013 (doi:10.2320/matertrans.M2013220, JCR Impact Factor Rank: 37/75 (2013) in METALLURGY & METALLURGICAL ENGINEERING).
[126]  Kim, M.S., Yan, J., Joo, K. H., Pandey, J.K., Kang, Y. J., and Ahn, S.H., 2013, "Synergistic Effects of Carbon Nanotubes and Exfoliated Graphite Nanoplatelets for Electromagnetic Interference Shielding and Soundproofing," Journal of Applied Polymer Science, Vol 130, No. 6 (SCI, IF 1.640.July 2013, DOI: 10.1002/APP.39605,JCR Impact Factor Rank: 38/82 (2013) in POLYMER SCIENCE).
[125]  Ahn, S.H., Chun, D.M., and Chu, W.S., 2013, "Perspective to Green Manufacturing and Applications," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol.14, No. 6, pp. 873-874, June (SCIE, IF 1.585, DOI: 10.1007/s12541-013-0114-y, ISSN: 2234-7593, JCR Impact Factor Rank: 33/128 in Mechanical (2013)), IJPEM Most Cited Article Award, 2013 to 2014 (Nov. 20, 2015).
[124]  Kim, M.S., Yan, J., Kang, K. M., Joo, K. H., Kang, Y. J. and Ahn, S.H., 2013, "Soundproofing Ability and Mechanical Properties of Polypropylene/Exfoliated Graphite Nanoplatelet/Carbon Nanotube (PP/xGnP/CNT) Composite," INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING Vol. 14, No. 6, pp. 1087-1092JCR,Impact Factor Rank: 33/128 (2013) in ENGINEERING, MECHANICAL.
[123]  Lee, J.W., Choi, J.O., Jeong, J.E., Yang, S.G., Ahn, S.H., Kwon, K.W., Lee, C.S., 2013, "Energy Harvesting of Flexible and Translucent Dye-sensitized Solar Cellfabricated by Laser Assisted Nano Particle Deposition System," Electrochimica Acta, Elsevier, Vol. 103, pp. 252-258, July. (SCI, IF 4.039, http://dx.doi.org/10.1016/j.electacta.2013.04.050, JCR Impact Factor Rank: 4/27 (2013) in ELECTROCHEMISTRY), IF 4.039.
[122]  Khare, V., Pham, M.Q., Kumari, N., Yoon, H.S. , Kim, C.S., Park, J.I., and Ahn, S.H., 2013, "Graphene-Ionic Liquid based Hybrid Nanomaterials as Novel Lubricant for low Friction and Wear," ACS Applied Materials and Interfaces, American Chemical Society (USA), Vol. 5, No. 10, pp. 4063-4075, April (SCI, IF 5.008, DOI: 10.1021/am302761c, ISSN: 1944-8244, JCR Impact Factor Rank: 26/241 (2012) 26/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY), IF 5.008.
[121]  Kim, J.W., Yoon, H.S., and Ahn, S.H., 2013, "Effect of Repeated Insertions into a Mesoscale Pinhole Assembly: Case of Interference Fit," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 14, No. 9, pp. 1651-1654, September (SCI(E), IF 1.585, DOI: 10.1007/s12541-013-0223-7, ISSN: 2234-7593, JCR Impact Factor Rank: 25/125 (2012) 33/128 (2013) in ENGINEERING, MECHANICAL).
[120]  Kim, M.S., Yan, J., Kang, K.M., Joo, K.H., Pandey, J.K., Kang, Y.J. and Ahn, S.H., 2013, "Soundproofing Properties of Polypropylene/Clay/Carbon Nanotube Nanocomposites ," Journal of Applied Polymer Science,SCI(E), IF 1.640,DOI: 10.1002/APP.39194,JCR Impact Factor Rank: 38/82 (2013) in POLYMER SCIENCE.
[119]  Yoon, H.S., Moon, J.S., Pham, M.Q., Lee, G. B., and Ahn, S.H., 2013, "Control of Machining Parameters for Energy and Cost Savings in Micro-scale Drilling of PCBs," Journal of Cleaner Production, Elsevier Science ltd (England), Vol. 54, pp. 41-48, September (SCI(E), IF 3.398, DOI:10.1016/j.jclepro.2013.04.028, ISSN: 0959-6526, JCR Impact Factor Rank: 29/210 (2012) 29/216 (2013) in ENVIRONMENTAL SCIENCES), IF 3.398.
[118]  Kim, J.W., Yoon, H.S., Lee, H.S., Lee, K.E., and Ahn, S.H., 2013, "Defects of Wave Patterns from Tungsten Carbide/Stainless Steel Brazed Micro-end-milling for Printed Circuit Board Machining," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, SAGE publication ltd (England), Vol. 227, No. 11, pp. 1743-1747, November (SCI, IF 0.770, DOI: 10.1177/0954405413491242, ISSN: 0954-4054, JCR Impact Rank: 63/125 (2012) 81/128 (2013) in ENGINEERING, MECHANICAL).
[117]  Yoon, H.S., Lee, K.T., and Ahn, S.H., 2013, "Measurement of Roof Deformation Caused by Vehicle Rollover," International Journal of Automotive Technology, The Korean Society of Automotive Engineers (Korea), Vol. 14, No. 4, pp. 667-674, August (SCI(E), IF 0.690, DOI: 10.1007/s12239-013-0072-5, ISSN: 1229-9138, JCR Impact Factor Rank: 70/125 (2012) 70/128 (2013) in ENGINEERING, MECHANICAL).
[116]  Jung, B.S., Jung-Pyo Kong, NingXue Li, Kim, Y.M., Kim, M.S., Ahn, S.H. and Maenghyo Cho, 2013, "Numerical Simulation and Verification of a Curved Morphing Composite Structure with Embedded Shape Memory Alloy Wire Actuators," Journal of intelligent material systems and structures, SAGE Publications Ltd. (England), Vol. 24, No. 1 pp. 89-98, January (SCIE, IF 1.953, DOI: 10.1177/1045389X12459588, ISSN: 1530-8138).
[115]  Kim, J.S., Lee, J.Y., Lee, K.T., Kim, H.S., Ahn, S.H., 2013, "Fabrication of 3D Soft Morphing Structure using Shape Memory Alloy (SMA) Wire/Polymer Skeleton Composite," Journal of Mechanical Science and Technology (Korea), Springer, Vol 27, No. 10, pp. 3123-3129, October (SCI, IF 0.616, DOI 10.1007/s12206-013-0832-1, ISSN : 1976-3824, JCR Rank 79/128(61.7%, 2013) in Engineering, Mechanical).
[114]  Park, Shinyoung, Kim, Kwang-Su, Roh, Ji Young, Jang, Gyu-Beom, Ahn, S.H. and Lee, C.S., 2012, "Improvement of the Tool Life of a Micro-End Mill Using Nano-Sized SiC/Ni Electroplating Method," Journal of Nanoscience and Nanotechnology, Volume 12, Number 4, April 2012, pp. 3376-3379.
[113]  Ahn, S.H., 2012, "Preface for a special issue on green manufacturing and applications," International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 7, pp. 1027 (SCI(e), IF 1.205).
[112]  Pandey, J.K., H. Takagi, D. R.Saini, A. N. Nakagaito,Ahn, S.H., 2012, "An Overview on the Cellulose based Conducting Composites," Composites Part B: Engineering, ELSEVIER SCI LTD. (England), Vol. 43, No. 7, pp. 2822-2826, October (SCI, IF 2.143, DOI: 10.1016/j.compositesb.2012.04.045, ISSN: 1359-8368).
[111]  Pandey, J.K., Sena Lee, Hyun-Joong Kim, Hitoshi Takagi, Kim, C.S., Ahn, S.H., 2012, "Preparation and Properties of Crystalline Cellulose-modified Layered Silicate and Compatibilzed Polypropylene Composites ," Journal of Applied Polymer Science WILEY-BLACKWELL (US) Vol. 125, No. S1, pages E651–E660, July (SCI, IF 1.395, DOI: 10.1002/app.34546, ISSN: 0021-8995)..
[110]  Pandey, J.K., Kim, C.S., Chu, W.S., Choi, W.Y., Ahn, S.H., 2012, "Preparation and Structural Evaluation of Nano Reinforced Composites from Cellulose Whiskers of Grass and Biodegradable Polymer Matrix," Journal of Composite Material, SAGE Publication Ltd. (England) Vol. 46, No. 6, pp.653~663, March (SCI, IF 0.936, DOI: 10.1177/0021998312438174, ISSN: 0021-9983, JCR Impact Factor Rank: 9/24 in Composites (2013)).
[109]  Sonkaria S, Ahn, S.H., Khare, V., 2012, "Nanotechnology and Its Impact on Food and Nutrition: A review," Recent Patents on Food, Nutrition & Agriculture, Bentham Science Publishers (UAE), Vol. 4, pp. 8-18, April (DOI: 10.2174/2212798411204010008, ISSN 2212-7984).
[108]  Kim, Kwang-Su, Park, Shinyoung, Cho, Danee, Jang, Gyu-Beom, Ahn, S.H., Lee, C.S., 2012, "Improved Micro Drill Bit Tool Life using Nano-scale SiC/Ni Electroplating," Journal of Ceramic Processing Research, Korean Assoc Crystal Growth, Inc (South Korea), Vol. 13, No. 6, pp. 730-734 (SCI, IF.0.386, ISSN: 1229-9162).
[107]  Changhyun Pang, Lee, G.Y., Tae-il Kim, Sang Moon Kim, Hong Nam Kim, Ahn, S.H. and Kahp-Yang Suh, 2012, "A Flexible and Highly Sensitive Strain-gauge Sensor using Reversible Interlocking of Nanofibres," NATURE MATERIALS, Nature Publishing Group, advance online publication, July (SCI, I.F. 32.841, DOI:10.1038/nmat3380, ISSN : 1476-4660), I.F. 32.841, Citation by Google Scholar 74.
[106]  Kim, Y.H., Kim, K.S., Lee, J.W., Kim, M.S., Choi, J.O., Ahn, S.H. and Lee, C.S., 2012, "Fabrication of Dye-Sensitized Solar Cell (DSSC) Using Different Particle Sizes of TiO2 Deposited via Nano-Particle Deposition System (NPDS)," Journal of Nanoscience and Nanotechnology, American Scientific Publishers (USA), Vol. 12, No. 4, pp. 3478-3482, (SCI, IF 1.435, ISSN: 1533-4880, JCR Impact Factor Rank: 130/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY).
[105]  Chun, D.M., Choi, J.O., Lee, C.S., Kanno, I., Kotera, H. and Ahn, S.H., 2012, "Nano-particle deposition system (NPDS): Low energy solvent-free dry spray process for direct patterning of metals and ceramics at room temperature," International Journal of Precision Engineering and Manufacturing, KSPE (Korea) Vol. 13, No. 7, pp. 1107-1112, (SCI, IF 1.060, ISSN 2234-7593, JCR Impact Factor Rank: 33/128 (2013) in ENGINEERING, MECHANICAL).
[104]  Ahn, S.H., Choi, J.O., Kim, C.S., Lee, G.Y., Lee, H.T., Kyujin Cho, Chun, D.M., C. S. Lee, 2012, "Laser-Assisted Nano Particle Deposition System and Its Application for Dye Sensitized Solar Cell Fabrication," CIRP Annals - Manufacturing Technology, Elsevier (Netherland), Vol. 61, No. 1, pp. 575-578 (SCIE, IF 1.708), JCR Impact Factor Rank: 3/43 (2013) in ENGINEERING, INDUSTRIAL, Top 10% in ENGINEERING, INDUSTRIAL.
[103]  Chu, W.S., Lee, K.T., Song, S.H., Han, M.W., Lee, J.Y., Kim, H.S., Kim, M.S., Park, Y. J., Cho, K. J. and Ahn, S.H., 2012, "Review of Biomimetic Underwater Robots Using Smart Actuators," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 13, No. 7, pp. 1281-1292, July (SCI(E), IF 1.141, DOI: 10.1007/s12541-012-0171-7, ISSN: 2234-7593, JCR Impact Factor Rank: 33/128 in Mechanical (2013)), Citation by Google Scholar 82(Sep., 2015), IJPEM Most Cited Articles Award, 2012 to 2013, Google Scholar Citation: 115.
[102]  Ahn, S.H., Lee, K.T., Kim, H.J., Wu, R., Kim, J.S., Song, S.H., 2012, "Smart Soft Composite: An Integrated 3D Soft Morphing Structure Using Bend-Twist Coupling of Anisotropic Materials," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol.13, No. 4, pp. 631-634, April (SCIE, IF 1.141, DOI: 10.1007/s12541-012-0081-8, ISSN: 2234-7593, JCR Rank 13/39(33.3%, 2013) in Engineering, Manufacturing).
[101]  Bhandari, B., Lee, G.Y., and Ahn, S.H., 2012, "A Review on IPMC Material as Actuators and Sensors: Fabrication, Characterization and Applications," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 13, No. 1, pp. 141-163, Jan. (SCIE, IF 1.141, DOI: 10.1007/s12541-011-0116-6, ISSN: 1229-8557, IJPEM Most Downloaded Article Award 2012.
[100]  Kim, C.S., Ahn, S.H., Jang, D. Y., 2012, "Review: Developments in Micro/Nanoscale Fabrication by Focused ion beams ," Vacuum, Elsevier (Netherlands), Volume. 86, No. 8, pp. 1014-1035, 29 February (SCI, I.F. 1.048, DOI: http://dx.doi.org/10.1016/j.vacuum.2011.11.004, ISSN: 0042-207X).
[99]  Chun, D.M., Choi, J.O.,Caroline S. Lee, Ahn, S.H.*, 2012, "Effect of Stand-off Distance for Cold Gas Spraying of Fine Ceramic Particles (< 5 μm) under Low Vacuum and Room Temperature using Nano-Particle Deposition System (NPDS)," Surface and Coatings Technology, Vol. 206, No. 8-9, 15, pp. 2125-2132, January (SCI, IF 1.998, DOI: 10.1016/j.surfcoat.2011.09.043, ISSN: 0257-8972).
[98]  Kim, M.S., Chun, D.M., Choi, J.O., Lee, J.C., Kim, Yang Hee, Kim, Kwang-Su, Caroline Sunyong Lee, Ahn, S.H.*, 2012, "Dry-spray Deposition of TiO2 for Flexible Dye-Sensitized Solar Cell (DSSC) using Nano Particle Deposition System (NPDS)," Journal of Nanoscience and Nanotechnology, Vol. 12, pp. 3384-3388 (doi:10.1166/jnn.2012.5548, JCR Impact Factor Rank: 130/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY).
[97]  Kim, B., Kim, Y.-M., Lee, H.S.,Yang, S.-M., Kim, Y.M. and Ahn, S.H., 2011, "Effect of Moisture and Temperature on Mechanical Properties of Graphite Composite Bipolar Plate for Proton Exchange Membrane Fuel Cell (PEMFC)," Advanced Composite Materials, Vol. 20, No. 1, pp. 53-64.
[96]  Kim, M.S., Chu, W.S., Lee, J.H., Kim, Y.M. and Ahn, S.H., 2011, "Manufacturing of Inchworm Robot Using Shape Memory Alloy (SMA) Embedded Composite Structure," International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 3, pp. 565-568.
[95]  Kim, Y. H., Kim, M.S., Kim, K. S., Ahn, S.H., Lee, C.S., 2011, "Deposition of TiO2 layers for dye-sensitized solar cells using nano-particle deposition system," Current Applied Physics, Volume 11, Issue 1, Supplement, January 2011, Pages S122–S126 (SCI, IF 2.212, ISSN: 1567-1739)).
[94]  Ryu, Junghyun, Jung, B.S., Kim, M.S., Gong, Jungpyo, Cho, Maenghyo, and Ahn, S.H., 2011, "Numerical Simulation of Hybrid Composite Shape-Memory Alloy Wire-embedded Structures," Journal of Intelligent Material Systems and Structures, SAGE Publications Ltd. (England), (SCIE, IF 1.604, ISSN: 1530-8138), vol. 22 no.17 pp. 1941-1948, Sep. 15.
[93]  Ahn, S.H., Chun, D.M., Kim, C.S., 2011, "Nanoscale Hybrid Manufacturing Process by Nano Particle Deposition System (NPDS) and Focused Ion Beam (FIB)," CIRP Annals - Manufacturing Technology, Elsevier (Netherland), Vol. 60, No. 1, pp. 583-586, (SCIE, I.F. 1.684, doi:10.1016/j.cirp.2011.03.071, ISSN: 0007-8506) .
[92]  Kim, M.S., Chun, D.M., Choi, J.O., Lee, J.C., Kwang-Su Kim, Yang Hee Kim, Caroline Sunyong Lee and Ahn, S.H., 2011, "Room Temperature Deposition of TiO2 using Nano Particle Deposition System (NPDS): Application to Dye-Sensitized Solar Cell (DSSC)," International Journal of Precision Engineering and Manufacturing, The Korean Society for Precision Engineering (Korea), Vol. 12, No. 4, pp. 749-752, August, (SCI(E), IF 1.141, DOI: 10.1007/s12541-011-0099-3 ,ISSN : 2234-7593, JCR Impact Factor Rank: 33/128 (2013) in ENGINEERING, MECHANICAL).
[91]  Yoon, H.S., Wu, R., Lee, T. M., and Ahn, S.H.*, 2011, "Geometric Optimization of Micro Drills using Taguchi Methods and Response Surface Methodology," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering (Korea), in co-publication with Springer Verlag GmbH, Vol. 12, No. 5, pp. 871-875, October (SCI(E), IF 1.141, DOI: 10.1007/s12541-011-0116-6, ISSN: 2234-7593, JCR Impact Factor Rank: 34/122 (2010) 33/128 (2013) in ENGINEERING, MECHANICAL).
[90]  Lee, G.Y., Choi, J.O., Kim, Myeungseon and Ahn, S.H.*, 2011, "Fabrication and Reliable Implementation of an Ionic Polymer–Metal Composite (IPMC) Biaxial Bending Actuator," Smart Materials and Structures, Institute of Physics (IOP) Vol. 20, No. 10, 105026, October (SCI, IF 2.094, DOI: 10.1088/0964-1726/20/10/105026, ISSN 0964-1726, JCR Impact Factor Rank: 54/251 (2013) in MATERIALS SCIENCE, MULTIDISCIPLINARY).
[89]  Chun, D.M., and Ahn, S.H.*, 2011, "Deposition Mechanism of Dry Sprayed Ceramic Particles at Room Temperature using a Nano-Particle Deposition System (NPDS)," Acta Materialia, Elsevier, Vol. 59, No.7, pp. 2693-2703, April (SCI, DOI: 10.1016/j.actamat.2011.01.007, ISSN: 1359-6454), IF 3.76.
[88]  Kim, M.H., Kim, H.J., Kim, N.N., Yoon, H.S. and Ahn, S.H.*, 2011, "A Rotational Ablation Tool for Calcified Atherosclerotic Plaque Removal," Biomedical Microdevice, Springer (Netherlands), Volume 13, No. 6, pp. 963-971, July (SCI(E), IF 3.386, DOI: 10.1007/s10544-011-9566-y, ISSN 1387-2176, JCR Impact Factor Rank: 7/70 (2010) 20/76 (2013) in ENGINEERING, BIOMEDICAL), IF 3.386.
[87]  Hong, Y.S., Ahn, S.H., Song, Chulki and Cho, Youngman*, 2011, "Component-level Fault Diagnostics of a Bevel Gear using a Wavelet Packet Transform," Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Volume 225, Number 1, February / 2011 (SCI, IF 0.432, DOI: 10.1177/2041300910393428, ISSN: 0954-4089 (Print) 2041-3009 (Online)), One of the top downloaded articles in 2011 in this journal.
[86]  Chun, D.M., Lee, J.C., Yeo, J.C., Ahn, S.H.*, S. S. Hong, and J. D. Jang, 2011, "Capacity Estimation of Torque Converters with Piston Holes using Response Surface Method and Artificial Neural Net," International Journal of Automotive Technology, Korean Soc. Automotive Engineers, Vol. 12, No. 2, pp. 273-280, April (SCIE, IF 0.51, DOI:10.1007/s12239−011−0032−x, ISSN: 1229-9138).
[85]  Song, W. J., Kim, Y.H., Kim, M.S., Ahn, S.H., and Lee, C. S., 2010, "Fine-Sized Etching of Flexible Substrates Using Nano Particle Deposition System," Materials Transactions, The Japan Instiute of Metals (Japan), Vol. 51, No. 11, pp. 2099-2103, October (SCI, IF 0.795 DOI:10.2320/matertrans.M2010221, ISSN: 1345-9678) .
[84]  KyuBong Jung, WooJin Song, Chun, D.M., Yeo, J.C., Kim, M.S., Ahn, S.H. and Caroline Sunyong Lee*, 2010, "Coating of Ni Powders through Micronozzle in a Nano Particle Deposition System," Metals and Materials International, Vol. 16, No. 3, pp. 465-467, Jun. (SCIE, IF 1.09, ISSN: 1598-9623), Best Paper Award.
[83]  Chun-Woong Park, Yun-Seok Rhee, Sung-Hoon Park, Son Dao Danh, Ahn, S.H., Sang-Cheol Chi and Eun-Seok Park*, 2010, "In Vitro/in Vivo Evaluation of NCDS-Micro-Fabricated Bioegradable Implant," Archives of Pharmacal Research, The Pharmaceutical Society of Korea, Vol. 33, No. 3, pp.427-432, March (SCIE, IF 1.085, DOI: 10.1007/s12272-010-0312-4 ISSN: 0253-6269).
[82]  Kyubong Jung, Woojin Song, Chun, D.M., Yang-Hee Kim, Yeo, J.C., Kim, M.S., Ahn, S.H., and Caroline Sunyong Lee*, 2010, "Nickel Line Patterning using Silicon Supersonic Micronozzle Integrated with a Nano Particle Deposition System," Japanese Journal of Applied Physics, Institute of Pure and Applied Physics (IPAP) (Japan), Vol. 49, No. 5, 05EC09 (SCIE, IF 1.309) .
[81]  Kim, C.S., Kim, Kim, Dong Hwan, Kim, Il-Hae, Jang, Dong-Young, Yim, Chung-Hyuk, Ahn, S.H., and Han Dong-Chul, 2010, "Investigation of Field-emitted Electron Beam Behaviors using a Line Collector in a Triode Electron Gun System," Microelectronic Engineering, Elsevier (Netherland), Vol. 87, No. 11, pp.2190-2195, November (SCI, I.F. 1.503, doi:10.1016/j.mee.2010.02.001, ISSN:01679317).
[80]  WooJin Song, KyuBong Jung, Chun, D.M., Ahn, S.H., and Caroline Sunyong Lee*, 2010, "Deposition of Al2O3 Powder using Nano-Particle Deposition System," Surface review and letters, Vol. 17, No. 2, pp. 189-193, Apr. (SCI, IF 0.391).
[79]  KyuBong Jung, WooJin Song, Chun, D.M., Yeo, J.C., Kim, M.S., Ahn, S.H., and Caroline Sunyong Lee*, 2010, "Computational Fluid Dynamics Analysis of Fabricated Micronozzle for Supersonic Particle Deposition," Surface review and letters, Vol. 17, No. 1, pp. 45-49, Feb. (SCI, IF 0.391).
[78]  Jung, B.S., Kim, M.S., Kim, J.S., Kim, Y.M., Lee, W. Y. and Ahn, S.H.*, 2010, "Fabrication of a Smart Air Intake Structure using Shape Memory Alloy Wire Embedded Composite," Physica Scripta, IOP Publishing Ltd. (Sweden), Volume 2010, T139, 014042 (SCI, IF 0.970, ISSN 0031-8949).
[77]  Chun, D.M., Kim, M.S., Yeo, J.C., Kim, M.H., Ahn, S.H.*, Caroline Sunyong Lee, 2010, "Nano/Micro Particle Beam for Ceramic Deposition and Mechanical Etching," Physica Scripta, IOP Publishing Ltd. (Sweden), Volume 2010, T139, 014047 (SCI, IF 0.970, ISSN 0031-8949).
[76]  Jung, B.S., Kim, M.S., Kim, Y.M., and Ahn, S.H.*, 2010, "Fabrication of Smart Structure using Shape Memory Alloy Wire Embedded Composite," Materialwissenschaft und Werkstofftechnik (Materials Science and Engineering Technology) (Germany), Vol. 41, No. 5, pp.320-324,(SCIE, IF 0.356, DOI 10.1002/mawe.201000604, ISSN: 1521-4052).
[75]  Kim, C.S., Kim, H.J., Jang, Dong-Young, and Ahn, S.H.*, 2010, "Morphological Influence of the Beam Overlap in Focused Ion Beam Induced Deposition using Raster Scan," Microelectronic Engineering, Elsevier (Netherlands), Vol. 87, No. 5-8 (May-August 2010), pp.972-976, (SCI, I.F. 1.503, doi:10.1016/j.mee.2009.11.131, ISSN:0167-9317).
[74]  Kim, H.J., Wie, K.H., Ahn, S.H., Choo, Hun-Sung, and Jun, Cha-Soo*, 2010, "Slicing Algorithm for Polyhedral Models based on Vertex Shifting," International Journal of Precision Engineering and Manufacturing, in co-publication with Springer Verlag GmbH, Vol. 11, No. 5, pp. 803-807, October (SCIE, IF 1.207, DOI: 10.1007/s12541-010-0096-y, ISSN: 1229-8557).
[73]  Pandey, J.K., Ahn, S.H., Lee, Caroline Sunyong, Mohanty, Amar Kumar, and Misra Manuju, 2010, "Recent Advances in the Application of Natural Fiber based Composites," Composites Part A-Applied Science and Manufacturing, Elsevier SCI Ltd. (England) Vol 295, No. 11, pp. 975-989, (SCI, IF: 1.951, ISSN: 1359-835X), Citation by Google Scholar 55.
[72]  Pandey, J.K., Lee, Caroline Sunyong, and Ahn, S.H.*, 2010, "Preparation and Properties of Bio-nano Reinforced Composites from Biodegradable Polymer Matrix and Cellulose Whiskers ," Journal of Applied Polymer Science, Elsevier Ltd. (England), Vol. 115, No. 4, pp. 2493-2501, Feb. (SCI, IF: 1.481, DOI: 10.1002/app.31205(1010) ISSN 1359-8368).
[71]  Kang, Y.C., Chun, D.M., Yan, J., and Ahn, S.H.*, 2010, "Computer-aided Environmental Design System for EuP Directive," International Journal of Precision Engineering and Manufacturing, IJPEM, The Korean Society for Precision Engineering, (Korea), Vol. 11, No. 3, pp. 397-406, Jun. (SCIE, IF 1.207, DOI: 10.1007/s12541-010-0046-8, ISSN: 1229-8557,JCR Impact Factor Rank: 33/128 (2013) in ENGINEERING, MECHANICAL), IJPEM Highly Commended Paper Award.
[70]  Lee, J.W., Lee, J.C., Pandey, J.K., Ahn, S.H.*, and Kang, Yeon-Jun, 2010, "Mechanical Properties and Sound Insulation Effect of ABS/Carbon-black Composites," Journal of composite materials, SAGE, Vol. 44, No. 14, pp. 1701-1716, January, (SCI, IF 1.034, DOI: 10.1177/0021998306067064, ISSN: 0021-9983).
[69]  Lee, J.W., Lee, J.C., Choi, W.Y., Chun, D.M., and Ahn, S.H.*, 2010, "Design of Repeat-antenna Package for Mobile Communication Made of Ferrite-loaded Glass-fabric/Epoxy Composites," Advanced composite materials, BRILL, Vol. 19, pp. 215-228, June, (SCIE, IF 0.404, DOI:10.1163/092430410X490464, ISSN: 0924-3046).
[68]  Hameed, Z., Ahn, S.H., Cho,Youngman*, 2010, "Practical Aspects of a Condition Monitoring System for a Wind Turbine with Emphasis on its Design, System Architecture, Testing and Installation," Renewable Energy, Vol.35(5), pp. 879-894 (SCI, IF 1.66), May, Citation by Google Scholar 49.
[67]  Kim, C.S., Ahn, S.H.*, Jang, Dong-Young*, 2010, "Nanoscale Effects in Carbon Structures Fabricated using Focused Ion Beam - Chemical Vapor Deposition," Thin Solid Films, Elsevier (Netherland), Vol. 518, No. 18, pp. 5177-5182, 1 July (SCI, I.F. 1.884, DOI: 10.1016/j.tsf.2010.03.160, ISSN: 0040-6090).
[66]  Kang, H.J., Kim, H.J., Kim, J.S., Choi, W.Y., Chu, W.S., and Ahn, S.H.*, 2010, "Laser Marking System for Light Guide Panel using Design of Experiment and Web-based Prototyping," Robotics and Computer-Integrated Manufacturing, Pergamon-Elsevier Science Ltd. (England), Vol. 26, No. 5, pp. 535-540, October (SCI, IF 1.371, DOI: 10.1016/j.rcim.2010.04.003, ISSN:0736-5845, JCR Impact Factor Rank: 29/102 in Interdisciplinary Applcations (2013)).
[65]  Woojin Song, Kyubong Jung, Chun, D.M., Ahn, S.H., and Caroline Sunyong Lee*, 2009, "Nanoparticle Deposition of Al2O3 Powder on Various Substrates," Materials Transactions, Japan Inst Metals, Vol. 50, No. 11, pp. 2680-2684, Oct (SCI IF 0.753, ISSN: 1345-9678).
[64]  Pikhitsa, Peter V.*, Choi, Mansoo, Kim, H.J., and Ahn, S.H., 2009, "Auxetic Lattice of Multipods," Physica Status Solidi (b) Basic Solid State Physics, Wiley-vch (Germany), Vol. 246, No. 9, pp. 2098-2101, August (SCI, IF 1.166, DOI: 10.1002/pssb.200982041, ISSN: 0370-1972).
[63]  Cho, Kyu-Jin, Koh, Je-Sung, Kim, Sangwoo, Chu, W.S., Hong, Yongtaek, and Ahn, S.H.*, 2009, "Review of Manufacturing Processes for Soft Biomimetic Robots," International Journal of Precision Engineering and Manufacturing, Korean Society for Precision Engineering, in co-publication with Springer Verlag GmbH, Vol. 10, No. 3, pp. 171-181, July (SCIE, ISSN: 1229-8557, JCR Impact Factor Rank: 33/128 in Mechanical (2013)), IJPEM Most Cited Articles Award, 2009 to 2010, Citation by Google Scholar 46.
[62]  Kim B.K.*, Kim, H. C., Hong, J.P., and Ahn, S.H., 2009, "Factors Affecting the Accuracy of Curability Estimates in the Design of Automotive V-belt Pulleys using Finite Element Analysis," Proceedings of the Institution of Mechanical Engineers, Part D : Journal of Automobile Engineering, Professional Engineering Publishing (England), Vol.223, No.10, pp.1301-1309, October (SCIE, IF 0.342, DOI: 10.1243/09544070JAUTO1167, ISSN: 0954-4070).
[61]  Park, Jong-Ha, Lee, J.C., Ryu, Sae-Hee, Jung, Kyu Bong, Song, Han-Bok , Yun, Joon-Chul, Choa, Yong-Ho, Ahn, S.H.*, and Lee, Caroline Sunyong*, 2009, "Crack-free Joint in a Ni-Al2O3 FGM System using Three-dimensional Modeling," Materials Transactions, The Japan Institute of Metals, Vol. 50, No. 7, pp. 1875-1880, June (SCI, IF 0.753, DOI:10.2320/matertrans.M2009041, ISSN:1345-9678).
[60]  Ryu, Sae-hee, Park, Jong-ha, Lee, Caroline Sunyong*, Lee, J.C., Ahn, S.H., and Oh, Sung-tag, 2009, "Experimental Measurement of Coefficient of Thermal Expansion for graded Layers in Ni-Al2O3 FGM Joints for Accurate Residual Stress Analysis," Materials Transactions, The Japan Institute of Metals, Vol. 50, No. 6, pp. 1553-1557, May (SCI, IF 0.753, DOI:10.2320/matertrans.M2009028, ISSN: 1345-9678).
[59]  Park, J.B., Wie, K.H., Park, Jae-Seuk, and Ahn, S.H.*, 2009, "Evaluation of Machinability in the Micro end milling Printed Circuit Boards," Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture (England), Vol. 223, No. 11, pp. 1465-1474, October (SCI, IF 0.281, DOI: 10.1243/09544054JEM1427, ISSN: 0954-4054).
[58]  Pandey, J.K., Chu, W.S., Kim, C.S., Lee, Caroline Sunyong, and Ahn, S.H.*, 2009, "Bio-nano Reinforcement of Environmentally Degradable Polymer Matrix by Cellulose Whiskers from Grass," Composite Part B:Engineering, Elsevier SCI Ltd. (England), Vol. 40, No. 7, pp. 676-680, October (SCI, IF 1.481, DOI: 10.1016/j.compositesb.2009.04.013, ISSN: 1359-8368, JCR Impact Factor Rank: 7/87 in Multidisciplinary (2013)) , Citation by Google Scholar 33.
[57]  Kim, C.S., Park, Jinjoo, Chu, W.S., Ahn, S.H., Jang, Dong-Young., and Kim, Sung-Dong, 2009, "Fabrication of Silicon Micro-Mold for Polymer Replication using Focused Ion Beam," Microelectronic Engineering, Elsevier (Netherlands), Vol. 86, No. 4-6, pp. 556-560, June (SCI, I.F. 1.503, DOI:10.1016/j.mee.2008.12.081, ISSN:0167-9317, JCR Impact Factor Rank: 110/248 in Electrical & Electronic (2013)).
[56]  Kim, M.S., Chu, W.S., Kim, Y.M., and Ahn, S.H.*, 2009, "Direct Metal Printing of 3D Electrical Circuit using Rapid Prototyping," International Journal of Precision Engineering and Manufacturing, Korean Society for Precision Engineering, in co-publication with Springer Verlag GmbH, Vol.10 No.5, pp.147-150, (SCIE, IF 1.207, DOI: 10.1007/s12541-009-0106-0, ISSN: 1229-8557, JCR Impact Factor Rank: 33/128 in Mechanical (2013)).
[55]  Pandey, J.K., Kim, M.H., Chun, D.M., Lee, C. S. and Ahn, S.H.*, 2009, "Surface Modification of Polyethylene (PE) by the Deposition of Titanium Dioxide (TiO2) Nano-particles to Enhance the Photocatalytic Activities," Surface review and letters Vol. 16, No. 2, pp. 259-263 (SCI, IF 0.391, DOI: 10.1142/S0218625X09012561, updated 090424).
[54]  Beomkeun Kim, Yongsu Kim, Chun, D.M., Ahn, S.H.*, Jae-Duk Jang , 2009, "Durability Improvement of Automotive V-belt Pulley ," International Journal of Automotive Technology, Korean Soc. Automotive Engineers(KSAE), Vol.10, No. 1, pp.73-77, (SCIE IF 0.515,DOI: 10.1007/s12239-009-0009-1, ISSN: 1229-9138) February .
[53]  Pandey, J.K., Chu, W.S., Kim, C.S., Lee, Caroline Sunyong, and Ahn, S.H.*, 2009, "Evaluation of Morphological Architecture of Cellulose Chains in Grass during Conversion from Macro to Nano Dimensions," e-polymers, European Polymer Federation (France), No. 102, pp. 1-15, August (SCIE, IF 0.661, ISSN: 1618-7229, JCR Impact Factor Rank: 76/82 in Polymer Science (2013)).
[52]  Hameed, Z., Hong, Y.S., Cho, Youngman, Ahn, S.H.*, and Song, Chulki, 2009, "Condition Monitoring and Fault Detection Systems of Wind Turbines and Related Algorithms: A Review ," Journal of Renewable & Sustainable Energy Reviews, Volume 13 No. 1, page 1-39, January (SCI), IF 4.075, Citation by Google Scholar 391).
[51]  Chun, D.M., Kim, M.H., Lee, J.C., and Ahn, S.H.* (Submitted by S. I. Oh), 2008, "TiO2 Coating on Metal and Polymer Substrates by Nano Particle Deposition System (NPDS)," CIRP Annals - Manufacturing Technology, TECHNISCHE RUNDSCHAU EDITION COLIBRI LTD (Switzerland), Vol. 57, No. 1, pp. 551-554, Elsevier (SCIE, IF 1.123, doi:10.1016/j.cirp.2008.03.111, ISSN: 0007-8506 ).
[50]  Park, Jong-Ha, Ryu, Sae-Hee, Lee, Caroline Sunyong*, Choa, Yong-Ho, Lee, J.C., and Ahn, S.H., 2008, "Fabrication and Simulation of a Ni-Al2O3 Crack Free Joining for Multiple Metal-Ceramic Composites Using a New Functionally Graded Material (FGM) Method," Advanced Materials Research, Scientific, Vol. 47-50, pp. 523-527, June (DOI: 10.4028/www.scientific.net/AMR.47-50.523).
[49]  Ryu, Sae-hee, Park, Jong-ha, Lee, Caroline Sunyong*, Lee, J.C., Ahn, S.H., Chae, Jae-Hong, and Riu, Doh-Hyung, 2008, "Optimization of Crack-Free Polytypoidally Joined Si3N4-Al2O3 Functionally Graded Materials (FGM) Using 3-Dimensional Modeling ," Advanced Materials Research, Scientific, Vol. 47-50, pp. 494-498, June (DOI: 10.4028/www.scientific.net/AMR.47-50.494).
[48]  Pandey, J.K., Chu, W.S., Kim, C.S., Lee, Caroline Sunyong, and Ahn, S.H.*, 2008, "Bionanocomposites of Grass," Advanced Materials Research, Trans Tech Publications, Vols. 47-50, pp. 435-438, June.
[47]  Lee, J.C., Hong, Y.S., Nan, Ri-Guang, Jang, Moon-Kyu, Lee, Caroline Sunyong, Ahn, S.H., and Kang, Yeon-Jun*, 2008, "Soundproofing Effect of Nano Particle Reinforced Polymer Composites," Journal of Mechanical Science and Technology, Springer, Vol. 22, pp. 1468-1474, April (SCIE, IF 0.258, DOI: 10.1007/s12206-008-0419-4, ISSN:1738-494X).
[46]  Chu, W.S., Jeong, S.Y., Pandey, J.K., Ahn, S.H.*, Lee, Jae-Hoon, and Chi, Sang-Chul, 2008, "Fabrication of Composite Drug Delivery System using Nano Composite Deposition System and in vivo Characterization," International Journal of Precision Engineering and Manufacturing, Korean Society for Precision Engineering, in co-publication with Springer Verlag GmbH, Vol. 9, No. 2, pp. 81-83, April (SCIE, ISSN: 1229-8557, JCR Impact Factor Rank: 33/128 in Mechanical (2013)), IJPEM Most Cited Articles Award, 2008 to 2009.
[45]  Pandey, J.K., Lee, J.W., Chu, W.S., Kim, C.S., Lee, Caroline Sunyong, and Ahn, S.H.*, 2008, "Cellulose Nanowhiskers from Grass of Korea," Macromolecular Research, The Polymer Society of Korea (Korea), Vol. 16, No. 5, pp. 396-398 (SCI, IF 1.787, ISSN: 1598-5032, JCR Impact Factor Rank: 37/82 in Polymer Science (2013)).
[44]  Chun, D.M., Kim, M.H., Lee, J.C., and Ahn, S.H.*, 2008, "A Nano-particle Deposition System for Ceramic and Metal Coating at Room Temperature and Low Vacuum Conditions," International Journal of Precision Engineering and Manufacturing, Korean Society for Precision Engineering, in co-publication with Springer Verlag GmbH, Vol.9 No.1, pp.51-53, (SCIE, ISSN: 1229-8557) January.
[43]  Lee, J.C., Park, Jong Ha, Ryu, Sae Hee, Hong, Hyun Jung, Riu, Doh Hyung, Ahn, S.H., and Lee, Caroline Sunyong*, 2008, "Reduction of Functionally graded Material Layers for Si3N4-Al2O3 System using 3-dimensional Modeling," Materials Transactions, The Japan Institute of Metals, Vol. 49, No. 4, pp. 829-834, March (SCI, IF 0.753, DOI:10.2320/matertrans.MRA2007319, ISSN:1345-9678).
[42]  Lee, Jae-Hoon, Ha, Won-Shik, Chu, W.S., Ahn, S.H., and Chi, Sang-Chul*, 2008, "Preparation of Micro-fabricated Biodegradable Polymeric Structure using NCDS," Archives of Pharmacal Research, Pharmaceutical Society of Korea (Korea), Vol. 31, No. 1, pp. 125-132, January (SCIE, IF 1.074, DOI: 10.1007/s12272-008-1130-9, ISSN: 0253-6269, JCR Impact Factor Rank: 164/256 in Pharmacology & Pharmacy (2013)).
[41]  Kim, J.S., Park, J.B., Kim, Y.M., Ahn, S.H.*, Sun, Hee-Young, Kim, Kyung-Hoon, and Song, Tae-Won, 2008, "Fuel Cell End Plates: A review," International Journal of Precision Engineering and Manufacturing, Korean Society of Precision Engineering, Vol. 9, No. 1, pp. 39-46, January (SCIE).
[40]  Chu, W.S., Jeong, S.Y., Kim, S.G., Ha, Won-Shik, Chi, Sang-Chul, and Ahn, S.H.*, 2008, "Fabrication of Biodegradable Drug Delivery System with Controlled Release Made of PLGA/5-FU/Hydroxyapatite," Rapid Prototyping Journal, Emerald Group Publishing Ltd. (England), Vol. 14, No. 5, pp. 293-299 (SCIE, IF 1.086, DOI:10.1108/13552540810907965, ISSN: 1355-2546, JCR Impact Factor Rank: 44/128 in Mechanical (2013)).
[39]  Kim, Kyung Kyoon, Kim, Jeong Suk*, Park, Jin Hyo, Hwang, Duck Kun, Choi, W.Y., Ahn, S.H., Kang, Myung-Chang , 2007, "Improvement of Surface Electrical Conductivity in Poly Carbonate," Journal of Mechanical Science and Technology Vol. 21 No. 10, pp. 1689 - 1693, October (SCIE, IF 0.258, ISSN 1738-494X).
[38]  Kim, Young-sik, Jin, WonHyeok, Ahn, S.H., and Lee, Caroline Sunyong*, 2007, "FTIR Analysis of PZT Damage during Wafer Level Transfer of Thermo-piezoelectric SI3N4 Cantilevers on the CMOS-wafer for Nano Data Storage Applications," Physica Scripta, The Royal Swedish Academy of Sciences, T. (Topical No.s) 129, pp. 213-217, November (SCI, IF 1.16).
[37]  Lee, J.C., Kang, H.J., Chu, W.S., and Ahn, S.H. (Submitted by S. I. Oh), 2007, "Repair of Damaged Mold Surface by Cold-Spray Method," CIRP Annals - Manufacturing Technology, Technische Rundschau Edition Colibri Ltd. (Switzerland), Vol. 56, No. 1, pp. 577-580, August (SCIE, IF 1.123, DOI: 10.1016/j.cirp.2007.05.138, ISSN: 0007-8506, JCR Impact Factor Rank: 3/43 in Industrial (2013)).
[36]  Lee, J.C., Chun, D.M., Ahn, S.H.*, and Lee, Caroline Sunyong, 2007, "Material Properties of Thick Aluminum Coating Made by Cold Gas Dynamic Spray Deposition," Key Engineering Materials, Scientific, Vol. 345-346, pp. 1097-1100, April (DOI: 10.4028/www.scientific.net/KEM.345-346.1097) .
[35]  Chun, D.M., Kim, H.J., Lee, J.C., Ahn, S.H.*, and Jang, J. D., 2007, "Web-based Material Database for Material Selection and Its Application Programming Interface (API) for CAD," Key Engineering Materials, Scientific, Vol.345-346, pp. 1593-1596, April (None, IF None, DOI: 10.4028/www.scientific.net/KEM.345-346.1593, ISSN: None).
[34]  Kim, S.G., Chu, W.S., Jung, W.K., and Ahn, S.H.*, 2007, "Evaluation of Mechanical and Electrical Properties of Nano Composite Parts Fabricated by Nano Composite Deposition System (NCDS)," Journal of Material Processing Technology, Elsevier Science SA (Switzerland), Vol. 187-188, pp. 331-334, June (SCIE, IF 1.143, doi:10.1016/j.jmatprotec.2006.11.209, ISSN: 0924-0136, JCR Impact Factor Rank: 6/39 in Manufacturing (2013)).
[33]  Lee, Caroline Sunyong, Kim, S.G., Kim, H.J., and Ahn, S.H.*, 2007, "Measurement of Anisotropic Compressive Strength of Rapid Prototyping Parts ," Journal of Materials Processing Technology, Elsevier Science SA (Switzerland), Vol. 187-188, pp. 627-630, June (SCIE, IF 1.143, DOI:10.1016/j.jmatprotec.2006.11.095, ISSN: 0924-0136), Citation by Google Scholar 60.
[32]  Chu, W.S., Kim, S.G., Kim, H.J., Lee, Caroline Sunyong, and Ahn, S.H.*, 2007, "Fabrication of Bio-composite Drug Delivery Device Using Rapid Prototyping Technology," Key Engineering Materials, Trans Tech Publications, Vols. 342-343, pp. 497-500, January.
[31]  Lee, H.S., Kim, H.J., Kim, S.G. and Ahn, S.H.*, 2007, "Evaluation of Graphite Composite Bipolar Plate for PEM(PROTON EXCHANGE MEMBRANE) Fuel Cell: Electrical, Mechanical, and Molding Properties," Journal of Materials Processing Technology, Elsevier Science SA (Switzerland), Vol. 187-188, pp. 425-428, June (SCIE, IF 1.143, DOI:10.1016/j.jmatprotec.2006.11.213, ISSN: 0924-0136), Citation by Google Scholar 35.
[30]  Lee, Caroline Sunyong, Kim, S.G., Ahn, S.H.*, Lutgard C. DeJonghe and Gareth Thomas, 2007, "Three Dimensional Analysis of Thermal Stress and Prediction of Failure of Polytypoidally Joined SI3N4-AL2O3 Functionally Graded Material (FGM)," Materials Transactions, The Japan Institute of Metals, Vol. 48, No. 9, pp. 2489-2493, August (SCI).
[29]  Lee, Caroline Sunyong, Kim, S.G., Jeong, S.Y., Ahn, S.H.*, Jin, Won-Hyeog, Jang, Sung-Soo, Cho, Il-Joo, Kim, Young-Sik, and Nam, Hyo-Jin, 2007, "Thermal Analysis of Micro Cantilevers Integrated with Heaters for Low Power Nano-Data Storage Application," Sensors and Actuators A, Elsevier Science SA (Switzerland), Vol. 139, No.1-2, pp.12-16, September (SCI, IF 1.434, DOI: 10.1016/j.sna.2006.10.034, ISSN 0924-4247).
[28]  Jung, W.K., Lee, H.S., Jung, Jae-Won, Ahn, S.H.*, Lee, Woo-Il, Kim, Hee-Jae, and Kwon, Jeong-Won, 2007, "Penetration mechanisms of ceramic composite armor made of alumina/GFRP," International Journal of Precision Engineering and Manufacturing, Vol. 8. No. 4, pp. 38-44., October (SCIE).
[27]  Kang, H.J., and Ahn, S.H.*, 2007, "Fabrication and Characterization of Micro parts by Mechanical Micro Machining: Precison and Cost Estimation," Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Professional Engineering Publishing, Vol. 221, No. 2, pp.231-240, February (SCI).
[26]  Chu, W.S., Kim, S.G., Jung, W.K., Kim, H.J., Ahn, S.H.*, 2007, "Fabrication of Micro Parts using Nano Composite Deposition System," Rapid Prototyping Journal, Emerald Group Publishing Ltd. (England), Vol. 13, No. 5, pp. 276-283, June (SCIE, IF 1.086, DOI: 10.1108/13552540710824779, ISSN: 1355-2546, JCR Impact Factor Rank: 44/128 in Mechanical (2013)).
[25]  Jung, W.K., Ahn, S.H.*, Ahn, Bierng-Chearl, Park, Seoung-Bae and Won, Myung-Shik, 2007, "Fabrication of Radar Absorbing Structure and Evaluation of Radar Cross Section: Case Study of Hybrid Shells," Journal of Composite Materials, SAGE PUBLICATIONS LTD (England) Vol. 41, No. 11, pp. 1375-1387 (SCI, IF 1.034, DOI: 10.1177/0021998306068084, ISSN 0021-9983).
[24]  Jung, W.K., Chu, W.S., Ahn, S.H.*, and Won, Myung-Shik, 2007, "Measurement and Compensation of Spring-back of Hybrid Composite Beam," Journal of Composite Materials, SAGE Publications Ltd. (England), Vol. 41, No. 7, pp. 851-864, March (SCI, IF 1.034, DOI: 10.1177/0021998306067064, ISSN: 0021-9983, JCR Impact Factor Rank: 9/24 in Composites (2013)).
[23]  Lee, C.S., Ahn, S.H., Lutgard C. DeJonghe, and Gareth Thomas, 2006, "Computational Analysis of Residual Stress for Si3N4-Al2O3 Joint Using Polytypoid Functional Gradients," Surfaces, Interfaces, and the Science of Ceramic Joining, (eds K. S. Weil, I. E. Reimanis and C. A. Lewinsohn), John Wiley & Sons, Inc., Hoboken, NJ, USA, Vol. 158, pp.111-122.
[22]  Kim, H.J., Chu, W.S., Ahn, S.H.*, Kim, Dong-Soo, and Jun, Cha-Soo, 2006, "Web-based Design and Manufacturing Systems for Micro Machining: Comparison of Architecture and Usability," Journal of Computer Applications in Engineering Education, John Wiley & Sons Inc. (USA), Vol. 14, No. 3, pp. 169-177, September (SCIE, IF 0.338, DOI:10.1002/cae.20076, ISSN: 1061-3773, JCR Impact Factor Rank: 70/87 in Multidisciplinary (2013)).
[21]  Jung, W.K., Kim, Beomkeun, Won, Myung-Shik, and Ahn, S.H.*, 2006, "Fabrication of Radar Absorbing Structure (RAS) Using GFR-Nano Composite and Spring-back Compensation of Hybrid-Composite RAS Shells ," Composite Structures, Elsevier SCI LTD. Vol.75, No.s 1-4, pp. 571-576, September (SCIE).
[20]  Jung, W.K., Ahn, S.H.* and Won, Myung-Shik, 2006, "Effect of Nano Particles and Ion Implantation on the Electromagnetic Shielding of Glass/Epoxy Composites," Journal of Composite Materials, SAGE Publications LTD (England), Vol. 40, No. 2, pp. 175-188, January (SCI).
[19]  Kang, H.J., Ahn, S.H.*, Lee, Jae-Sang, and Lee, Jae-Hyung, 2006, "Surface Modification of Aluminum by Nitrogen-Ion Implantation," International Journal of Precision Engineering and Manufacturing, Vol. 7. No. 1, pp. 57-61, January (SCIE).
[18]  Lee, Caroline Sunyong, Ahn, S.H.*, Lutgard C. DeJonghe, and Gareth Thomas, 2006, "Effect of Functionally Graded Material (FGM) layers on the Residual Stress of Polytypoidally Joined Si3N4-Al2O3," Materials science and Engineering Part A, Vol. 434, No. 1-2, pp. 160-165 (SCI, IF 1.490).
[17]  Chu, W.S., Baek, Chang-Il, Ahn, S.H.*, and Cho, Tae-Hwan, 2006, "Rapid Prototyping of 3D Micro Rockets Using Mechanical Micro Machining," Journal of Mechanical Science and Technology, Korean Society of Mechanical Engineers (Korea), Vol. 20, No. 1, pp. 2405-2413, January (SCIE, IF 0.258, ISSN: 1738-494X, JCR Impact Factor Rank: 79/128 in Mechanical (2013)).
[16]  Kang, H.J. and Ahn, S.H., 2005, "Surface Modification of Aluminum for Mold by Nitrogen Ion Implantation," Transactions of the North American Manufacturing Research Institution of SME, Vol. 33, pp. 305-317 (NAMRC, New York, USA, May 24-27).
[15]  Ahn, S.H.*, Kim, Dong-Soo, Chu, W.S., and Jun, Cha-Soo, 2005, "MIMS: Web-based Micro Machining Service," International Journal of Computer Integrated Manufacturing, Taylor & Francis Ltd. (England), Vol. 18, No. 4, pp. 251-259, June (SCIE, IF 0.722, DOI: 10.1080/09511920400030187, ISSN: 0951-192X, JCR Impact Factor Rank: 23/39 in Manufacturing (2013)).
[14]  Kim, Gyung-Dong, Kang, H.J., Ahn, S.H.*, Song,Chul Ki, Baek, Chang Il, and Lee, Caroline Sunyong, 2005, "Laser-marking Process for Liquid Crystal Display Light Guide Panel," Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers Part B, Short Communications in Manufacture and Design, Vol. 219, No. 7, pp. 265-270, July (SCI).
[13]  Chu, W.S. and Ahn, S.H.*, 2005, "Internet-based Composite Repair," Journal of Composite Materials, SAGE Publication Ltd. (England), Vol. 39, No. 9, pp. 827-845, May, (SCI, IF 1.034, DOI: 10.1177/0021998305048159, ISSN: 0021-9983, JCR Impact Factor Rank: 9/24 in Composites (2013)).
[12]  Ahn, S.H., Lee, Caroline Sunyong, and Jung, Woobyok, 2004, "Development Translucent FDM Parts by Post-processing," Rapid Prototyping Journal, Vol. 10, No. 4, pp. 218-224, August (SCIE, IF 1.086, DOI: 10.1108/13552540410551333, ISSN 1355-2546).
[11]  Ahn, S.H., Baek, Changil, Lee, Caroline Sunyong., and Ahn, In Shup, 2003, "Anisotropic Tensile Failure Model of Rapid Prototyping Parts -Fused Deposition Modeling (FDM)," International Journal of Modern Physics B, Vol. 17, No. 4, pp. 1510-1516, April (SCI, IF 0.558, DOI: 10.1142/S0217979203019241, ISSN 0217-9792).
[10]  Ahn, S.H., McMains, S., Sequin, C. S., and Paul K. Wright*, 2002, "Mechanical Implementation Services for Rapid Prototyping," Journal of Engineering Manufacture, Proceedings of the Institution of Mechanical Engineers Part B, Short Communications in Manufacture and Design, Vol. 216, pp. 1193-1199, August (SCI, 0.281).
[9]  Ahn, S.H., Michael Montero, Dan Odell, Shad Roundy, and Paul K. Wright, 2002, "Anisotropic Material Properties of Fused Deposition Modeling (FDM) ABS," Rapid Prototyping Journal, Vol. 8, No. 4, pp. 248-257, August (SCIE), Highly Commended Award, Citation by Google Scholar 133.
[8]  Ahn, S.H., Balaji Bharadwaj, Humayun Khalid, Liou, Shuh-Yuan, and Wright, Paul. K., 2002, "Web-based Design and Manufacturing Systems for Automobile Components: Architectures and Usability Studies," International Journal of Computer Integrated Manufacturing, Vol. 15, No. 6, pp. 555-563, November (SCIE), Citation by Google Scholar 31.
[7]  Ahn, S.H. and Paul K. Wright, 2002, "Reference Free Part Encapsulation (RFPE): An Investigation of Material Properties and the Role of RFPE in a Taxonomy of Fixturing Systems," Journal of Manufacturing Systems, Society of Manufacturing Engineers, Vol. 21, No. 2, pp. 101-110, November (SCIE).
[6]  David Dornfeld, Paul K. Wright, Shad Roundy, Arvind Rangarajan, and Ahn, S.H., 2001, "Agent Interaction in CAD/CAM," Transaction of NAMRI/SME, Vol. 29, pp. 569-575, May.
[5]  Ahn, S.H., V. Sundararajan, Charles Smith, Balaji Kannan, Roshan D'Souza, Ganping Sun, Kim, JaeHo, Sara McMains, Jordan Smith, Ashish Mohole, Carlo H. Sequin, and Paul K. Wright, 2001, "CyberCut: An Internet Based CAD/CAM System," ASME Journal of Computing and Information Science in Engineering, Vol. 1, No. 1., pp. 52-59, March, Invited Paper to Journal Inauguration, Citation by Google Scholar 81.
[4]  Ahn, S.H. and George S. Springer, 1998, "Repair of Composite Laminates -II: Models," Journal of Composite Materials, Vol. 32, No. 11, pp. 1076-1114, June (SCI).
[3]  Ahn, S.H. and George S. Springer, 1998, "Repair of Composite Laminates -I: Test Results," Journal of Composite Materials, Vol. 32, No. 11, pp. 1036-1074, June (SCI), Citation by Google Scholar 35.
[2]  Sarrazin, Hugo, Kim, Beomkeun, Ahn, S.H., and George S. Springer, 1995, "Effect of Processing Temperature and Layup on Springback," Journal of Composite Materials, Vol. 29, No. 10, pp. 1278-1295, July (SCI), Citation by Google Scholar 49.
[1]  Ahn, S.H., Lee, Woo Il, and George S. Springer, 1995, "Measurement of the Three-Dimensional Permeability of Fiber Preforms Using Embedded Fiber Optic Sensors," Journal of Composite Materials, Vol. 29, No. 6, pp. 714-733, April (SCI), Citation by Google Scholar 89.
Copyright(c) 2015 Innovative Design & Integrated Manufacturing Lab.   ALL RIGHTS RESERVED.
Department of Mechanical & Aerospace Engineering, Building 313, Room 323, Seoul National University,
Gwanak-Ro 1, Gwanak-Gu, Seoul, 08826, Korea
TEL 82-2-880-9073, 82-2-880-1683, 82-2-886-9074, 82-2-887-9075   FAX 82-2-888-9073
Web Master : Ha Young, Kim   E-Mail : kimha8812@gmail.com