인명 검색은 member 페이지에서 가능합니다.
* Copyright of the publications is belong to each publisher. Pdf files in this website are only for members.
[85]  Quan, Y.J., 2019, "Stretchable Diffractive Structural Colors via Nanoimprinting with Focused Ion Beam (FIB) Milling Process," Ph. D. Thesis, College of Engineering, Seoul National University..
[84]  Yu, J. H., 2019, "Monitoring of Milling Processes through Measurement of Power Consumption," Master thesis, College of Engineering, Seoul National University.
[83]  Park, S., 2019, "Portable Vaccine Carrier and Cold Chain Monitoring System using SMS Communication for Developing Countries," Master thesis, College of Engineering, Seoul National University.
[82]  Kim, H.S., 2019, "Shape Memory Alloy Driven Undulatory Locomotion of Soft Biomimetic Ray Robot," Ph. D. Thesis, College of Engineering, Seoul National University.
[81]  Song, J.H., 2019, "A Nanoparticle Laser Patterning Process to Fabricate Flexible Electronics," Ph. D. Thesis, College of Engineering, Seoul National University.
[80]  Kim, M., 2019, "실리콘 카바이드 가공을 위한 레이저-폴리싱 융복합 공정 (Hybrid Laser-Polishing Process for Machining Silicon Carbide)," Doctoral Dissertation, College of Engineering, Seoul National University..
[79]  Lee, J. C., 2018, "모바일 디바이스 알루미늄 케이스의 박판 가공 조건 최적화," Master thesis, 공학전문대학원.
[78]  Yang, B. I., 2018, "알루미늄 소재의 수직 밀링 가공에서 엔드밀 공구의 칩 포켓 크기에 따른 절삭 성능 평가," Master thesis, 공학전문대학원.
[77]  Byun, H. S., 2018, "충격 조건 하 휴대폰 파손 방지를 위한 디자인 가이드 연구," Master thesis, 공학전문대학원.
[76]  Choi, I.G., 2018, "Accelerated Life Test of Electrochromic Devices using Charge Balance Control," Master thesis, College of Engineering, Seoul National University.
[75]  Kim, T.J.Y., 2018, "Energy Monitoring System for Smart Factory Applications in Textile Industries," Master thesis, College of Engineering, Seoul National University.
[74]  Park, H.B., 2018, "Design and Analysis of Artificial Muscle Robotic Elbow Joint using Shape Memory Alloy Actuator," Master thesis, College of Engineering, Seoul National University.
[73]  Kim, M.S., 2018, "Fabrication and Control of Bio-mimetic Flapping Ornithopter Using Smart Soft Composite," Master thesis, College of Engineering, Seoul National University.
[72]  Mun, J.W., 2018, "IoT based Vaccine Carrier Monitoring and Self-Learning Algorithm to Optimize Power Consumption in Developing Countries," Master thesis, College of Engineering, Seoul National University.
[71]  Oh, J.W., 2018, "Design and Study of Hybrid Actuator using Smart Soft Composite and Ionic Polymer-Metal Composite," Master thesis, College of Engineering, Seoul National University.
[70]  Lee, K.I., 2018, "Fabrication of Nanostructure via Localized Focused Ion Beam-Chemical Vapor Deposition (FIB-CVD)," Ph. D. Thesis, College of Engineering, Seoul National University.
[69]  Park, S.I., 2018, "Fabrication of Electrochromic Device Using Nano-particle Deposition System and Its Response Time Modeling for Large-area (1m2 Class) Application," Ph. D. Thesis, College of Engineering, Seoul National University.
[68]  Kim, M.S., 2018, "Optically Actuated Micro Robot Made of Shape Memory Alloy," Ph. D. Thesis, College of Engineering, Seoul National University.
[67]  Iakovleva, A., 2017, "Manufacturing and evaluation of soft morphing flow separator of car," Master thesis, College of Engineering, Seoul National University.
[66]  Li, T., 2017, "Tunable Plasmonic Color Printing by Focused Ion Beam Nanofabrication," Master thesis, College of Engineering, Seoul National University.
[65]  Kim, N.G., 2017, "Development of a Morphing Flap Using a Smart Soft Composite Actuator," Master thesis, College of Engineering, Seoul National University.
[64]  Kim, S.H., 2017, "Characteristic of CeO2 Film Deposited by Nano Particle Deposition System and Its Electrochromic Application," Master thesis, College of Engineering, Seoul National University.
[63]  Lee, J.Y., 2017, "Monitoring of Off-Grid Renewable Energy Systems and a Load Oriented Model for Energy Production and Consumption," Ph. D. Thesis, College of Engineering, Seoul National University.
[62]  Lee, H.T., 2017, "Design, Fabrication and Evaluation of High Speed Microscale Shape Memory Alloy Actuator," Ph. D. Thesis, College of Engineering, Seoul National University..
[61]  Han, M.W., 2017, "Soft Morphing Textile Actuators Using Shape Memory Effect," Ph. D. Thesis, College of Engineering, Seoul National University.
[60]  Song, D.S., 2016, "Room-temperature fabrication of flexible thermoelectric generator using dry-spray deposition system," Master thesis, College of Engineering, Seoul National University.
[59]  Kim, H.I., 2016, "Development of Soft Robot Hand with Smart Soft Composites and Shape Memory Alloy," Master thesis, College of Engineering, Seoul National University.
[58]  Song, S.H., 2016, "Multi-mode High-speed Actuator using Smart Soft Composite," Ph. D. Thesis, College of Engineering, Seoul National University.
[57]  Choi, J.O., 2016, "Development of Hybrid Process using Laser and Dry Particle Deposition System," Ph. D. Thesis, College of Engineering, Seoul National University.
[56]  Kim, E.S., 2016, "Characteristics of Hybrid Process Using Dry Nanoparticle Deposition and Micromachining," Masters Thesis, Seoul National University.
[55]  Wang, W., 2016, "Deployable Soft Composite Structures with Morphing and Shape Retention," Ph. D. Thesis, Seoul National University.
[54]  Shin, Y.J., 2015, "Modeling of Specific Energy Consumption and Reduction Strategies for Lathe Machine Tools," Master thesis, College of Engineering, Seoul National University.
[53]  Poudel, S.R., 2015, "Design and Manufacturing of 3D Printed Propeller Turbine for Pico Hydro Applications," Master thesis, College of Engineering, Seoul National University.
[52]  Kim, S.Y., 2015, "Radiant Floor Heating Material with Thermal Storage using Microencapsulated PCM," Master thesis, College of Engineering, Seoul National University.
[51]  Rodrigue, H., 2015, "Design and Manufacturing of Twisting Soft Composite Actuators with Shape Memory Alloy Wires," Ph. D. Thesis, College of Engineering, Seoul National University.
[50]  Lee, J.C., 2015, "Sintering Behavior and Material Prosperities of Nickel/Alumina Functionally Graded Materials Fabrication by Pressur eless Sintering Method," Ph. D. Thesis, College of Engineering, Seoul National University.
[49]  Yan, J., 2015, "Soundproofing and Mechanical Properties of Nanofiller-reinforced Polypropylene Composites," Ph. D. Thesis, College of Engineering, Seoul National University.
[48]  Yoon, H.S., 2015, "Hybrid 3D Printing by Bridging Micro/Nano Processes," Ph. D. Thesis, College of Engineering, Seoul National University.
[47]  Shim, J.E., 2014, "Development of a twisting actuator using a single SMA wire," Masters Thesis, Seoul National University.
[46]  Bhandari, B., 2014, "Design and Evaluation of Tri-Hybrid Renewable Energy System (THRES)," Ph.D thesis, Seoul National University.
[45]  Park, J.I., 2014, "Additive manufacturing of flexible piezoelectric energy harvester using ceramic-elastomer composite," Master thesis, Seoul National University.
[44]  Lee, K.T., 2014, "Design Guide and Cost Estimation of Micro Hydro-Solar-Wind Hybrid Renewable Energy System for Off-grid Villages," Ph. D. Thesis, Seoul National University.
[43]  Bilegt, E., 2014, "Evaluation of Planarization Process of Nanostructure Deposited by Nano Particle Deposition System (NPDS)," Master thesis, Seoul National University.
[42]  Kim, H.S., 2014, "Design and Fabrication of Biomimetic Ray-like Robot using Smart Soft Composite," Master thesis, Seoul National University..
[41]  Lee, J.H., 2013, "A study on performance analysis of resin impregnation to bipolar plate in high-temperature phosphoric acid fuel cell (PAFC)," Master thesis, Seoul National University.
[40]  Lee, G.Y., 2013, "Multi-material direct printing by pulsed-nano particle deposition system (P-NPDS)," Ph.D thesis, Seoul National University.
[39]  Moon, J.S., 2013, "Effect of backstitch tool path on machinability of micro-drilling for printed circuit board," Master thesis, Seoul National University.
[38]  Lee, J.C., 2013, "Accelerated life test of micro drill and micro end mill for printed circuit board," Master thesis, Seoul National University.
[37]  Kim, M.S., 2013, "Effect of hybrid nanocomposites on soundproofing and electromagnetic interference shielding," Ph.D thesis, Seoul National University.
[36]  Kim, C.S., 2013, "Nanoscale 3D printing process using nano particle deposition system and focused ion beam," Ph.D thesis, Seoul National University.
[35]  Pham, M.Q., 2013, "Characteristics of Ionic liquid as lubricant in micro milling," Master thesis, Seoul National University.
[34]  Han, M.W., 2013, "Fabrication of Morphing Structure Using Woven type Smart Soft Composite," Master Thesis, College of Engineering, Seoul National University.
[33]  Kim, D.H., 2012, "Regression analysis of focused ion beam induced deposition influenced by scan strategies," Master thesis, Seoul National University.
[32]  Hong, Y.S., 2011, "Tool wear monitoring of micro end mill using wavelet packet transform and hidden Markov model," Ph. D. Thesis, Seoul National University..
[31]  Kim, M.S., 2011, "Manufacturing of flexible dye-sensitized solar cell (DSSC) using nano particle deposition system (NPDS)," Ph. D. Thesis, Seoul National University..
[30]  Kim, J.S., 2011, "Fabrication of 3D soft morphing structure using Shape Memory Alloy (SMA) wire/polymer skeleton composite," Master thesis, Seoul National University.
[29]  Lee, K.E., 2011, "Machinability Evaluation of Micro End Mills for Printed Circuit Board : A Case Study of Solid insert and Brazing Types," Master thesis, Seoul National University.
[28]  Wu, R., 2011, "Shape fixable Woven Smart Structure (WSS) using phase change of hybrid materials," Master thesis, Seoul National University.
[27]  Kim, H.J., 2011, "Smart Soft-morphing Structure: Design, Manufacturing, and Application," Ph. D. Thesis, Seoul National University.
[26]  Wie, K.H., 2010, "A tool-path generation algorithm for 5-axis laser milling machine with interference avoidance and OMM-based post-machining," Master thesis, Seoul National University.
[25]  Kim, J.W., 2010, "Optimal Shape Design of a Drill Flute Using Design of Experiment," Master thesis, Seoul National University.
[24]  Jung, B.S., 2010, "Fabrication of Smart Structure Using Shape Memory Alloy Wires Embedded Composite," Master thesis, Seoul National University.
[23]  Chun, D.M., 2010, "Development of nano particle deposition system (NPDS) for room temperature deposition of metals and ceramics and its applications," Ph. D. Thesis, Seoul National University.
[22]  Kim, M.H., 2009, "Development of a Rotational Ablating Tool for Calcified Atherosclerotic Plaque Removal," Master thesis, Seoul National University.
[21]  Lee, C.W., 2009, "Estimation of Sound Transmission Loss of Multilayered Panel by Vibration Measurement," Master thesis, Seoul National University.
[20]  Kang, D.W., 2009, "Error Analysis and Optimization of Beamforming Method associated with Measurement of Acoustic Impedance in Free Field," Master thesis, Seoul National University.
[19]  Kim, Y.M., 2009, "Evaluation of Shape Memory Alloy(SMA) Embedded Glass/Epoxy Composite for Repetitive Actuations ," Master thesis, Seoul National University.
[18]  Chu, W.S., 2009, "Implantable Drug Delivery System Using Layered Manufacturing Methods," Ph. D. Thesis, Seoul National University.
[17]  Park, J.B., 2009, "Machinability Evaluation of Micro Endmill for Printed Circuit Board," Master thesis, Seoul National University .
[16]  Jeong, S.Y., 2008, "Thermal Analysis and Reduction in Power Consumption of Micro-Cantilevers for NDSS (Nano Data Storage System)," Master thesis, Seoul National University.
[15]  Lee, J.W., 2008, "Study of Mechanical Properties and Soundproof of ABS/Carbon Black Composites Using Design of Experiment," Master thesis, Seoul National University.
[14]  Hameed, Z., 2008, "Multivariate Analysis for Fault Detection and Classification with Support Vector Machines (SVM) and Self-Organizing Maps (SOMs) by Using Statistical Time Domain Features for Rolling Element Bearings," .
[13]  Kim, J.S., 2008, "Development of Glass-Fiber/Epoxy End Plates in High Temperature Proton Exchange Membrane Fuel Cell to Reduce Startup Time," Master thesis, Seoul National University.
[12]  Choi, W.Y., 2008, "Fabrication of Electromagnetic Wave absorbing materials and Structure for Repeat Antenna," Thesis.
[11]  Kim, S.G., 2007, "Fabrication of Nano Composite Parts Using Nano Composite Deposition System," Master thesis, Seoul National University.
[10]  Kim, S.H., 2007, "Tool path generation for 3D laser engraving machine," Master's thesis, Seoul National University.
[9]  Kang, Y.C., 2007, "Computer-Aided Environmental Design System for EuP (Energy-using Product) Directive," 학위논문, 학위논문.
[8]  Lee, H.S., 2007, "Compression molding of graphite composite bipolar plate for PEM (Proton Exchange Membrane) fuel cell," 석사학위 논문, 서울대학교.
[7]  Kang, H.J., 2006, "Fabrication and Characterization of Micro parts by Mechanical Micro Machining," 석사학위 논문, 서울대학교.
[6]  Jung, W.K., 2006, "Fabrication and Shape Compensation of Radar Absorbing Structure Made of Hybrid Composite Materials," 석사학위 논문, 서울대학교.
[5]  Kim, S.H., 2005, "Fabrication of microchannel using micro-endmill and measurement of microfluidic characteristics," Bachelor's Thesis, Seoul National University.
[4]  백창일, 2004, "마이크로머시닝을 사용한 미세형상의 제작," 석사학위 논문, 경상대학교 (공동지도교수).
[3]  Chu, W.S., 2004, "웹기반 설계 및 생산 시스템 구축," 석사학위 논문, 경상대학교 (공동지도교수).
[2]  정광조, 2003, "기계 주조용 알루미늄 합금(7075T6)의 마찰 마멸 특성에 미치는 세라믹 코팅에 관한 연구," 석사학위 논문, 경상대학교 (공동지도교수).
[1]  Ahn, S.H., 1997, "Repair of Composite Laminates," Ph.D. Thesis, Stanford University.
Copyright(c) 2020 Innovative Design & Integrated Manufacturing Lab.   ALL RIGHTS RESERVED.
Department of Mechanical & Aerospace Engineering, Building 313, Room 323, Seoul National University,
Gwanak-Ro 1, Gwanak-Gu, Seoul, 08826, Korea
TEL 82-2-880-9073, 82-2-880-1683, 82-2-886-9074, 82-2-887-9075
Web Master : Ying-Jun Quan & Ha Young Kim   E-Mail : jeonyj710@snu.ac.kr & kimha8812@gmail.com